Powerful APC SRT3000XLI: Ultimate Power Protection

Businesses that depend on clean, uninterrupted power for servers and networking equipment need protection that goes beyond simple battery backup. The APC Smart-UPS SRT3000XLI provides 3kVA/2700W of true double-conversion online protection at 230V. It delivers consistent, regulated power quality that basic UPS systems can’t match.

Introducing the SRT3000XLI

The SRT3000XLI is part of APC’s Smart-UPS SRT series, which provides high-density, double-conversion online power protection with scalable runtime. It is designed for IT professionals and network administrators who want a wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction. It suits small and mid-sized server rooms and networking environments, and it fits businesses that have outgrown line-interactive units.

Double-Conversion Technology in the SRT3000XLI

The SRT3000XLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. The pure sine wave output has zero transfer time, so sensitive equipment stays protected at all times. A wide input range, 100V to 275V, and a frequency window of 40 to 70Hz keep the unit off battery through serious swings, including generator supply.

Consistent Power Quality with the SRT3000XLI

Because it conditions power continuously, the SRT3000XLI shields servers, storage, and networking gear from sags, surges, frequency fluctuation, and harmonic distortion. Equipment sees steady power, which helps prevent instability, unexpected reboots, and premature hardware wear. A 340-joule surge energy rating adds further protection.

Outlets and Connectivity on the SRT3000XLI

The unit has eight IEC C13 outlets and two IEC C19 outlets, plus two IEC jumper cables. That covers servers, switches, and higher-draw devices from one unit. A SmartSlot accepts an optional Network Management Card, and USB and RJ-45 serial ports are included. A multifunction LCD shows status and settings, and management software ships with the unit.

Battery Backup and Scalable Runtime on the SRT3000XLI

The internal battery (505VAh) provides about 4 minutes at full load and about 12 minutes at half load. That is enough for a safe shutdown or a generator handover. For longer outages, you can add up to 10 external SRT96BP battery packs, which can stretch runtime to several hours. The battery recharges in about 3 hours.

High Efficiency of the SRT3000XLI

Efficiency is about 93.5%, and a green mode bypasses unused components in good power conditions to reach very high efficiency without sacrificing protection. Premium online protection doesn’t have to carry the energy overhead older online UPS designs did, so running costs stay manageable.

Reliability and Serviceability Features of the SRT3000XLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, automatic battery tests, and audible and visible alarms add control and early warning. The tower is rack/tower convertible, with rail kits sold separately, and it weighs about 31.3kg. A 3-year warranty is listed for the unit.

Who Should Choose the SRT3000XLI

The SRT3000XLI suits small and mid-sized businesses and IT departments running servers, storage, or networking equipment that demand consistent, high-quality power protection. It is especially valuable for organizations that have outgrown basic line-interactive UPS units and want true online protection.

Final Thoughts on the SRT3000XLI

For businesses that treat power quality as part of their IT strategy, the APC Smart-UPS SRT3000XLI is a dependable, high-performance solution. True double-conversion technology, 93.5% efficiency, and expandable runtime make it a smart investment for growing server rooms and networks. For organizations that want premium, business-grade protection at 3kVA, it is a capable, trustworthy choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRT3000XLI: Ultimate Power Protection

Businesses that depend on clean, uninterrupted power for servers and networking equipment need protection that goes beyond simple battery backup. The APC Smart-UPS SRT3000XLI provides 3kVA/2700W of true double-conversion online protection at 230V. It delivers consistent, regulated power quality that basic UPS systems can’t match.

Introducing the SRT3000XLI

The SRT3000XLI is part of APC’s Smart-UPS SRT series, which provides high-density, double-conversion online power protection with scalable runtime. It is designed for IT professionals and network administrators who want a wide input voltage window, tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction. It suits small and mid-sized server rooms and networking environments, and it fits businesses that have outgrown line-interactive units.

