Powerful Vertiv Liebert EXS 40kVA: Ultimate Protection

In a world where even a split-second power interruption can cost businesses thousands in lost productivity, data corruption, or damaged equipment, settling for ordinary backup is no longer an option. Meet the game-changing solution that delivers rock-solid protection without compromise: the Vertiv Liebert EXS 40kVA 0MIN autonomy Double-Conversion UPS, identified by its precise part number ITC401A0101A00A.

This is not just another UPS. It is a high-efficiency, three-phase online double-conversion power protection system engineered for modern IT environments, industrial applications, server rooms, and critical infrastructure where continuous clean power is non-negotiable. With zero internal battery autonomy, the ITC401A0101A00A is designed for maximum flexibility—pairing with external battery cabinets so you can scale runtime exactly to your needs while keeping the UPS footprint remarkably compact.

Why ITC401A0101A00A Delivers Unmatched Double-Conversion Reliability

True online double-conversion topology means the ITC401A0101A00A continuously converts incoming AC power to DC and then back to precise, regulated AC output. Your critical loads never see the raw utility power. Voltage fluctuations, frequency variations, harmonic distortion, surges, and noise are completely isolated. The result is pure sine-wave power that keeps servers, networking gear, medical equipment, and industrial controllers running smoothly even when the grid is unstable.

This architecture provides the highest level of protection available short of a full power plant. When the utility fails, transfer to battery is seamless and instantaneous—zero transfer time—so sensitive electronics never experience a brownout or glitch.

ITC401A0101A00A Efficiency That Slashes Operating Costs

Energy efficiency is where the ITC401A0101A00A truly shines. In double-conversion mode it reaches up to 96.2 percent efficiency. Switch to ECO mode and efficiency climbs as high as 99 percent. Over years of continuous operation those percentage points translate into substantial electricity savings and reduced cooling requirements.

A unity (1.0) output power factor means the full 40 kVA is available as 40 kW of real power. You get more usable capacity from the same footprint compared with older UPS systems that derate under non-unity power factors. Input power factor of 0.99 and input current THD as low as 3 percent further reduce strain on upstream generators and transformers while improving overall site power quality.

Compact Design and Installation Advantages of ITC401A0101A00A

Space is money. The ITC401A0101A00A measures just 440 mm wide by 750 mm deep by 1600 mm high and weighs approximately 200 kg. Its slim tower/rack-compatible form factor fits easily into constrained server rooms or industrial panels. Integrated input and output breakers or switches, a manual maintenance bypass, and parallel load-bus synchronization (LBS) ports simplify installation and future expansion.

Because the unit ships with 0 minutes of internal autonomy, you avoid carrying unnecessary battery weight and heat inside the UPS cabinet. Instead you select external battery cabinets sized precisely for your required runtime—whether five minutes for orderly shutdown or hours for extended operation. A robust 13 A battery charger ensures fast recharge once utility power returns.

Scalability and High Availability with ITC401A0101A00A

Need more capacity or redundancy? Parallel up to four ITC401A0101A00A units for either capacity growth or N+1 redundancy. The integrated parallel bus and synchronization features make multi-unit configurations straightforward. Load-bus synchronization support further enhances compatibility with dual-bus architectures common in higher-availability data centers.

USB connectivity and optional network cards open the door to remote monitoring, SNMP, Modbus, and integration with building-management systems so you always know the health of your power protection layer.

Ideal Applications for the ITC401A0101A00A

  • Small to mid-size data centers and server rooms
  • Industrial automation and process control
  • Medical imaging and laboratory equipment
  • Telecommunications and network hubs
  • Financial trading floors and critical office infrastructure
  • Any site requiring clean, continuous three-phase power with external battery flexibility

The Bottom-Line Persuasion: Why Choose ITC401A0101A00A Now

Every minute of downtime erodes revenue, reputation, and customer trust. The ITC401A0101A00A eliminates that risk with proven Vertiv Liebert engineering, industry-leading efficiency, and the freedom to match battery autonomy exactly to your operational requirements. You invest in a compact, highly efficient double-conversion UPS that delivers full 40 kW of clean power, scales with your business, and keeps total cost of ownership low through energy savings and simplified maintenance.

Stop gambling with power quality. Equip your critical systems with the ITC401A0101A00A—the Vertiv Liebert EXS 40kVA 0MIN autonomy Double-Conversion UPS that turns power vulnerability into rock-solid reliability. Contact your authorized Vertiv partner today and secure continuous uptime for the loads that matter most.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 40kVA: Ultimate Protection

When power protection has to scale beyond rack-level UPS units, businesses turn to systems built for centralized, three-phase infrastructure. The APC Smart-UPS VT SUVTP40KH4B4S provides 40kVA/32kW of true online three-phase protection at 400V. It carries the reliability of the Smart-UPS family, which has more than 10 million units installed worldwide.

