Powerful APC SRT3000XLI: Ultimate Power Protection

Businesses that depend on clean, uninterrupted power for servers and networking equipment need protection that goes beyond simple battery backup. The APC Smart-UPS SRT3000XLI provides 3kVA/2700W of true double-conversion online protection at 230V. It delivers consistent, regulated power quality that basic UPS systems can’t match.

Introducing the SRT3000XLI

The SRT3000XLI is part of APC’s Smart-UPS SRT series, which provides high-density, double-conversion online power protection with scalable runtime. It is designed for IT professionals and network administrators who want a wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction. It suits small and mid-sized server rooms and networking environments, and it fits businesses that have outgrown line-interactive units.

Double-Conversion Technology in the SRT3000XLI

The SRT3000XLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. The pure sine wave output has zero transfer time, so sensitive equipment stays protected at all times. A wide input range, 100V to 275V, and a frequency window of 40 to 70Hz keep the unit off battery through serious swings, including generator supply.

Consistent Power Quality with the SRT3000XLI

Because it conditions power continuously, the SRT3000XLI shields servers, storage, and networking gear from sags, surges, frequency fluctuation, and harmonic distortion. Equipment sees steady power, which helps prevent instability, unexpected reboots, and premature hardware wear. A 340-joule surge energy rating adds further protection.

Outlets and Connectivity on the SRT3000XLI

The unit has eight IEC C13 outlets and two IEC C19 outlets, plus two IEC jumper cables. That covers servers, switches, and higher-draw devices from one unit. A SmartSlot accepts an optional Network Management Card, and USB and RJ-45 serial ports are included. A multifunction LCD shows status and settings, and management software ships with the unit.

Battery Backup and Scalable Runtime on the SRT3000XLI

The internal battery (505VAh) provides about 4 minutes at full load and about 12 minutes at half load. That is enough for a safe shutdown or a generator handover. For longer outages, you can add up to 10 external SRT96BP battery packs, which can stretch runtime to several hours. The battery recharges in about 3 hours.

High Efficiency of the SRT3000XLI

Efficiency is about 93.5%, and a green mode bypasses unused components in good power conditions to reach very high efficiency without sacrificing protection. Premium online protection doesn’t have to carry the energy overhead older online UPS designs did, so running costs stay manageable.

Reliability and Serviceability Features of the SRT3000XLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, automatic battery tests, and audible and visible alarms add control and early warning. The tower is rack/tower convertible, with rail kits sold separately, and it weighs about 31.3kg. A 3-year warranty is listed for the unit.

Who Should Choose the SRT3000XLI

The SRT3000XLI suits small and mid-sized businesses and IT departments running servers, storage, or networking equipment that demand consistent, high-quality power protection. It is especially valuable for organizations that have outgrown basic line-interactive UPS units and want true online protection.

Final Thoughts on the SRT3000XLI

For businesses that treat power quality as part of their IT strategy, the APC Smart-UPS SRT3000XLI is a dependable, high-performance solution. True double-conversion technology, 93.5% efficiency, and expandable runtime make it a smart investment for growing server rooms and networks. For organizations that want premium, business-grade protection at 3kVA, it is a capable, trustworthy choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT6KXLI 6000VA: Ultimate Protection

Businesses that run dense server or networking loads need continuous, regulated power that holds up even in unstable grid conditions. The APC Smart-UPS SRT6KXLI provides 6kVA/6kW of true double-conversion online protection at 230V. It is an extended-runtime model for places where power quality and uptime really matter.

Introducing the SRT6KXLI

The SRT6KXLI is part of APC’s Smart-UPS SRT series, which delivers high-density, true double-conversion online power protection in a pure sine wave tower. It suits servers, storage, voice and data networks, and other critical equipment in server rooms and small data centers. It provides ten outlets (six IEC C13 and four IEC C19), two IEC jumper cables, a SmartSlot, and a Network Management Card.