Double-Conversion Technology in the SRT3000XLI

The SRT3000XLI conditions power continuously through its inverter and does not wait for an outage to switch to battery. The pure sine wave output has zero transfer time, so sensitive equipment stays protected at all times. A wide input range, 100V to 275V, and a frequency window of 40 to 70Hz keep the unit off battery through serious swings, including generator supply.

Consistent Power Quality with the SRT3000XLI

Because it conditions power continuously, the SRT3000XLI shields servers, storage, and networking gear from sags, surges, frequency fluctuation, and harmonic distortion. Equipment sees steady power, which helps prevent instability, unexpected reboots, and premature hardware wear. A 340-joule surge energy rating adds further protection.

Outlets and Connectivity on the SRT3000XLI

The unit has eight IEC C13 outlets and two IEC C19 outlets, plus two IEC jumper cables. That covers servers, switches, and higher-draw devices from one unit. A SmartSlot accepts an optional Network Management Card, and USB and RJ-45 serial ports are included. A multifunction LCD shows status and settings, and management software ships with the unit.

Battery Backup and Scalable Runtime on the SRT3000XLI

The internal battery (505VAh) provides about 4 minutes at full load and about 12 minutes at half load. That is enough for a safe shutdown or a generator handover. For longer outages, you can add up to 10 external SRT96BP battery packs, which can stretch runtime to several hours. The battery recharges in about 3 hours.

High Efficiency of the SRT3000XLI

Efficiency is about 93.5%, and a green mode bypasses unused components in good power conditions to reach very high efficiency without sacrificing protection. Premium online protection doesn’t have to carry the energy overhead older online UPS designs did, so running costs stay manageable.

Reliability and Serviceability Features of the SRT3000XLI

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults. Loads restart automatically after a shutdown. An Emergency Power Off (EPO) input, automatic battery tests, and audible and visible alarms add control and early warning. The tower is rack/tower convertible, with rail kits sold separately, and it weighs about 31.3kg. A 3-year warranty is listed for the unit.

Who Should Choose the SRT3000XLI

The SRT3000XLI suits small and mid-sized businesses and IT departments running servers, storage, or networking equipment that demand consistent, high-quality power protection. It is especially valuable for organizations that have outgrown basic line-interactive UPS units and want true online protection.

Final Thoughts on the SRT3000XLI

For businesses that treat power quality as part of their IT strategy, the APC Smart-UPS SRT3000XLI is a dependable, high-performance solution. True double-conversion technology, 93.5% efficiency, and expandable runtime make it a smart investment for growing server rooms and networks. For organizations that want premium, business-grade protection at 3kVA, it is a capable, trustworthy choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SMT3000RM12U: Ultimate Power Protection

Businesses running dense rack environments need power protection that delivers both strong capacity and clear, at-a-glance monitoring. The APC Smart-UPS C SMT3000RM12U meets this need, offering 3000VA of dependable line-interactive protection at 230V in a rack-mountable design, complete with an informative LCD display for real-time status insight.

Introducing the SMT3000RM12U

The SMT3000RM12U is part of APC’s Smart-UPS C series, built to bring smart, space-conscious power protection to rack-based server rooms and networking environments. With a 3000VA capacity, it offers substantial headroom for protecting multiple servers, switches, and networking devices simultaneously, making it a strong fit for growing IT environments with denser equipment loads.

Line-Interactive Protection in the SMT3000RM12U

The SMT3000RM12U uses line-interactive technology to automatically correct voltage sags and surges without unnecessarily switching to battery power. This efficient approach helps preserve battery life while still delivering fast, dependable protection during genuine outages, keeping connected servers and networking equipment shielded from unstable power conditions.

LCD Display and Real-Time Monitoring on the SMT3000RM12U

A key feature of the SMT3000RM12U is its built-in LCD display, which provides clear, real-time information on power status, battery health, load levels, and estimated runtime. This visibility allows IT staff to quickly assess the health of their power protection setup directly from the rack, without needing separate monitoring software for basic status checks.

