Powerful APC SRT6KXLI: Ultimate Power Protection

Businesses that run dense server or networking loads need continuous, regulated power that holds up even in unstable grid conditions. The APC Smart-UPS SRT6KXLI provides 6kVA/6kW of true double-conversion online protection at 230V. It is an extended-runtime model for places where power quality and uptime really matter.

Introducing the SRT6KXLI

The SRT6KXLI is part of APC’s Smart-UPS SRT series, which delivers high-density, true double-conversion online power protection in a pure sine wave tower. It suits servers, storage, voice and data networks, and other critical equipment in server rooms and small data centers. It provides ten outlets (six IEC C13 and four IEC C19), two IEC jumper cables, a SmartSlot, and a Network Management Card.

Double-Conversion Technology in the SRT6KXLI

The SRT6KXLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. Output is a clean sine wave with only 3% total harmonic distortion and zero transfer time. Equipment is isolated from grid instability at all times, not only in a full outage. A wide input range, 100V to 275V, keeps the unit off battery through serious voltage swings.

Power Quality and Efficiency of the SRT6KXLI

Double-conversion efficiency is about 94.4%, which keeps energy costs down for an online UPS. Green mode bypasses unused electrical components in good power conditions to reach very high efficiency without giving up protection. Input power factor correction reduces installation cost by allowing smaller generators and cabling.

Scalable Runtime of the SRT6KXLI

The built-in 192V battery gives about 2.5 minutes at full load and about 8.7 minutes at half load. That covers a controlled shutdown or a generator handover. When business-critical systems need runtime in hours, you can add up to 10 external battery packs, which scales backup duration to your outage risk without replacing the UPS. The battery recharges in about 1.5 hours.

Hot-Swappable, Intelligently Managed Batteries in the SRT6KXLI

The batteries are hot-swappable and user-replaceable, using APCRBC140 cartridges, and they typically last 3 to 5 years. Temperature-compensated charging and intelligent battery management maximize battery performance and life. Battery failure notification provides early-warning analysis, so replacement happens on your schedule.

Reliability Features of the SRT6KXLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, a temperature probe, and audible alarms add control and warning. Surge protection is rated at 480 joules.

Remote Monitoring and Manageability of the SRT6KXLI

The included Network Management Card enables remote monitoring and management of power status, battery health, and load. USB, RS-232, and contact-closure interfaces provide local connections. Teams can spot developing issues early, before they become downtime.

Installation Notes for the SRT6KXLI

The unit uses a hardwired input, so a qualified electrician should install it. It is a heavy tower, and a 55 dB noise level suits a server room better than an open office. A 3-year warranty covers the unit.

Who Should Choose the SRT6KXLI

The SRT6KXLI suits businesses running dense server racks, virtualization hosts, or other equipment sensitive to power quality. It is especially valuable in finance, healthcare, and data services, where consistent uptime and clean power drive business results.

Final Thoughts on the SRT6KXLI

When protecting high-density, business-critical equipment, compromise isn’t an option. The APC Smart-UPS SRT6KXLI delivers premium double-conversion protection with 94.4% efficiency, scalable runtime, and strong remote management. For businesses that need uncompromising power protection at 6kVA, it is a dependable, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT6KXLI 6000VA: Ultimate Protection

Businesses that run dense server or networking loads need continuous, regulated power that holds up even in unstable grid conditions. The APC Smart-UPS SRT6KXLI provides 6kVA/6kW of true double-conversion online protection at 230V. It is an extended-runtime model for places where power quality and uptime really matter.

Introducing the SRT6KXLI

The SRT6KXLI is part of APC’s Smart-UPS SRT series, which delivers high-density, true double-conversion online power protection in a pure sine wave tower. It suits servers, storage, voice and data networks, and other critical equipment in server rooms and small data centers. It provides ten outlets (six IEC C13 and four IEC C19), two IEC jumper cables, a SmartSlot, and a Network Management Card.

Double-Conversion Technology in the SRT6KXLI

The SRT6KXLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. Output is a clean sine wave with only 3% total harmonic distortion and zero transfer time. Equipment is isolated from grid instability at all times, not only in a full outage. A wide input range, 100V to 275V, keeps the unit off battery through serious voltage swings.

Power Quality and Efficiency of the SRT6KXLI

Double-conversion efficiency is about 94.4%, which keeps energy costs down for an online UPS. Green mode bypasses unused electrical components in good power conditions to reach very high efficiency without losing protection. Input power factor correction reduces installation cost by allowing smaller generators and cabling.

Scalable Runtime of the SRT6KXLI

The built-in 192V battery gives about 2.5 minutes at full load and about 8.7 minutes at half load. That covers a controlled shutdown or a generator handover. When business-critical systems need runtime in hours, you can add up to 10 external battery packs, which scales backup duration to your outage risk without replacing the UPS. The battery recharges in about 1.5 hours.

Hot-Swappable, Intelligently Managed Batteries in the SRT6KXLI

The batteries are hot-swappable and user-replaceable, using APCRBC140 cartridges, and they typically last 3 to 5 years. Temperature-compensated charging and intelligent battery management maximize battery performance and life. Battery failure notification provides early-warning analysis, so replacement happens on your schedule.

Reliability Features of the SRT6KXLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, a temperature probe, and audible alarms add control and warning. Surge protection is rated at 480 joules.

Remote Monitoring and Manageability of the SRT6KXLI

The included Network Management Card enables remote monitoring and management of power status, battery health, and load. USB, RS-232, and contact-closure interfaces provide local connections. Teams can spot developing issues early, before they become downtime.

Installation Notes for the SRT6KXLI

The unit uses a hardwired input, so a qualified electrician should install it. It is a heavy tower, and a 55 dB noise level suits a server room better than an open office. A 3-year warranty covers the unit.