Double-Conversion Technology in the SRT6KXLI

The SRT6KXLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. Output is a clean sine wave with only 3% total harmonic distortion and zero transfer time. Equipment is isolated from grid instability at all times, not only in a full outage. A wide input range, 100V to 275V, keeps the unit off battery through serious voltage swings.

Power Quality and Efficiency of the SRT6KXLI

Double-conversion efficiency is about 94.4%, which keeps energy costs down for an online UPS. Green mode bypasses unused electrical components in good power conditions to reach very high efficiency without losing protection. Input power factor correction reduces installation cost by allowing smaller generators and cabling.

Scalable Runtime of the SRT6KXLI

The built-in 192V battery gives about 2.5 minutes at full load and about 8.7 minutes at half load. That covers a controlled shutdown or a generator handover. When business-critical systems need runtime in hours, you can add up to 10 external battery packs, which scales backup duration to your outage risk without replacing the UPS. The battery recharges in about 1.5 hours.

Hot-Swappable, Intelligently Managed Batteries in the SRT6KXLI

The batteries are hot-swappable and user-replaceable, using APCRBC140 cartridges, and they typically last 3 to 5 years. Temperature-compensated charging and intelligent battery management maximize battery performance and life. Battery failure notification provides early-warning analysis, so replacement happens on your schedule.

Reliability Features of the SRT6KXLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, a temperature probe, and audible alarms add control and warning. Surge protection is rated at 480 joules.

Remote Monitoring and Manageability of the SRT6KXLI

The included Network Management Card enables remote monitoring and management of power status, battery health, and load. USB, RS-232, and contact-closure interfaces provide local connections. Teams can spot developing issues early, before they become downtime.

Installation Notes for the SRT6KXLI

The unit uses a hardwired input, so a qualified electrician should install it. It is a heavy tower, and a 55 dB noise level suits a server room better than an open office. A 3-year warranty covers the unit.

Who Should Choose the SRT6KXLI

The SRT6KXLI suits businesses running dense server racks, virtualization hosts, or other equipment sensitive to power quality. It is especially valuable in finance, healthcare, and data services, where consistent uptime and clean power drive business results.

Final Thoughts on the SRT6KXLI

When protecting high-density, business-critical equipment, compromise isn’t an option. The APC Smart-UPS SRT6KXLI delivers premium double-conversion protection with 94.4% efficiency, scalable runtime, and strong remote management. For businesses that need uncompromising power protection at 6kVA, it is a dependable, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 20kVA: Ultimate Protection

For organizations that have outgrown single-phase UPS units but don’t need a large enterprise system, the 20kVA range is a well-matched entry into centralized three-phase protection. The APC Smart-UPS VT SUVTP20KH4B4S provides 20kVA/16kW of true online three-phase protection at 400V, backed by the reliability of the Smart-UPS family.

Introducing the SUVTP20KH4B4S

The SUVTP20KH4B4S is a tower-format dual-conversion online UPS for small data centers, larger offices, and other environments with dense power requirements. With 20kVA of capacity and 16kW of output, it supports meaningful IT loads, such as multiple servers, networking racks, or critical facility systems, from one centralized unit. You avoid a patchwork of smaller UPS devices.

Three-Phase, Dual-Mains Architecture of the SUVTP20KH4B4S

The unit works on three-phase input and output at 400V, so it integrates directly with standard commercial three-phase electrical systems. A dual-mains input lets it draw from two separate power sources. That improves availability and reduces the risk that a single feed failure disrupts protected equipment.

Extended Battery Runtime on the SUVTP20KH4B4S

Built with four battery modules installed, the SUVTP20KH4B4S is an extended-runtime model. It typically delivers about 12 to 22 minutes of backup at full load, and considerably longer at half load. That gives IT and facility teams time to run safe shutdowns or hand over to generator power in a longer outage.