Rack-Mount Design and Space Efficiency of the SMT3000RM12U

Built for rack deployment, the SMT3000RM12U is designed to integrate cleanly into existing server rack layouts, helping businesses consolidate power protection without sacrificing excessive rack space. This makes it a practical choice for server rooms and networking closets where efficient use of rack real estate is a priority.

Battery Backup Runtime with the SMT3000RM12U

During a power outage, the SMT3000RM12U provides dependable runtime that allows IT teams to save critical data, shut down systems safely, or transition to alternate power sources. This buffer plays an important role in protecting rack-mounted servers and networking equipment from the risks associated with sudden, unplanned shutdowns.

Solid Capacity for Dense Rack Environments: The SMT3000RM12U

At 3000VA, the SMT3000RM12U offers enough capacity to support multiple pieces of rack-mounted equipment from a single unit, reducing the need for multiple smaller UPS systems and simplifying overall power protection management within the rack.

Who Should Choose the SMT3000RM12U

The SMT3000RM12U is well suited for businesses and IT departments running rack-based server or networking setups that need both solid backup capacity and clear, built-in monitoring. It’s particularly valuable for environments where rack space efficiency and power visibility are equally important priorities.

Final Thoughts on the SMT3000RM12U

Reliable rack power protection paired with clear, informative monitoring makes the APC Smart-UPS C SMT3000RM12U a strong choice for growing IT environments. With its solid 3000VA capacity, dependable line-interactive protection, and built-in LCD display, it offers businesses a practical way to safeguard critical rack equipment while staying informed. For organizations seeking dependable, visible UPS protection for their server racks, the SMT3000RM12U is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv EDGE-3000IRT2UXL: Ultimate Protection!

Growing businesses need power protection that delivers real capacity without demanding excessive space, complexity, or budget. The Vertiv EDGE UPS EDGE-3000IRT2UXL rises to that challenge, offering 3kVA of dependable line-interactive protection at 230V in a compact 2U rack or tower design built for small server rooms and networking environments.

Introducing the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL sits at the top of Vertiv’s EDGE UPS series, an entry-level lineup engineered to give small and mid-sized businesses genuine, dependable power protection without unnecessary cost or complexity. With a 3kVA capacity in a 2U rack/tower convertible chassis, it’s built to protect multiple servers, switches, and networking devices from a single, centralized unit.

Line-Interactive Protection in the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL uses line-interactive technology to automatically correct voltage sags and surges without unnecessarily switching to battery power. This efficient approach helps preserve battery life while still delivering fast, dependable protection during genuine power outages, shielding connected servers and networking equipment from the wear caused by unstable electrical conditions.

Rack/Tower Convertible Design of the EDGE-3000IRT2UXL

A genuine strength of the EDGE-3000IRT2UXL is its flexible 2U rack or tower form factor, allowing IT teams to deploy it into a standard server rack or run it as a standalone tower unit depending on the site’s physical layout. This adaptability makes it easier to integrate into existing infrastructure without committing to a rigid, single-configuration installation.

Battery Backup Runtime with the EDGE-3000IRT2UXL

During a power outage, the EDGE-3000IRT2UXL provides dependable runtime that gives IT teams the time needed to save critical data, execute safe shutdown procedures, or transition to backup power sources. This runtime buffer plays a crucial role in preventing data loss and equipment damage that can result from sudden, unplanned power interruptions.

Compact 2U Footprint of the EDGE-3000IRT2UXL

Rack space is a valuable resource in any server room, and the EDGE-3000IRT2UXL’s 2U footprint ensures that solid 3kVA backup capacity doesn’t come at the cost of excessive rack real estate. This efficient design makes it easy to integrate into existing rack layouts without sacrificing space needed for servers, switches, or other critical equipment.

Remote Monitoring Capabilities of the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL supports remote monitoring features that let IT teams track power status, battery health, and load levels without needing to physically check the unit. This visibility is especially valuable for businesses managing multiple locations or unstaffed server closets, helping catch developing issues before they escalate into unplanned downtime.