Who Should Choose the SRT6KXLI

The SRT6KXLI suits businesses running dense server racks, virtualization hosts, or other equipment sensitive to power quality. It is especially valuable in finance, healthcare, and data services, where consistent uptime and clean power drive business results.

Final Thoughts on the SRT6KXLI

When protecting high-density, business-critical equipment, compromise isn’t an option. The APC Smart-UPS SRT6KXLI delivers premium double-conversion protection with 94.4% efficiency, scalable runtime, and strong remote management. For businesses that need uncompromising power protection at 6kVA, it is a dependable, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

APC Smart-UPS SRT 6000VA 230V (SRT6KXLI)

In an era where IT infrastructure powers everything from enterprise servers to medical labs, power reliability is non-negotiable. The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) from Schneider Electric stands as a robust double-conversion online UPS, delivering 6kVA/6kW of pure sine wave power with zero transfer time to shield sensitive equipment from outages, surges, and fluctuations. This tower-mountable unit, compatible with rack setups via optional kits, supports extended runtime through up to 10 external battery packs, making it ideal for servers, storage, voice/data networks, and light industrial applications. As a current model with energy-efficient design and embedded network management, the SRT6KXLI ensures seamless integration into modern EcoStruxure ecosystems. This blog unpacks its specs, features, performance, and more to help IT pros evaluate its fit for high-stakes environments.

Key Specifications at a Glance

The SRT6KXLI combines high power density with global compatibility for 230V setups. Here’s a detailed overview:

SpecificationDetails
Output Power Capacity6000 Watts / 6000 VA
Nominal Output Voltage230V (configurable: 220V, 240V)
Output Connections6x IEC 60320 C13, 2x IEC Jumpers, 4x IEC 60320 C19
Nominal Input Voltage230V
Input ConnectionsHard Wire 3-wire (H + N + E)
Input Voltage Range100–275V adjustable (half load)
Output WaveformPure Sine Wave (double-conversion online)
EfficiencyUp to 94.6% (online mode); 98% (Green Mode)
Battery TypeSealed Lead-Acid (VRLA), maintenance-free
Battery Voltage192V
Typical Recharge Time1.5 hours
Runtime (Internal Batteries)~2.5 min at full load (6000W); ~5 min at 4000W; ~8 min at 3000W; ~15 min at 2000W; ~34 min at 1000W
Scalable RuntimeUp to 10x SRT192BP external packs
Surge Energy Rating480 Joules
Dimensions (H x W x D)432 x 174 x 719 mm
Weight60 kg
ConnectivityEmbedded Network Management Card, SmartSlot, USB, RS-232
Noise Level<55 dBA
CertificationsCE, IEC 62040-1/2, EU RoHS, REACH
Warranty2 years (UPS)

These specs highlight its suitability for demanding loads, with eco-friendly packaging using at least 70% recycled cardboard.

Design and Build: Compact and Versatile

The SRT6KXLI’s slim tower form factor (just 174mm wide) fits neatly under desks or in tight server closets, while optional rail kits (SRTRK2/SRTRK3) enable 3U rack mounting for data center flexibility. Its rugged steel enclosure weighs 60kg, balancing portability with durability for 24/7 operations. The front-facing LCD provides intuitive status monitoring—load, battery health, and alerts—at a glance, while rear hard-wire input and diverse IEC outlets accommodate mixed equipment.

Hot-swappable batteries and user-replaceable internals minimize downtime, and the grounded design ensures safety in humid or dusty environments. With a black powder-coated finish and integrated handles, it’s as practical as it is professional, supporting cold starts from battery alone during total blackouts.

Standout Features That Drive Reliability

Engineered for zero-compromise protection, the SRT6KXLI packs advanced capabilities:

  • Double-Conversion Online Topology: Continuously regenerates AC power for <2% distortion, isolating loads from grid noise with 0ms transfer—perfect for PFC power supplies.
  • Scalable Extended Runtime: Internal batteries handle short outages; add up to 10 SRT192BP packs for hours of support, with automatic detection and load sharing.
  • High-Efficiency Green Mode: Bypasses conversion during stable input for 98% efficiency, cutting energy costs while maintaining full protection.
  • Embedded Network Management: Pre-installed card enables SNMP, web access, and email alerts; SmartSlot accepts add-ons like environmental sensors for EcoStruxure IT integration.
  • Advanced Surge and Filtering: 480J rating plus EMI/RFI suppression defends against spikes, with temperature-compensated charging extending battery life to 3–5 years.
  • User-Centric Tools: PowerChute software automates shutdowns, and the EPO button adds safety.

These features position it as a proactive asset for IT continuity.

Performance in Action

In real-world benchmarks, the SRT6KXLI delivers on its promises: full 6000W loads sustain ~2.5 minutes for safe shutdowns, scaling to 34 minutes at lighter 1000W draws. With one external pack, expect 5–10x gains, bridging to generators effectively. Efficiency peaks at 94.6% under 75% load in online mode, dropping power draw significantly in Green Mode.

Users praise its handling of unstable grids (100–275V range) in regions like the Middle East and Asia, with the LCD and network card enabling remote diagnostics that prevent issues. Recharge is swift at 1.5 hours, and noise stays under 55 dBA, blending into server rooms. Overall, it supports 99.999% uptime in tested deployments.

Ideal Applications: Empowering Diverse Critical Loads

The SRT6KXLI excels in power-sensitive scenarios:

  • Data Centers and Servers: Powers racks with clean, scalable backup.
  • Voice/Data Networks: Keeps switches and VoIP online during dips.
  • Medical Labs: Protects diagnostic tools from interruptions.
  • Light Industrial: Shields controls and automation in volatile areas.
  • Enterprise Storage: Ensures data integrity for NAS/SAN setups.

For 6kVA needs demanding online purity, it’s a top contender.