Hot-Swappable, User-Replaceable Batteries in the SUVTP20KH4B4S

Batteries are hot-swappable and user-replaceable, and they can be changed without tools or interruption to protected equipment. That cuts mean time to repair and lets trained staff handle battery maintenance directly instead of waiting for vendor visits.

Automatic Bypass and Fault Protection on the SUVTP20KH4B4S

An automatic internal bypass supplies utility power to connected loads if the UPS overloads or faults. That keeps connected equipment running even if the UPS itself has an internal problem, which adds a layer of resilience.

Parallel Capability and Remote Management of the SUVTP20KH4B4S

Parallel-capacity and parallel-redundant configurations let several units combine for more capacity or added redundancy as you grow. With APC’s Network Management Card, SNMP-manageable connectivity gives IT teams remote visibility into status, battery health, and load.

Who Should Choose the SUVTP20KH4B4S

The SUVTP20KH4B4S suits small data centers, larger offices, and regional facilities that need dependable, centralized three-phase protection without a much larger enterprise system. It is especially valuable for organizations that want dual-mains resilience, extended runtime, and the flexibility to scale capacity in parallel.

Final Thoughts on the SUVTP20KH4B4S

For businesses moving beyond rack-level UPS protection, the APC Smart-UPS VT SUVTP20KH4B4S is a dependable, proven entry point into centralized three-phase protection. Dual-mains input, hot-swappable batteries, automatic bypass, and solid extended runtime deliver the resilience small data centers and regional offices depend on. For organizations ready to scale their power protection strategy, it is a smart, dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 30kVA: Ultimate Protection

Businesses with dense power requirements, such as small data centers, large retail operations, and regional offices, need protection that scales to match the infrastructure it guards. The APC Smart-UPS VT SUVTP30KH4B4S provides 30kVA/24kW of centralized three-phase protection at 400V. It is built on the double-conversion architecture that made the Smart-UPS family a proven name.

Introducing the SUVTP30KH4B4S

The SUVTP30KH4B4S is a dual-conversion online tower UPS for environments with dense power requirements, including small data centers, large retail stores, and regional offices. With 30kVA of capacity and 24kW of output, it supports substantial IT loads from one centralized system. You don’t need several smaller rack-level units scattered across a facility.

Dual-Mains Input and Bypass Protection in the SUVTP30KH4B4S

The unit has a dual-mains input, so it can connect to two separate power sources and improve system availability. Automatic and manual maintenance bypass reduce installation cost and keep the UPS supporting connected equipment even during internal servicing. That limits exposure to unplanned downtime.

Scalable, Hot-Swappable Battery Runtime on the SUVTP30KH4B4S

Backup runtime ranges from about 6 to 12 minutes at full load, and from about 18 to 32 minutes at half load, depending on configuration. Hot-swappable battery modules let you extend or maintain runtime without powering the system down. Facility teams can scale backup duration as operations change.

Intelligent Battery Management in the SUVTP30KH4B4S

Intelligent battery management uses precision charging to maximize battery performance, life, and reliability. That reduces the risk of unexpected capacity loss over time, so the system delivers its rated runtime when you need it.

Frequency and Voltage Regulation with the SUVTP30KH4B4S

Built-in frequency and voltage regulation corrects poor power conditions without drawing on battery reserves. That preserves battery life while keeping output quality consistent for connected equipment. It matters most in regions where grid quality is inconsistent even outside of full outages.

Parallel Capability and Network Management on the SUVTP30KH4B4S

Parallel-capacity and parallel-redundant configurations let several units work together for more capacity or system redundancy as infrastructure grows. With APC’s Network Management Card, SNMP-manageable connectivity gives IT and facility teams remote visibility and control over status and performance.

Who Should Choose the SUVTP30KH4B4S

The SUVTP30KH4B4S suits small data centers, large retail stores, regional offices, and other environments with dense, centralized power needs. It is especially valuable for organizations that need dual-mains resilience, scalable runtime, and the option to expand in parallel as infrastructure grows.