Who Should Choose the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL is well suited for small to mid-sized businesses and IT departments running multiple servers or networking devices that need dependable, higher-capacity line-interactive protection with genuine rack or tower deployment flexibility. It’s particularly valuable for organizations consolidating power protection across several critical pieces of equipment.

Final Thoughts on the EDGE-3000IRT2UXL

Reliable, high-capacity power protection paired with genuine deployment flexibility makes the Vertiv EDGE UPS EDGE-3000IRT2UXL a strong choice for growing IT environments. With its dependable line-interactive protection, space-efficient 2U design, and remote monitoring capabilities, it offers businesses a practical way to safeguard critical equipment while adapting to whatever physical setup their facility demands. For organizations seeking dependable, high-capacity UPS protection at 3kVA, the EDGE-3000IRT2UXL is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert GXT RT 3kVA: Ultimate Power Protection.

Growing server rooms and space-constrained facilities need power protection that scales without sacrificing efficiency or flexibility. The Vertiv Liebert GXT RT+ GXTRT-3000IRT2UXL delivers exactly that, offering 3kVA/2700W of true online double-conversion protection at 230V in a compact, flexible rack or tower design built for serious, business-critical deployment.

Introducing the GXTRT-3000IRT2UXL

The GXTRT-3000IRT2UXL sits at the top of Vertiv’s Liebert GXT RT+ series, offering online technology with two stages of power conversion for superior, yet affordable power protection. With flexible rack or tower mounting options, it’s ideal for edge or space-constrained facilities where reliable, efficient power protection is needed to ensure business continuity at a meaningfully higher capacity level.

Online Double-Conversion Technology in the GXTRT-3000IRT2UXL

At the core of the GXTRT-3000IRT2UXL is true online double-conversion architecture, continuously regulating power through the UPS’s inverter rather than switching to battery only during an outage. This delivers a clean, tightly regulated sine wave output with zero transfer time, providing the high-performance protection that servers, networking equipment, and other critical infrastructure demand.

High 0.9-1.0 Power Factor on the GXTRT-3000IRT2UXL

The GXTRT-3000IRT2UXL offers a high 0.9 to 1.0 power factor, delivering improved utilization of its rated capacity as genuinely usable power for connected equipment. With a wide range of input voltage operation, the UPS provides more usable power for more connected loads, driving real space and cost savings for facilities deploying the unit.

ECO Mode Efficiency of the GXTRT-3000IRT2UXL

A configurable ECO operation mode on the GXTRT-3000IRT2UXL enables up to 95 percent efficiency for genuine energy savings, a compelling addition to its overall total cost of ownership. This efficiency-focused design allows businesses to benefit from true online protection without absorbing the steep energy overhead that older double-conversion UPS technology once demanded.

Compact Rack/Tower Dimensions of the GXTRT-3000IRT2UXL

Measuring 438 x 632 x 88mm and weighing approximately 27.6kg, the GXTRT-3000IRT2UXL is engineered for streamlined selection and deployment thanks to genuine rack or tower mounting flexibility. This footprint makes it a strong fit for growing server rooms, edge locations, and space-constrained facilities where every inch of room carries real value.

Battery Backup and Extended Runtime with the GXTRT-3000IRT2UXL

The GXTRT-3000IRT2UXL delivers approximately 3.3 minutes of runtime at 100% load, extending to roughly 26 minutes at 25% load. A smart battery charger design and external battery cabinet compatibility mean facilities have real peace of mind that critical loads stay supported during a utility power interruption, with the flexibility to extend runtime further as needed.

LCD Interface and Network Monitoring on the GXTRT-3000IRT2UXL

The GXTRT-3000IRT2UXL features a user-friendly color LCD interface, providing complete UPS status and configuration information at a glance. Network interface or serial connections further enable remote access for power consumption monitoring and alert notification configuration, ensuring maximum value for best-in-class power protection across the facility.

Robust Output Connectivity of the GXTRT-3000IRT2UXL

With 6 x IEC60320 C13 and 1 x IEC60320 C19 output receptacles, paired with an IEC60320 C20 input connector, the GXTRT-3000IRT2UXL offers generous, practical connectivity for multiple servers, switches, and higher-draw networking equipment. This outlet mix reduces the need for additional distribution hardware when protecting several devices from a single unit.