Pros and Cons: A Balanced Review

Pros:

  • Zero-transfer double-conversion for ultimate reliability.
  • Scalable runtime up to hours with external packs.
  • 98% Green Mode efficiency slashes operating costs.
  • Embedded networking for easy remote management.
  • Compact 60kg design with 3-year warranty.

Cons:

  • Short internal runtime (~2.5 min full load) requires expansions for long outages.
  • 60kg weight may need two-person install.
  • Higher upfront cost for premium online topology.
  • Rail kit sold separately for rack use.

The pros make it a strong investment for pros prioritizing protection.

Final Thoughts: A Powerhouse for Unwavering Continuity

The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) redefines online UPS performance with its efficient, scalable design and intelligent monitoring, safeguarding critical IT against today’s power threats. Whether extending runtime in a data center or stabilizing a lab network, it delivers peace of mind and cost savings. As a current offering with robust support, it’s primed for future-proofing your infrastructure. CONTACT US @ TIACO TECHNOLOGIES for quotes or bundles.

What’s your experience with high-capacity UPS? Share in the comments!

APC Smart-UPS SRT 6000VA 230V (SRT6KXLI)

In a world where digital operations hinge on constant power availability, even brief interruptions can lead to substantial losses in productivity and data integrity. The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI), crafted by Schneider Electric’s APC division, emerges as a premier solution for safeguarding mission-critical IT infrastructure. This double-conversion online UPS delivers 6kVA/6kW of pure sine wave power at 230V, ensuring zero transfer time to battery during outages—perfect for servers, storage arrays, and sensitive networks. With its rack/tower versatility and integrated network management, it’s tailored for environments demanding unwavering reliability without excessive footprint. Join us as we unpack its capabilities, specs, and real-world impact.

Overview: Seamless Protection for Demanding Environments

At the heart of the SRT6KXLI is its double-conversion topology, which continuously regenerates clean AC power from incoming utility feed, filtering out surges, noise, and harmonics that plague sensitive electronics. Rated for 230V single-phase operation, it supports a broad input range to handle global voltage fluctuations, making it adaptable for international deployments. Pre-configured with an AP9631 network management card, it enables proactive monitoring and control via APC’s PowerChute software, while the multifunction LCD provides intuitive local oversight. This model is especially suited for space-constrained setups, thanks to its convertible form factor and extended runtime options.

Key Features That Ensure Uptime

The SRT6KXLI packs enterprise-grade functionality into a compact design, prioritizing efficiency and ease:

  • Pure Sine Wave Output: Delivers less than 2% voltage distortion for optimal performance with active PFC power supplies.
  • Zero Transfer Time: Instantaneous switch to battery, eliminating disruptions for critical loads.
  • Extended Runtime Capability: Supports up to 10 external SRT192BP battery packs for scalable backup, from minutes to hours.
  • Integrated Network Management: Includes Ethernet, USB, serial ports, and a SmartSlot for advanced accessories like environmental sensors.
  • User-Friendly Interface: Bright LCD with audible/visible alarms, plus EPO (Emergency Power Off) for safety.
  • Energy Optimization: High-efficiency operation reduces heat and costs, with internal bypass for maintenance without downtime.

These features make it a robust choice for IT managers seeking simplicity alongside superior protection.

Technical Specifications at a Glance

Here’s a curated table of the SRT6KXLI’s essential specs, drawn from official documentation for quick reference.

CategorySpecification
Power Rating6000 VA / 6000 W
Input Voltage230V nominal (100-275V adjustable range); 40-70 Hz frequency
Output Voltage230V (configurable for 220V/240V); pure sine wave
Output Frequency50/60 Hz ±3 Hz (sync to mains)
EfficiencyUp to 94% (typical at full load; view graphs for details)
BatterySealed lead-acid (192V nominal); APCRBC140 cartridge; 3-5 year life; 1.5-hour recharge
Runtime~2.5 minutes at full load (6000W); scalable with external packs
ConnectorsInput: Hard wire 3-wire (1P + N + E); Output: 6x IEC C13, 4x IEC C19, 2x IEC Jumpers
Dimensions (HxWxD)432 mm x 174 mm x 719 mm (rack/tower)
Weight60 kg (net); 67 kg (shipping)
Audible Noise55 dBA at 1 meter
Operating Temp0-40°C; 0-95% humidity (non-condensing)

This setup ensures compatibility with diverse loads, from rack-mounted servers to standalone workstations.

Scalability and Maintenance: Future-Proof Reliability

Scalability defines the SRT6KXLI’s longevity. Start with the internal battery for basic runtime, then daisy-chain up to 10 external packs via a dedicated port for prolonged autonomy during extended outages—ideal for data centers or remote sites. Its rack/tower design (with optional rail kits like SRTRK2) fits evolving infrastructures seamlessly.

Maintenance is streamlined: Hot-swappable batteries and an internal bypass allow servicing without load interruption. The 2-year warranty includes repair/replace options, and APC’s lifecycle services cover assembly and power-up for worry-free deployment. Built to IP20 standards, it withstands typical IT environments while minimizing thermal output at 1300 BTU/hr.

Benefits and Real-World Use Cases

Beyond raw power, the SRT6KXLI offers compelling ROI through reduced energy use, lower TCO, and enhanced security against power anomalies. Its surge protection (480 Joules) and conformal coatings guard against dust and humidity, extending equipment life.

It excels in:

  • IT and Data Storage: Powers mid-sized server rooms, preventing crashes during blackouts.
  • Medical and Lab Settings: Ensures uninterrupted operation for diagnostic tools and research rigs.
  • Voice/Data Networks: Maintains VoIP and telecom uptime in branch offices.
  • Light Industrial Controls: Supports automation panels in manufacturing.

For example, a European telecom firm reported seamless failover during a 45-minute grid failure, crediting the SRT series for zero packet loss.