Final Thoughts on the SUVTP30KH4B4S

For businesses that need serious, centralized three-phase protection, the APC Smart-UPS VT SUVTP30KH4B4S combines dual-mains resilience, intelligent battery management, and scalable runtime. Built on a Smart-UPS family with millions of units installed worldwide, it is a dependable choice for dense, business-critical power environments. For organizations ready to invest in centralized three-phase protection, it is a strong, capable solution.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 40kVA: Ultimate Power Defense

When power protection has to scale beyond rack-level UPS units, businesses turn to systems built for centralized, three-phase infrastructure. The APC Smart-UPS VT SUVTP40KH4B4S provides 40kVA/32kW of true online three-phase protection at 400V. It carries the reliability of the Smart-UPS family, which has more than 10 million units installed worldwide.

Introducing the SUVTP40KH4B4S

The SUVTP40KH4B4S is a tower-format UPS built for small data centers, large retail stores, regional offices, and laboratories that need serious, centralized power protection. At 40kVA and 32kW of output, it supports substantial IT and facility loads from one unified system. Hardwired three-phase input and output connections suit a permanent, professional installation.

Three-Phase Input and Output Configuration of the SUVTP40KH4B4S

The unit is configured for three-phase input and output at 400V, so it integrates directly into commercial and industrial electrical infrastructure. Output connections include hardwired 4-wire and 5-wire options along with screw terminals, so electricians can configure the installation to site requirements.

Dual-Mains Input and Automatic Bypass on the SUVTP40KH4B4S

The SUVTP40KH4B4S has a dual-mains input with automatic bypass. It can draw from two separate utility feeds and switch to bypass automatically when needed. That improves system availability and reduces the risk that a single point of failure takes down protected equipment.

Scalable, Hot-Swappable Battery Runtime with the SUVTP40KH4B4S

Hot-swappable battery modules let you extend or maintain runtime without powering down the system. Typical backup is about 5 to 7 minutes at full load and about 18 to 22 minutes at half load. That is a meaningful window to transfer to generator power or run controlled shutdown procedures in a longer outage.

Remote Monitoring and Management of the SUVTP40KH4B4S

With APC’s Network Management Card, the unit supports remote monitoring and management through Web and SNMP, including temperature monitoring for fuller visibility into operating conditions. Data center and facility teams get real-time insight into power status across critical three-phase infrastructure.

Serviceability and Parallel Capability of the SUVTP40KH4B4S

User-replaceable batteries and an internal maintenance bypass keep long-term service simple, which reduces reliance on specialist technicians for routine battery maintenance. Parallel capability lets you combine multiple units for more capacity or redundancy, so there is a scalable path as needs grow.

Who Should Choose the SUVTP40KH4B4S

The SUVTP40KH4B4S suits small data centers, large retail operations, regional offices, and laboratories that need dependable, centralized three-phase protection at scale. It is especially valuable for organizations that want dual-mains resilience, remote manageability, and the option to expand capacity in parallel.

Final Thoughts on the SUVTP40KH4B4S

For organizations that have outgrown rack-level UPS protection, the APC Smart-UPS VT SUVTP40KH4B4S offers a centralized solution built on proven three-phase technology. Dual-mains input, automatic bypass, hot-swappable batteries, and robust remote monitoring deliver the enterprise-grade reliability that small data centers and critical facilities depend on. For businesses ready to invest in scalable three-phase protection, it is a strong, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT192BP: Ultimate Backup Protection

As UPS capacity grows to protect more equipment, so does the need for enough backup time. The APC Smart-UPS SRT192BP is a 192V external battery pack for compatible 5kVA and 6kVA Smart-UPS SRT extended-runtime models. It gives businesses more confidence when outages last longer than internal batteries can cover.