Who Should Choose the GXTRT-3000IRT2UXL

The GXTRT-3000IRT2UXL is well suited for growing server rooms, edge deployments, and space-constrained facilities that need genuine online double-conversion protection at a meaningfully higher capacity than entry-level GXT RT+ models. It’s particularly valuable for organizations that want rack or tower flexibility alongside strong outlet capacity and remote monitoring options.

Final Thoughts on the GXTRT-3000IRT2UXL

For growing IT environments that demand serious online power quality without an oversized footprint, the Vertiv Liebert GXT RT+ GXTRT-3000IRT2UXL delivers a compelling combination of double-conversion reliability, high power factor efficiency, and genuine rack/tower flexibility. With smart battery management, LCD-driven visibility, and robust outlet connectivity, it stands out as a smart, capable investment for businesses protecting their 3kVA critical infrastructure.

CONTACT US @ TIACO TECHNOLOGIES.

APC Smart-UPS C 3000VA Rack Mount LCD 230V (SMT3000RM12U): High-Capacity Rack Protection with Clear Visibility

Businesses running dense rack environments need power protection that delivers both strong capacity and clear, at-a-glance monitoring. The APC Smart-UPS C SMT3000RM12U meets this need, offering 3000VA of dependable line-interactive protection at 230V in a rack-mountable design, complete with an informative LCD display for real-time status insight.

Introducing the SMT3000RM12U

The SMT3000RM12U is part of APC’s Smart-UPS C series, built to bring smart, space-conscious power protection to rack-based server rooms and networking environments. With a 3000VA capacity, it offers substantial headroom for protecting multiple servers, switches, and networking devices simultaneously, making it a strong fit for growing IT environments with denser equipment loads.

Line-Interactive Protection in the SMT3000RM12U

The SMT3000RM12U uses line-interactive technology to automatically correct voltage sags and surges without unnecessarily switching to battery power. This efficient approach helps preserve battery life while still delivering fast, dependable protection during genuine outages, keeping connected servers and networking equipment shielded from unstable power conditions.

LCD Display and Real-Time Monitoring on the SMT3000RM12U

A key feature of the SMT3000RM12U is its built-in LCD display, which provides clear, real-time information on power status, battery health, load levels, and estimated runtime. This visibility allows IT staff to quickly assess the health of their power protection setup directly from the rack, without needing separate monitoring software for basic status checks.

Rack-Mount Design and Space Efficiency of the SMT3000RM12U

Built for rack deployment, the SMT3000RM12U is designed to integrate cleanly into existing server rack layouts, helping businesses consolidate power protection without sacrificing excessive rack space. This makes it a practical choice for server rooms and networking closets where efficient use of rack real estate is a priority.

Battery Backup Runtime with the SMT3000RM12U

During a power outage, the SMT3000RM12U provides dependable runtime that allows IT teams to save critical data, shut down systems safely, or transition to alternate power sources. This buffer plays an important role in protecting rack-mounted servers and networking equipment from the risks associated with sudden, unplanned shutdowns.

Solid Capacity for Dense Rack Environments: The SMT3000RM12U

At 3000VA, the SMT3000RM12U offers enough capacity to support multiple pieces of rack-mounted equipment from a single unit, reducing the need for multiple smaller UPS systems and simplifying overall power protection management within the rack.

Who Should Choose the SMT3000RM12U

The SMT3000RM12U is well suited for businesses and IT departments running rack-based server or networking setups that need both solid backup capacity and clear, built-in monitoring. It’s particularly valuable for environments where rack space efficiency and power visibility are equally important priorities.