Wrapping Up: The Backbone of Uninterrupted Operations

The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) stands as a testament to intelligent power protection—compact, scalable, and relentlessly reliable. Whether fortifying your edge computing or core IT, it delivers the clean power your systems crave. For those prioritizing zero-downtime resilience, this UPS is a strategic essential. CONTACT US @ TIACO TECHNOLOGIES for Pricing and Availability.

APC Smart-UPS SRT 6000VA Double Conversion 230V (SRT6KXLI)

In the realm of IT infrastructure, where even momentary power fluctuations can lead to data loss or system crashes, a reliable uninterruptible power supply (UPS) is indispensable. The APC Smart-UPS SRT 6000VA Double Conversion 230V, model SRT6KXLI, from APC by Schneider Electric, stands out as a high-density, online double-conversion solution tailored for demanding environments like data centers, medical labs, voice and data networks, and light industrial applications. Capable of delivering 6kVA/6kW in a compact tower form, this UPS ensures precise power delivery and scalable runtime, making it a cornerstone for mission-critical operations. In this blog, we’ll explore its capabilities, features, and why it’s a strategic choice for safeguarding your assets.

What is the APC Smart-UPS SRT6KXLI?

The SRT6KXLI is a 6000VA (6000W) tower UPS featuring online double-conversion topology, which continuously converts incoming AC power to DC and back to AC for ultra-clean output. Designed for 230V single-phase systems, it supports extended runtime through internal batteries and optional external packs, ideal for protecting power-hungry equipment like blade servers or densely loaded racks. It includes a built-in network management card and SmartSlot for advanced monitoring. This model excels in challenging power conditions, offering a wide input voltage window and input power factor correction (PFC) for efficient, stable performance.

Key Features That Ensure Reliability

The SRT6KXLI is engineered for enterprise-level uptime, blending robust hardware with intelligent software. Here’s what makes it exceptional:

  • Online Double-Conversion Protection: Provides zero transfer time to battery and regulates output voltage to less than 5% distortion, shielding sensitive equipment from surges, sags, and noise.
  • Scalable Runtime: Internal sealed lead-acid batteries offer 5–7 minutes at full load, with hot-swappable external packs (like SRT192BP) for hours of extension—perfect for graceful shutdowns or prolonged outages.
  • Wide Input Voltage Range: Operates from 100–280V, reducing battery usage in unstable grids and extending battery life.
  • Internal Bypass and Frequency Stability: Automatic bypass during overloads or maintenance, plus output frequency syncing to mains (47–53 Hz for 50 Hz nominal), ensuring compatibility with generators.
  • Advanced Management: Includes a web/SNMP card for remote monitoring, LCD graphical display for real-time status, and integration with APC’s PowerChute software for automated shutdowns and alerts.
  • Eco-Mode Efficiency: Up to 98% efficiency in eco-mode, cutting energy costs while maintaining protection.

These features deliver >99.999% availability, making the SRT6KXLI suitable for environments where downtime equates to significant losses.

Technical Specifications at a Glance

Based on official APC documentation, here’s a table summarizing the SRT6KXLI’s core specifications:

SpecificationDetails
Capacity6000VA / 6000W
TopologyOnline Double-Conversion
Input Voltage230V Single-Phase (100–280V range)
Output Voltage230V (configurable 220/230/240V)
EfficiencyUp to 95% online, 98% eco-mode
Output Frequency47–53 Hz (50 Hz nominal), 57–63 Hz (60 Hz)
WaveformPure Sine Wave
Battery TypeSealed Lead-Acid (VRLA), Maintenance-Free
Typical Runtime (Full Load)5–7 minutes (scalable with external packs)
Recharge Time3 hours to 90%
Outlets6x IEC C13 + 4x IEC C19
Form FactorTower (rack-mountable with optional kit)
Dimensions (H x W x D)17.0 x 17.5 x 24.0 inches (432 x 444 x 610 mm)
WeightApproximately 145 lbs (66 kg)
Operating Temperature32°F to 104°F (0°C to 40°C)
InterfacesNetwork Card, SmartSlot, USB, RS-232, LCD
Warranty2 years

This compact design fits seamlessly into server rooms or under desks, balancing power with space efficiency.

Compatibility: Versatile Integration for IT Ecosystems

The SRT6KXLI is optimized for single-phase 230V setups and pairs effortlessly with APC’s accessory ecosystem, including external battery enclosures (e.g., SRT192BP for 5kVA/6kVA models) and rail kits for rack conversion. It’s compatible with a wide range of IT equipment, from blade servers to networking gear, and supports daisy-chaining multiple packs for custom runtimes. For management, it integrates with EcoStruxure IT and PowerChute for centralized oversight. Note: It’s tailored for 50/60 Hz regions—verify your electrical setup, and update firmware via APC’s portal for peak compatibility.

Installation and Maintenance: Effortless and User-Friendly

APC simplifies deployment with included documentation, software CD, USB cable, and temperature probe. High-level steps include:

  1. Site Prep: Position in a ventilated area; at 145 lbs, use a team or dolly for handling.
  2. Connection: Plug into a 230V outlet and connect loads to the C13/C19 outlets. Link the network card for remote access.
  3. Setup and Test: Power on, configure via LCD or web interface, and run a self-test to calibrate runtime.

Maintenance is a breeze: Hot-swappable batteries (RBC55 replacement) allow swaps without downtime, and the LCD provides predictive alerts. Annual inspections via software ensure longevity—expect 3–5 years from batteries under normal conditions. For extended runtime, add packs and recalibrate using APC’s online tools.

Why Choose the SRT6KXLI? Benefits and Considerations

This UPS shines in high-density scenarios, offering scalable protection that grows with your needs while minimizing energy waste. Users praise its stable output during brownouts and easy remote management, with one report noting seamless integration in a medical lab setup. Its double-conversion design prevents even millisecond disruptions, potentially saving thousands in data recovery costs.