Introducing the SRT192BP

The SRT192BP is a sealed lead-acid external battery pack with a capacity of 1920 VAh. It connects to compatible Smart-UPS SRT online UPS units in the 5kVA and 6kVA range, such as the SRT5KXLI and SRT6KXLI. It extends backup power without changing the UPS. The pack ships with a documentation CD, an installation guide, and a warranty card.

Why Mid-to-High Capacity Systems Benefit from Extended Runtime

A 5kVA or 6kVA UPS usually protects important infrastructure, such as multiple servers, networking gear, or a moderately dense rack. When an outage lasts more than a few minutes, too little runtime can turn a manageable event into a costly one. The SRT192BP gives these systems battery reserve to match the importance of the load.

Purpose-Built Compatibility with 5kVA and 6kVA Smart-UPS SRT Units

The pack is made for 5kVA and 6kVA SRT extended-runtime models and keeps the reliability and power quality the series is known for. Check your UPS against APC’s compatibility list before ordering. The rack-mount equivalent is the SRT192RMBP, so confirm which form factor suits your installation.

Embedded Battery Monitoring in the SRT192BP

Embedded monitoring at the cell, module, and cabinet level provides data on battery runtime and health. That helps teams plan replacements before capacity drops. It supports a proactive maintenance approach instead of reacting to a failure.

Maintaining True Online Protection: The SRT192BP Advantage

Smart-UPS SRT units use true online double-conversion, which depends on having enough battery reserve to keep delivering clean power through an outage. The SRT192BP gives the UPS the capacity to sustain online protection for longer. That reduces dependence on a rushed generator transfer and the risk of an unplanned shutdown.

Battery Specifications and Handling of the SRT192BP

The pack uses sealed, spill-proof, maintenance-free lead-acid batteries with a typical life of 3 to 5 years. It measures about 683 x 432 x 130 mm and weighs about 91kg. It operates from 0 to 40°C. At that weight, plan for suitable lifting equipment and floor loading. The pack carries a 2-year warranty and meets RoHS and REACH requirements.

A Flexible, Scalable Power Protection Strategy with the SRT192BP

Rather than buy maximum internal capacity on day one, businesses can start with a compatible SRT unit and add the SRT192BP as their runtime needs become clearer. That keeps the first investment right-sized and leaves room to grow with real-world demand.

Supporting Business Continuity in Critical Environments: The SRT192BP

For businesses running important infrastructure on 5kVA or 6kVA UPS systems, in server rooms, small data centers, or critical office environments, extra runtime can separate an orderly response from a costly disruption. It is a practical safeguard for organizations that can’t afford unplanned downtime.

Who Should Choose the SRT192BP

The SRT192BP suits businesses and IT departments running, or planning to deploy, a compatible 5kVA or 6kVA Smart-UPS SRT extended-runtime model who want protection against longer interruptions. It is especially valuable where power reliability is less predictable, or where downtime carries significant cost.

Final Thoughts on the SRT192BP

Extended runtime is a key part of any serious power protection strategy. The APC Smart-UPS SRT192BP adds 1920 VAh of battery capacity to compatible 5kVA and 6kVA systems, with monitoring built in. For organizations that depend on dependable mid-to-high capacity UPS protection, it is a smart, worthwhile investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT192BP2: Ultimate Backup Protection

Larger UPS systems protect larger workloads, and larger workloads need longer backup time. The APC Smart-UPS SRT192BP2 is a 192V external battery pack for compatible 8kVA and 10kVA Smart-UPS SRT extended-runtime models. It gives businesses extra resilience when outages run long.

Introducing the SRT192BP2

The SRT192BP2 is a sealed lead-acid external battery pack with a capacity of 1920 VAh. It connects to compatible APC Smart-UPS SRT online UPS units in the 8kVA and 10kVA range, such as the SRT8KXLI and SRT10KXLI. Businesses can add backup power time without replacing the UPS. It ships with a documentation CD and an installation guide.