Final Thoughts on the SMT3000RM12U

Reliable rack power protection paired with clear, informative monitoring makes the APC Smart-UPS C SMT3000RM12U a strong choice for growing IT environments. With its solid 3000VA capacity, dependable line-interactive protection, and built-in LCD display, it offers businesses a practical way to safeguard critical rack equipment while staying informed. For organizations seeking dependable, visible UPS protection for their server racks, the SMT3000RM12U is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

APC Smart-UPS C 3000VA Rack Mount LCD 230V (SMT3000RM12U): High-Capacity Rack Protection with Clear Visibility

Businesses running dense rack environments need power protection that delivers both strong capacity and clear, at-a-glance monitoring. The APC Smart-UPS C SMT3000RM12U meets this need, offering 3000VA of dependable line-interactive protection at 230V in a rack-mountable design, complete with an informative LCD display for real-time status insight.

Introducing the SMT3000RM12U

The SMT3000RM12U is part of APC’s Smart-UPS C series, built to bring smart, space-conscious power protection to rack-based server rooms and networking environments. With a 3000VA capacity, it offers substantial headroom for protecting multiple servers, switches, and networking devices simultaneously, making it a strong fit for growing IT environments with denser equipment loads.

Line-Interactive Protection in the SMT3000RM12U

The SMT3000RM12U uses line-interactive technology to automatically correct voltage sags and surges without unnecessarily switching to battery power. This efficient approach helps preserve battery life while still delivering fast, dependable protection during genuine outages, keeping connected servers and networking equipment shielded from unstable power conditions.

LCD Display and Real-Time Monitoring on the SMT3000RM12U

A key feature of the SMT3000RM12U is its built-in LCD display, which provides clear, real-time information on power status, battery health, load levels, and estimated runtime. This visibility allows IT staff to quickly assess the health of their power protection setup directly from the rack, without needing separate monitoring software for basic status checks.

Rack-Mount Design and Space Efficiency of the SMT3000RM12U

Built for rack deployment, the SMT3000RM12U is designed to integrate cleanly into existing server rack layouts, helping businesses consolidate power protection without sacrificing excessive rack space. This makes it a practical choice for server rooms and networking closets where efficient use of rack real estate is a priority.

Battery Backup Runtime with the SMT3000RM12U

During a power outage, the SMT3000RM12U provides dependable runtime that allows IT teams to save critical data, shut down systems safely, or transition to alternate power sources. This buffer plays an important role in protecting rack-mounted servers and networking equipment from the risks associated with sudden, unplanned shutdowns.

Solid Capacity for Dense Rack Environments: The SMT3000RM12U

At 3000VA, the SMT3000RM12U offers enough capacity to support multiple pieces of rack-mounted equipment from a single unit, reducing the need for multiple smaller UPS systems and simplifying overall power protection management within the rack.

Who Should Choose the SMT3000RM12U

The SMT3000RM12U is well suited for businesses and IT departments running rack-based server or networking setups that need both solid backup capacity and clear, built-in monitoring. It’s particularly valuable for environments where rack space efficiency and power visibility are equally important priorities.

Final Thoughts on the SMT3000RM12U

Reliable rack power protection paired with clear, informative monitoring makes the APC Smart-UPS C SMT3000RM12U a strong choice for growing IT environments. With its solid 3000VA capacity, dependable line-interactive protection, and built-in LCD display, it offers businesses a practical way to safeguard critical rack equipment while staying informed. For organizations seeking dependable, visible UPS protection for their server racks, the SMT3000RM12U is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

True Online Protection in a Compact 2U Design: The Vertiv GXT4-3000RT230E

Servers and IT equipment don’t get the luxury of “mostly protected” — they need genuinely continuous power, without gaps, without exceptions. The Vertiv Liebert GXT4-3000RT230E delivers exactly that: real online double-conversion protection at 3000VA, packed into a compact, versatile 2U rack/tower design.

What the Vertiv GXT4-3000RT230E Delivers

The Liebert GXT4-3000RT230E is a true on-line UPS that delivers continuous, high-quality AC power to connected equipment with no interruption when transferring to the battery. It protects equipment from virtually all power disturbances caused by blackouts, brownouts, sags, surges, or noise interference. For robust UPS protection of up to 3kVA, the Liebert GXT4 provides industry-leading features in a compact 2U design, delivering a rated capacity of 3000VA / 2700W.