Considerations: While efficient, it generates some heat—maintain below 77°F for optimal battery life. It’s single-phase only, so not for three-phase loads, and external packs add cost for ultra-long backups. For greener options, APC’s lithium upgrades are available but pricier.

Conclusion: Empower Your Infrastructure with Precision

The APC Smart-UPS SRT 6000VA Double Conversion 230V (SRT6KXLI) is a reliable, high-performance guardian for your critical systems, combining dense power delivery with smart scalability. For IT managers and facility pros, it’s an investment in uninterrupted operations. CONTACT US @ TIACO TECHNOLOGIES for current pricing and bundles.

Deployed the SRT6KXLI? Share your runtime tweaks or real-world wins in the comments!

Power Protection Perfected: A Deep Dive into the APC 6000VA Double Conversion Smart-UPS SRT 230V (SRT6KXLI)

In an era where data centers, servers, and critical IT infrastructure power the backbone of businesses worldwide, reliable power protection isn’t just a nice-to-have—it’s essential. Power outages, surges, and fluctuations can lead to costly downtime, data loss, and hardware damage. Enter the APC Smart-UPS SRT 6000VA Double Conversion model (SRT6KXLI), a robust uninterruptible power supply (UPS) designed for demanding environments. Manufactured by APC by Schneider Electric, this 230V tower/rack-mountable unit delivers high-density, online double-conversion power protection with scalable runtime capabilities. In this informative blog, we’ll explore its features, specifications, benefits, and real-world applications to help you decide if it’s the right fit for your setup.

What is Double Conversion Technology and Why Does It Matter?

At its core, the SRT6KXLI employs double conversion online technology, which sets it apart from basic standby or line-interactive UPS systems. In traditional UPS units, power flows directly from the mains to your equipment until an outage occurs, at which point batteries kick in—often with a brief transfer time that can disrupt sensitive loads. Double conversion, however, continuously converts incoming AC power to DC (via a rectifier) and then back to AC (via an inverter), providing a constant, clean sine wave output isolated from all input disturbances.

This zero-transfer-time design ensures:

  • Complete isolation from mains noise, spikes, and harmonics.
  • Pure sine wave output for compatibility with power-sensitive devices like servers, medical equipment, and network gear.
  • Frequency stability even during generator startups or brownouts.

For businesses in regions with unstable power grids—like parts of Europe, Asia, or emerging markets—the SRT6KXLI’s wide input voltage range (100-275V) and frequency tolerance (40-70Hz) make it a resilient choice, supporting loads up to 6000VA/6000W with a unity power factor (VA = W) for maximum efficiency.

Key Specifications: Under the Hood

The SRT6KXLI is engineered for scalability and performance. Here’s a breakdown of its core specs in a handy table for easy reference:

CategorySpecification Details
Capacity6000VA / 6000W (Unity Power Factor)
TopologyDouble Conversion Online
InputHardwired (3-wire); Nominal 230V (220/240V adjustable); Range: 100-275V; Frequency: 40-70Hz
Output(6) IEC 60320 C13 outlets (Battery Backup + Surge Protection)
(2) IEC Jumpers (Battery Backup)
(4) IEC 60320 C19 outlets (Battery Backup)
Pure Sine Wave; Crest Factor: 3:1; Efficiency: Up to 94.4%
Runtime5 minutes at full load (100%)
12 minutes at half load (50%)
Extended runtime with up to 10 external SRT192BP battery packs
BatterySealed Lead-Acid; User-replaceable (APCRBC140 cartridge); Hot-swappable; Automatic self-test
Form Factor4U Tower (Rack/Tower convertible; rail kit sold separately)
ConnectivityNetwork Management Card (AP9630) included for SNMP/Web monitoring
USB, Serial (RJ-45), SmartSlot for additional cards
Emergency Power Off (EPO) contact
EnvironmentalOperating Temp: 0-40°C; Humidity: 0-95% non-condensing
Noise Level: 55 dBA at 1m; Thermal Dissipation: 1300 BTU/hr
Protection Class: IP 20
Dimensions & WeightHeight: 173mm; Width: 432mm; Depth: 660mm; Weight: ~103kg
Warranty2 years
CertificationsRoHS, REACH, CE, EN/IEC 62040-1 & 2, EAC, IRAM, RCM, VDE

These specs highlight the unit’s robustness for mission-critical applications, with input power factor correction (PFC) ensuring efficient use of electricity and compatibility with generators.

Standout Features: What Makes the SRT6KXLI Shine

The SRT6KXLI isn’t just about raw power—it’s packed with intelligent features for proactive management:

  1. Scalable Runtime: Start with the internal batteries for short outages, then daisy-chain up to 10 external battery modules (SRT192BP) for hours of extended backup. This modularity is ideal for growing IT setups without overhauling your UPS.
  2. Advanced Monitoring and Management: The included Network Management Card enables remote monitoring via SNMP, web interface, or email alerts. Track metrics like load, runtime, and temperature in real-time. The LCD display provides intuitive status updates, including mimic diagrams for quick diagnostics.
  3. User-Friendly Design: Hot-swappable batteries mean no downtime for replacements. Features like automatic restart, cold start capability, and audible alarms keep you informed. Plus, the adjustable output voltage (220/230/240V) adapts to regional needs.
  4. Efficiency and Reliability: With 94.4% efficiency in online mode, it minimizes energy waste and heat. Internal bypass allows maintenance without interrupting power, and generator compatibility ensures seamless operation during prolonged outages.
  5. Versatile Installation: The 4U form factor supports both tower and rack mounting (rail kit optional), fitting seamlessly into data closets or server rooms. It’s also suited for light industrial, voice/data networks, medical labs, and edge computing environments.