Why High-Capacity Systems Need Extended Runtime

An 8kVA or 10kVA UPS usually protects substantial infrastructure, such as multiple servers, storage arrays, and dense networking gear. When outages run past a few minutes, the cost of too little runtime grows with the size of the load. The SRT192BP2 gives the UPS enough battery reserve to match what it protects.

Seamless Compatibility with 8kVA and 10kVA Smart-UPS SRT Systems

The pack is made for 8kVA and 10kVA SRT extended-runtime models, so it keeps the power quality and reliability that define the series. Check your UPS against APC’s compatibility list before ordering. The rack-mount equivalent is the SRT192RMBP2, so confirm which form factor suits your installation.

Embedded Battery Monitoring in the SRT192BP2

The SRT192BP2 provides embedded monitoring at the cell, module, and cabinet level. That gives runtime and health data, which helps you plan replacement before capacity becomes a problem. APC also notes that the pack ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Sustaining True Online Protection: The SRT192BP2 Advantage

Smart-UPS SRT systems rely on true online double-conversion, which needs battery reserve to keep delivering clean power through an outage. The SRT192BP2 gives the UPS more reserve to sustain online protection, reducing the chance of a forced generator transfer or an unplanned shutdown before the outage resolves.

Battery Specifications and Handling of the SRT192BP2

The pack uses sealed, spill-proof, maintenance-free lead-acid batteries with a typical life of 3 to 5 years. It measures about 683 x 432 x 130 mm and weighs about 91kg, with a shipping weight near 101.5kg. At that weight, plan for suitable lifting equipment and floor loading. The pack carries a 2-year warranty and meets RoHS and REACH requirements.

A Scalable Approach to High-Capacity Protection

Rather than buy maximum capacity up front, businesses can start with a compatible SRT unit and add the SRT192BP2 as runtime needs become clearer. That keeps the first investment right-sized and leaves room to grow.

Critical for High-Density Environments: The SRT192BP2

In data centers, healthcare facilities, and other sites running dense infrastructure, extra runtime can mean the difference between an orderly response and a costly failure. When 8kVA to 10kVA of load represents core business infrastructure, more runtime is a meaningful safeguard.

Who Should Choose the SRT192BP2

The SRT192BP2 suits data centers, healthcare facilities, and enterprise IT environments already running, or planning to deploy, a compatible 8kVA or 10kVA SRT extended-runtime model. It is especially valuable in regions with longer outages and for sites with strict uptime requirements.

Final Thoughts on the SRT192BP2

For businesses running significant infrastructure on 8kVA or 10kVA Smart-UPS SRT systems, runtime is part of the protection plan. The APC Smart-UPS SRT192BP2 adds 1920 VAh of battery capacity with monitoring built in. For organizations serious about high-capacity protection, it is a smart, valuable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT96BP 96V Battery Pack for Ultimate Backup

Even a very reliable UPS is only as good as the runtime it can deliver in a long outage. The APC Smart-UPS SRT96BP is a 96V external battery pack that extends backup time on compatible 3kVA Smart-UPS SRT units. Businesses get extra time when an outage runs longer than expected.

Introducing the SRT96BP

The SRT96BP is a purpose-built external lead-acid battery pack for APC Smart-UPS SRT online UPS systems. It is compatible with 3kVA SRT extended-runtime models, such as the SRT3000XLI, and it supports mission-critical applications that need more runtime than internal batteries provide. Businesses connect it to their existing UPS and add backup time without changing the unit.

Why Extended Runtime Matters for Mission-Critical Systems

For servers, networking equipment, and other essential infrastructure, a short backup window isn’t always enough. Storms, grid problems, and infrastructure failures can outlast internal batteries. The SRT96BP adds battery capacity to bridge longer gaps in utility power. It is designed to help ensure continuous operation of critical systems.