Zero Transfer Time on the Vertiv GXT4-3000RT230E

Because it’s genuine online double-conversion technology, the on-line design means zero transfer time. If utility power fails, your critical load will be supported by a seamless flow of power — connected equipment never experiences even a momentary gap when switching from utility to battery power, unlike line-interactive designs that require a brief switchover moment.

Power Quality and Voltage Regulation

Power is conditioned without drawing on battery, extending battery life, and this continuous power conditioning ensures a seamless transfer to battery power that keeps equipment running uninterrupted during an outage. The unit accepts a 230V AC nominal input, with a real-world operating range of 115 to 280V AC depending on output load, and delivers pure sine wave output configurable across 200/208/220/230/240V — genuine tolerance for unstable grid conditions and flexibility across regional power standards.

Outlets and Connections on the Vertiv GXT4-3000RT230E

The unit comes with an IEC 320-C20 input connection and six IEC320-C13 outlets plus one IEC320-C19 outlet — a genuinely comprehensive layout that accommodates both standard equipment and higher-draw devices from a single unit. Input power factor is greater than 0.99, meaning nearly all of the unit’s capacity translates into real, usable output power.

Hot-Swappable Batteries and Runtime

Hot-swappable batteries provide up to 3 minutes of runtime at full load with the ability to add up to six external battery cabinets for extended runtimes — a genuine, scalable path to hours of backup time for facilities that need real bridging capability during an extended outage, rather than just a few minutes for an emergency shutdown. The battery configuration itself uses valve-regulated, non-spillable lead-acid batteries, specifically 6 x 12V x 9.0Ah for the 3000VA model, giving easy serviceability with replaceable, hot-swappable batteries that never require powering down connected equipment to service.

Compact 2U Rack/Tower Design

The unit measures approximately 430 x 602 x 85mm, and includes all hardware for installing it as a tower or in an equipment rack — a genuinely versatile physical design that lets facilities teams choose the deployment format that fits their specific environment, without needing separately sourced mounting hardware.

Programmable Outlet Control

Controllable power to multiple devices is available via two independently programmable pairs of sockets — a genuinely useful feature for selectively power-cycling a frozen device or shedding non-critical load during an extended outage without disturbing the rest of your connected equipment.

Energy Efficiency and ECO Mode

The unit is ENERGY STAR qualified and includes a selectable ECO mode that enhances efficiency during off hours — real, independently verified efficiency credentials that translate into lower operating costs and reduced heat generation over the unit’s operating lifespan.

Communication and Management

Communication options include USB port, Liebert IntelliSlot port, and terminal-block communication, along with dry contacts for remote monitoring — giving IT teams flexible paths to integrate the GXT4-3000RT230E into their existing monitoring workflow. Included Liebert Multilink shutdown software ensures graceful, unattended shutdown of connected servers and workstations during an extended outage, protecting data integrity even when nobody’s available to intervene manually.

Serviceability Built for Optional Maintenance

An optional Liebert MicroPOD allows for maintenance bypass, meaning servicing the UPS doesn’t have to interrupt power to connected loads — a genuinely important feature for infrastructure that can’t tolerate planned downtime any more than unplanned outages.

Backed by a Solid Warranty

The Vertiv GXT4-3000RT230E comes with a 2-year repair or replace warranty, giving genuine assurance behind a unit engineered for applications with zero tolerance for downtime.

The Bottom Line on the Vertiv GXT4-3000RT230E

For applications that simply cannot tolerate even a momentary power gap, the Vertiv Liebert GXT4-3000RT230E delivers exactly what true online protection demands: zero transfer time, hot-swappable batteries with runtime extendable through up to six external battery cabinets, ENERGY STAR-qualified efficiency, and comprehensive management through USB, IntelliSlot, and dry contacts. It’s compact, industry-leading protection built for the infrastructure that genuinely can’t afford compromise.

CONTACT US @ TIACO TECHNOLOGIES.