Additional perks include surge protection, frequency conversion, and load shedding to prioritize critical devices during extended runtimes.

Benefits: Why Choose the SRT6KXLI for Your Infrastructure?

Investing in the SRT6KXLI translates to tangible advantages:

  • Minimized Downtime: Zero transfer time and pure power delivery protect against even the briefest interruptions, safeguarding data integrity for servers and VoIP systems.
  • Cost Savings: High efficiency reduces electricity bills, while scalable batteries avoid frequent upgrades. The 3-year warranty provides peace of mind.
  • Enhanced Security: Remote management prevents surprises, with predictive failure notifications via the intelligent battery system.
  • Eco-Friendly: RoHS compliance and low thermal output make it suitable for green data centers.

In benchmarks, similar SRT series models deliver reliable performance under stress, with users noting its ability to handle heavy loads without overheating.

Ideal Use Cases: Where the SRT6KXLI Excels

This UPS is tailored for environments requiring unwavering power:

  • Data Centers and Servers: Supports high-density racks with clean power for multiple servers.
  • Healthcare and Labs: Ensures uninterrupted operation for medical devices and diagnostic equipment.
  • Telecom and Networks: Protects voice/data systems from fluctuations in remote or industrial sites.
  • Edge Computing: Ideal for distributed setups where space and reliability are at a premium.

If your setup involves sensitive electronics drawing up to 6kW, this model’s isolation and scalability shine.

Conclusion: A Smart Investment in Power Reliability

The APC 6000VA Double Conversion Smart-UPS SRT 230V (SRT6KXLI) stands out as a premium solution for businesses demanding top-tier power protection. With its double conversion tech, scalable design, and comprehensive management tools, it ensures your critical systems stay online, no matter the power challenges. Whether you’re upgrading a server room or outfitting a medical facility, this UPS delivers the dependability APC is renowned for.

If you’re evaluating options, consult APC’s official configurator or a reseller for runtime simulations tailored to your load. Ready to power up? CONTACT US @ TIACO TECHNOLOGIES to get yours today. Stay powered, stay protected!

APC Smart-UPS SRT 6000VA 230V (SRT6KXLI): A Comprehensive Review

The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI), manufactured by Schneider Electric, is a high-density, double-conversion online uninterruptible power supply (UPS) designed for businesses and IT professionals needing reliable power protection. Ideal for server rooms, network closets, and critical applications in industries like healthcare, retail, and manufacturing, this UPS ensures uninterrupted operation during power disruptions. In this blog, we’ll explore its specifications, features, performance, and ideal use cases to help you decide if it’s the right solution for your power needs.

Overview

The APC Smart-UPS SRT 6000VA 230V is part of the Smart-UPS On-Line series, offering true double-conversion power protection with a 6kVA/6kW capacity. Its rack/tower convertible design, scalable runtime, and advanced management features make it a versatile choice for protecting servers, voice/data networks, medical labs, and light industrial applications. With a unity power factor, it efficiently supports power-hungry equipment, making it a top choice for modern IT infrastructure.

Key Specifications

  • Power Capacity: 6kW / 6kVA
  • Input Voltage: 230V (configurable for 220V or 240V)
  • Output Voltage: 230V (configurable for 220V or 240V)
  • Output Voltage Distortion: Less than 2% at full load
  • Output Frequency: 50/60 Hz ±3 Hz (sync to mains)
  • Topology: Double Conversion Online
  • Waveform Type: Pure Sine Wave
  • Output Connections: 6x IEC 320 C13, 4x IEC 320 C19, 2x IEC Jumpers, Hard Wire 3-wire (1PH + N + G)
  • Input Connection: Hard Wire 3-wire (1PH + N + G)
  • Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte
  • Runtime: ~5.3 minutes at full load (6kW); ~16.1 minutes at half load (3kW)
  • Recharge Time: ~3 hours
  • Dimensions: 17.0 x 10.4 x 28.3 inches (432 x 263 x 719 mm, 4U rack height)
  • Weight: 132 lbs (60 kg)
  • Efficiency: Up to 94% in online mode, 98% in Green Mode
  • Interface Ports: RJ-45 Serial, SmartSlot, USB, Emergency Power Off (EPO)
  • Noise Level: 55 dB
  • Certifications: CE, CE Mark, EAC, EN/IEC 62040-1, EN/IEC 62040-2, IRAM, RCM, VDE
  • Warranty: 2-year warranty (UPS)
  • Additional Features: Embedded Network Management Card, 1-year Secure Network Management subscription

Design and Build

The APC Smart-UPS SRT 6000VA features a compact, rack/tower convertible design, requiring only 4U of rack space or functioning as a standalone tower. Measuring 17.0 x 10.4 x 28.3 inches and weighing 132 lbs, it’s relatively lightweight for its capacity, making it easier to install in server rooms or network closets. The unit’s durable metal chassis ensures longevity, and its front-panel LCD graphics display provides clear, intuitive access to system status, diagnostics, and configuration settings. The 55 dB noise level is suitable for office environments, balancing performance with minimal disruption.

The UPS includes a pre-installed Network Management Card (AP9631) for remote monitoring and an additional SmartSlot for optional accessories, such as environmental monitoring cards. Its rack/tower convertible design requires separate rail kits (SRTRK2 or SRTRK3) for rack mounting, adding flexibility for various deployment scenarios.

Performance

The SRT6KXLI employs double-conversion online topology, continuously converting incoming AC power to DC and back to AC to deliver clean, pure sine wave output with less than 2% voltage distortion. This ensures compatibility with sensitive equipment, protecting against power surges, spikes, and outages. The UPS achieves up to 94% efficiency in online mode and 98% in Green Mode, a patented feature that bypasses unused electrical components during stable power conditions to reduce energy consumption without sacrificing protection.