Seamless Compatibility with Smart-UPS SRT Systems

The SRT96BP is made to work with compatible Smart-UPS SRT units. Extending runtime doesn’t mean compromising power quality or compatibility. The pack is intended for extended-runtime (“XL”) 3kVA models, so check your UPS model against APC’s compatibility list before ordering.

Hot-Swappable, Monitored Batteries in the SRT96BP

The pack’s batteries are hot-swappable and user-replaceable, so servicing doesn’t require powering down protected equipment. Embedded monitoring at the cell, module, and cabinet level provides data on battery runtime and health. That helps teams plan replacement before capacity becomes a problem.

Supporting True Online Protection: The SRT96BP Advantage

Smart-UPS SRT systems use true online double-conversion technology, which means clean power depends on enough battery reserve. The SRT96BP gives the UPS the capacity to sustain online protection longer. That avoids a rushed generator handover or an unplanned shutdown before the outage resolves.

Battery Specifications and Installation Notes for the SRT96BP

The pack uses sealed, leak-proof, maintenance-free lead-acid batteries, with a typical life of 3 to 5 years. It measures about 594 x 432 x 85mm and weighs about 40.6kg. It mounts in a rack using a kit, and the battery can be mounted in virtually any position. At that weight, plan for safe handling during installation. The pack ships with a documentation CD, user manual, and warranty card, and it carries a 2-year warranty.

Scalable Power Protection Strategy with the SRT96BP

Rather than buying maximum internal capacity up front, businesses can start with a compatible SRT unit and add the SRT96BP as their runtime needs become clearer. That lets them right-size the first investment and keep the option to expand later. In cost per watt-hour, a battery pack is an inexpensive way to extend backup time.

Who Should Choose the SRT96BP

The SRT96BP suits businesses that already run, or plan to deploy, a compatible 3kVA Smart-UPS SRT extended-runtime model and want more runtime. It is especially valuable for data centers, server rooms, and critical infrastructure in areas prone to longer or less predictable outages.

Final Thoughts on the SRT96BP

Runtime flexibility is central to any serious power protection plan. The APC Smart-UPS SRT96BP extends backup capacity for compatible 3kVA systems, with hot-swappable, monitored batteries and a 1-year warranty. For organizations that are serious about mission-critical uptime, it is a smart, practical investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC NetShelter AR3100: Ultimate Rack Protection

Power protection is only half of a well-built IT environment. The physical enclosure that houses your equipment matters just as much. The APC NetShelter SX AR3100 is a 42U server rack enclosure built for organized, secure, and well-ventilated deployment of servers, switches, and networking hardware in low to medium density data center applications.

Introducing the AR3100

The AR3100 is a NetShelter SX enclosure measuring 600mm wide, 1070mm deep, and 1991mm tall, with a full 42U of usable rack space. It is a standard enclosure for low to medium density server and networking applications. IT teams get a dependable, professional-grade home for consolidating equipment in one organized, secure structure.

Compact Footprint, Full Capacity: The AR3100 Advantage

A 600mm width on a 42U frame makes good use of floor space while housing a large volume of equipment. The enclosure is also designed to fit through standard doorways, which is a practical benefit for facilities that need to move racks without structural changes.

Build Quality and Load Capacity of the AR3100

The AR3100 supports a dynamic load of 1023 kg and a static load of 1364 kg. That is enough for dense configurations of servers, switches, and heavy networking equipment without compromising stability. Its construction suits demanding data center environments.

Ventilation and Cooling Support in the AR3100

Heat management is critical for equipment reliability. The AR3100 is designed with ventilated doors and scalable cooling options to support airflow through the enclosure. Good airflow helps prevent heat buildup around densely packed equipment, which supports stable operation and longer hardware life.

Tool-Less Mounting and Practical Design Features of the AR3100

Tool-less mounting speeds installation of equipment. Vertical mounting rails with square holes fit standard rack-mount gear broadly. The enclosure supports 600mm floor tile spacing, which matches common raised-floor layouts, and it includes UBC Zone 4 stabilization provisions for added security in seismically active regions.