At full load (6kW), the UPS provides approximately 5.3 minutes of runtime, extending to 16.1 minutes at half load (3kW). Scalable runtime is supported by adding up to 10 external battery packs (SRT192BP), making it adaptable for prolonged outages. The 3-hour battery recharge time is efficient for its class, ensuring quick recovery after power events. The internal bypass (automatic and manual) ensures continuous power during maintenance or faults, enhancing reliability.

Features

Power Protection and Efficiency

  • Double-Conversion Topology: Delivers zero transfer time and clean power for critical devices.
  • Green Mode: Boosts efficiency to 98% during stable power conditions.
  • Unity Power Factor: Maximizes usable power, supporting high-density loads like blade servers.
  • Internal Bypass: Automatic and manual bypass ensures uninterrupted power during maintenance.

Management and Monitoring

  • Embedded Network Management Card (AP9631): Enables remote monitoring and control via SNMP, web, or telnet, with a 1-year Secure Network Management subscription included.
  • LCD Graphics Display: Displays real-time system parameters, modes, and alarms.
  • PowerChute Network Shutdown: Provides graceful shutdown of physical servers, virtual machines, and HCI clusters.
  • SmartSlot: Supports additional management cards for enhanced functionality, such as environmental monitoring.

Scalability and Serviceability

  • Scalable Runtime: Add up to 10 external battery packs (SRT192BP) for extended runtime.
  • Hot-Swappable Batteries: Allows battery replacement without powering down connected equipment.
  • Battery Failure Notification: Provides early-warning fault analysis for timely maintenance.
  • Modular Design: Simplifies upgrades and servicing, reducing downtime.

Pros and Cons

Pros

  • High-Density Power Protection: 6kW / 6kVA capacity supports critical applications.
  • Reliable Performance: Double-conversion topology ensures clean, stable power.
  • Scalable Runtime: External battery packs extend backup time for long outages.
  • Advanced Management: Network card and LCD display simplify monitoring and control.
  • Efficient Operation: Up to 98% efficiency in Green Mode reduces energy costs.
  • Versatile Design: Rack/tower convertible for flexible deployment.

Cons

  • Weight and Size: At 132 lbs and 4U, it requires adequate space and rack support.
  • Rail Kits Not Included: SRTRK2 or SRTRK3 rail kits for rack mounting are sold separately.
  • Limited Runtime: 5.3 minutes at full load may require additional batteries for extended outages.

Applications

The APC Smart-UPS SRT 6000VA is ideal for:

  • Server Rooms: Protects servers and storage systems from power disruptions.
  • Network Closets: Ensures uptime for voice and data networks.
  • Healthcare Facilities: Safeguards medical equipment requiring stable power.
  • Retail: Supports point-of-sale systems and inventory management.
  • Light Industrial Applications: Powers sensitive machinery and control systems.
  • Edge Computing: Provides reliable power for distributed IT environments.

Its compact design and high-density power make it suitable for environments where space and uptime are critical.

Conclusion

The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) is a powerful, reliable UPS tailored for businesses needing high-density power protection. Its double-conversion topology, scalable runtime, and advanced management features make it an excellent choice for server rooms, network closets, and critical applications across various industries. With a compact rack/tower design, high efficiency, and robust monitoring capabilities, it delivers peace of mind for IT professionals and businesses prioritizing uptime. For those needing a dependable, high-performance UPS, the SRT6KXLI is a worthy investment.

CONTACT US @ TIACO TECHNOLOGIES.

Understanding the APC Smart-UPS SRT 6000VA 230V (SRT6KXLI): Your Ultimate Power Protection Solution

In an era where downtime can cost businesses dearly, the APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) stands out as a robust solution for ensuring uninterrupted power for critical IT infrastructure. This high-performance uninterruptible power supply (UPS) from APC by Schneider Electric is designed to deliver reliable, high-density power protection for servers, data centers, network closets, and mission-critical applications. In this blog, we explore the key features, technical specifications, and benefits of the SRT6KXLI, showcasing why it’s a top choice for industries like healthcare, retail, finance, manufacturing, and industrial automation.

Overview of the APC Smart-UPS SRT 6000VA 230V

The APC Smart-UPS SRT 6000VA (SRT6KXLI) is part of the Smart-UPS On-Line family, renowned for its double-conversion online topology, which ensures zero transfer time to battery power during outages. With a power capacity of 6kVA/6kW, this UPS provides clean, stable power to protect sensitive equipment from outages, surges, and voltage fluctuations. Its tower/rack-mountable design (4U) and scalable runtime capabilities make it versatile for various environments, from edge computing to colocation facilities. Equipped with advanced management features and a preinstalled network management card, the SRT6KXLI offers IT professionals the reliability and control needed to maintain uptime.

Key Features of the SRT6KXLI

1. Double-Conversion Online Topology

The SRT6KXLI uses double-conversion technology, converting incoming AC power to DC and back to AC to deliver a pure sine wave output. This ensures:

  • Zero transfer time to battery during power events, preventing disruptions.
  • Protection against surges, spikes, and electrical noise.
  • Tight voltage and frequency regulation for consistent power delivery.

2. High Power Capacity

With a 6kVA/6kW capacity and a 3:1 load crest factor, the SRT6KXLI supports power-hungry devices like blade servers and heavily loaded equipment racks, making it ideal for demanding applications.

3. Scalable Runtime

The UPS supports extendable runtime through external battery packs (e.g., SRT192BP), allowing businesses to customize backup time for prolonged outages. It provides approximately 2.28 minutes at full load and 8.1 minutes at half load, with auto-recognition of external batteries for seamless configuration.