Security Features of the AR3100

Lockable doors and side panels protect housed equipment from unauthorized access. In data centers and server rooms, that physical security matters as much as network security.

Who Should Choose the AR3100

The AR3100 suits data centers, server rooms, and IT departments that need a reliable, secure enclosure for low to medium density deployments. It is especially valuable for organizations that want strong load capacity, effective cooling support, and physical security in a space-efficient footprint.

Final Thoughts on the AR3100

A dependable IT environment starts with a solid physical foundation. The APC NetShelter SX AR3100 delivers with strong load capacity, ventilated cooling design, tool-less mounting, and lockable security. For organizations that want a secure, well-organized, cooling-conscious rack, the AR3100 is a practical, dependable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT2200KLI: Ultimate Power Protection

When power quality and uptime are non-negotiable, you need a UPS that goes beyond basic backup. The APC Smart-UPS SRT2200XLI provides 2200VA/1980W of true double-conversion online protection at 230V. It is built for the harshest power conditions, and it supports scalable runtime for hours of backup, not just minutes.

Introducing the SRT2200XLI

The SRT2200XLI is part of APC’s Smart-UPS SRT family, which provides high-density, true double-conversion online power protection for servers, voice and data networks, medical labs, and light industrial applications. At 2200VA, it suits small to mid-sized server rooms and business environments that need consistently clean power. It ships as a tower, and a rack-mount kit is sold separately.

Online Double-Conversion Technology in the SRT2200XLI

The SRT2200XLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. The output is a clean sine wave with zero transfer time, so sensitive equipment sees no interruption even when the grid is unstable. It protects against sags, surges, harmonic distortion, and frequency variation.

Outlets and Connectivity on the SRT2200XLI

The unit offers eight IEC C13 outlets and two IEC C19 outlets, plus two IEC jumper cables. That is plenty of connections for servers, switches, and higher-draw devices. A SmartSlot accepts an optional Network Management Card, and RS-232 and USB ports are included. A 2.44 m cord supplies input power, and PowerChute software is included for unattended graceful shutdown of network operating systems.

Scalable Runtime of the SRT2200XLI

The “XL” in the part number means extended-runtime capability. The unit’s internal battery gives about 4 minutes at full load for a safe shutdown or generator handover. For longer outages, matching external battery packs extend runtime to hours, so you can scale backup duration to your outage exposure without replacing the UPS. The battery recharges in about 3 hours.

Built for High-Availability Environments: The SRT2200XLI Advantage

Virtualized servers, storage systems, and critical networking gear depend on stable power. The SRT2200XLI delivers consistent, high-quality power conditioning that line-interactive units can’t match. A wide input range keeps it on mains through voltage swings, and the unit tolerates ambient temperatures from 0 to 40°C and altitudes to 10,000 feet.

Monitoring and Manageability with the SRT2200XLI

With the optional Network Management Card, IT teams get remote monitoring of power status, battery health, and load. That helps catch issues early in data rooms and unattended sites, before they become downtime. The unit carries CE, EAC, RCM, and VDE certifications.

Warranty on the SRT2200XLI

Listings show a 2-year warranty on the UPS, with extended service options available. Check the terms that apply in your market.

Who Should Choose the SRT2200XLI

The SRT2200XLI suits businesses running mission-critical servers, virtualization hosts, or sensitive networking equipment that can’t tolerate power quality problems. It is especially valuable for finance, healthcare, and data services, where uptime and power integrity are tied to business results.

Final Thoughts on the SRT2200XLI

When a power interruption is too costly to risk, the APC Smart-UPS SRT2200XLI delivers the online double-conversion protection that mission-critical environments need. Superior power quality, scalable runtime, and flexible connectivity make it a serious investment in resilience. For businesses that demand the highest level of protection at this capacity, it is a smart, dependable choice.

CONTACT US @ TIACO TECHNOLOGIES.