4. Intelligent Battery Management

APC’s intelligent battery management maximizes battery performance and longevity:

  • Hot-swappable batteries enable replacement without powering down equipment.
  • Temperature-compensated charging extends battery life (typically 3–5 years).
  • Automatic self-tests and predictive failure notifications ensure proactive maintenance.
  • Uses maintenance-free, sealed lead-acid batteries with suspended electrolyte for leakproof reliability.

5. Versatile Output Connections

The SRT6KXLI offers a range of output connections for flexibility:

  • 6x IEC 320 C13 outlets.
  • 4x IEC 320 C19 outlets.
  • 1x Hard Wire 3-wire (H N + G) for direct connections.
  • 2x IEC Jumpers for additional connectivity.
    These options ensure compatibility with diverse equipment, from servers to networking gear.

6. Advanced Management and Connectivity

The UPS includes a preinstalled Web/SNMP Management Card for remote monitoring and control via:

  • RJ-45 10/100 Base-T for network connectivity.
  • RJ-45 Serial, USB, and SmartSlot for additional management cards.
  • LCD graphics display with text and mimic diagrams for real-time system status, including power metrics and alarms.
  • Audible and visible alarms prioritized by severity for quick response.
  • ECO Mode bypasses unused components during stable power conditions, achieving up to 98% efficiency.

7. Flexible Design

  • Tower or 4U rack-mountable form factor for versatile installation.
  • Dimensions: 432 mm (H) x 174 mm (W) x 719 mm (D).
  • Weight: 60 kg.
  • Includes removable support feet, rack mounting brackets, and hardware for easy setup.

8. Energy Efficiency

  • ECO Mode and input power factor correction minimize energy costs.
  • Efficiency at full load is approximately 95%, reducing operational expenses.

9. Robust Surge Protection

  • Surge energy rating: 480 Joules, protecting equipment from damaging surges and spikes.
  • Network-grade power conditioning ensures clean power delivery.

10. Reliability and Warranty

  • 3-year warranty (excluding battery) and 2-year battery warranty.
  • Certified with CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2, RCM, VDE, and RoHS compliance for global reliability.
  • Automatic internal bypass supplies utility power during overloads or faults.

Technical Specifications

  • Output:
    • Max Configurable Power: 6.0 kW / 6.0 kVA
    • Nominal Output Voltage: 230V (configurable for 220V or 240V)
    • Output Voltage Distortion: Less than 2%
    • Output Frequency: 50/60 Hz ± 3 Hz (sync to mains)
    • Waveform Type: Sine wave
    • Topology: Double-conversion online
    • Output Connections: 6x IEC 320 C13, 4x IEC 320 C19, 1x Hard Wire 3-wire (H N + G), 2x IEC Jumpers
    • Bypass: Internal bypass (automatic and manual)
  • Input:
    • Nominal Input Voltage: 230V (configurable for 220V or 240V)
    • Input Frequency: 40–70 Hz (auto-sensing)
    • Input Voltage Range: 160–275V (100–275V at half load)
    • Input Connection: Hard Wire 3-wire (1PH + N + G)
  • Battery & Runtime:
    • Battery Type: Maintenance-free sealed lead-acid
    • Replacement Battery: APCRBC140
    • Nominal Battery Voltage: 192V
    • Typical Recharge Time: 1.5 hours
    • Expected Battery Life: 3–5 years
    • Runtime: ~2.28 minutes at full load, ~8.1 minutes at half load
    • Extendable Runtime: Yes (with external battery packs)
  • Physical:
    • Dimensions (H x W x D): 432 mm x 174 mm x 719 mm
    • Rack Height: 4U
    • Weight: 60.0 kg
    • Color: Black
  • Environmental:
    • Operating Temperature: 0–40°C
    • Operating Relative Humidity: 0–95% (non-condensing)
    • Operating Elevation: 0–3048 meters
    • Audible Noise: 55.0 dBA at 1 meter
    • Online Thermal Dissipation: 1300.0 BTU/hr
    • Protection Class: IP20
  • Communications & Management:
    • Interface Ports: RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot, USB
    • Control Panel: Multifunction LCD status and control console
    • Emergency Power Off (EPO): Yes
    • Included: CD with software, Documentation CD, Installation guide, Temperature probe, USB cable, Warranty card, Web/SNMP Management Card

Benefits of the APC Smart-UPS SRT 6000VA

  1. Seamless Power Continuity:
    The double-conversion topology ensures zero downtime during power events, making it ideal for mission-critical systems.
  2. Scalability:
    External battery packs allow businesses to extend runtime, accommodating growing power needs.
  3. Cost Efficiency:
    ECO Mode and high efficiency (up to 98%) reduce energy costs, while intelligent battery management lowers maintenance expenses.
  4. Remote Management:
    The preinstalled network management card and PowerChute software enable remote monitoring and control, minimizing on-site intervention.
  5. Versatile Deployment:
    The rack/tower convertible design and multiple output connections make it suitable for diverse environments, from data centers to industrial applications.

Applications

The SRT6KXLI is ideal for:

  • Data Centers: Protects servers and storage systems with reliable power.
  • Network Closets: Ensures uptime for routers, switches, and firewalls.
  • Medical Labs: Safeguards sensitive equipment from power disturbances.
  • Industrial Automation: Supports critical systems in manufacturing and industrial settings.
  • Edge Computing and Colocation: Provides robust power protection for distributed IT environments.

Conclusion

The APC Smart-UPS SRT 6000VA 230V (SRT6KXLI) is a high-performance UPS that combines double-conversion online technology, scalable runtime, and advanced management features to deliver unmatched power protection. Its robust design, energy efficiency, and versatile connectivity make it a trusted solution for businesses seeking to protect critical infrastructure from power disruptions. Whether you’re managing a server room, network closet, or industrial setup, the SRT6KXLI ensures reliability and peace of mind.

For more information or to purchase, CONTACT US @ TIACO TECHNOLOGIES.