Introducing the SUVTP40KH4B4S

The SUVTP40KH4B4S is a tower-format UPS built for small data centers, large retail stores, regional offices, and laboratories that need serious, centralized power protection. At 40kVA and 32kW of output, it supports substantial IT and facility loads from one unified system. Hardwired three-phase input and output connections suit a permanent, professional installation.

Three-Phase Input and Output Configuration of the SUVTP40KH4B4S

The unit is configured for three-phase input and output at 400V, so it integrates directly into commercial and industrial electrical infrastructure. Output connections include hardwired 4-wire and 5-wire options along with screw terminals, so electricians can configure the installation to site requirements.

Dual-Mains Input and Automatic Bypass on the SUVTP40KH4B4S

The SUVTP40KH4B4S has a dual-mains input with automatic bypass. It can draw from two separate utility feeds and switch to bypass automatically when needed. That improves system availability and reduces the risk that a single point of failure takes down protected equipment.

Scalable, Hot-Swappable Battery Runtime with the SUVTP40KH4B4S

Hot-swappable battery modules let you extend or maintain runtime without powering down the system. Typical backup is about 5 to 7 minutes at full load and about 18 to 22 minutes at half load. That is a meaningful window to transfer to generator power or run controlled shutdown procedures in a longer outage.

Remote Monitoring and Management of the SUVTP40KH4B4S

With APC’s Network Management Card, the unit supports remote monitoring and management through Web and SNMP, including temperature monitoring for fuller visibility into operating conditions. Data center and facility teams get real-time insight into power status across critical three-phase infrastructure.

Serviceability and Parallel Capability of the SUVTP40KH4B4S

User-replaceable batteries and an internal maintenance bypass keep long-term service simple, which reduces reliance on specialist technicians for routine battery maintenance. Parallel capability lets you combine multiple units for more capacity or redundancy, so there is a scalable path as needs grow.

Who Should Choose the SUVTP40KH4B4S

The SUVTP40KH4B4S suits small data centers, large retail operations, regional offices, and laboratories that need dependable, centralized three-phase protection at scale. It is especially valuable for organizations that want dual-mains resilience, remote manageability, and the option to expand capacity in parallel.

Final Thoughts on the SUVTP40KH4B4S

For organizations that have outgrown rack-level UPS protection, the APC Smart-UPS VT SUVTP40KH4B4S offers a centralized solution built on proven three-phase technology. Dual-mains input, automatic bypass, hot-swappable batteries, and robust remote monitoring deliver the enterprise-grade reliability that small data centers and critical facilities depend on. For businesses ready to invest in scalable three-phase protection, it is a strong, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Easy UPS 3S 40kVA: Secure, Reliable UPS Power

As data centers, server rooms, and industrial sites grow, their power protection has to grow with them. The Schneider Electric Easy UPS 3S E3SUPS40KHB1 delivers 40kVA of online three-phase protection at 400V in a 3:3 configuration. It uses internal batteries and suits larger, more demanding environments.

Introducing the E3SUPS40KHB1

The E3SUPS40KHB1 is part of the Easy UPS 3S range, a high-efficiency three-phase family built for data centers, server rooms, and electrical control systems in industrial settings. At 40kVA, it supports larger server rooms, expanded rack deployments, and industrial control systems that need more capacity than the smaller 3S models provide.

Three-Phase Power Delivery with the E3SUPS40KHB1

The 3:3 configuration accepts three-phase input and delivers three-phase output, which suits facilities built around three-phase supply. It gives more balanced, efficient distribution for large loads than single-phase systems. Online double-conversion technology conditions power continuously, so connected equipment is shielded from sags, surges, and frequency instability at all times.

Internal Battery Runtime on the E3SUPS40KHB1

The internal-battery design keeps the unit compact and saves the floor space an external battery cabinet would take. The listed runtime is about 15 minutes at full load. That gives facility and IT teams a solid window for safe shutdowns, a generator handover, or a short outage. Confirm the runtime for your actual load with your supplier.

High Efficiency and Lower Operating Costs: The E3SUPS40KHB1 Advantage

Easy UPS 3S units are built for high energy efficiency, which reduces running costs across the life of the system. At 40kVA, even small efficiency gains add up to meaningful savings. Less wasted energy also means less heat for your cooling system to handle.

Scalable Capacity with the E3SUPS40KHB1

Up to four Easy UPS 3S units can work together for more capacity or added redundancy. You can start with one unit and add more as the facility grows, which protects the original investment.

Monitoring and Serviceability of the E3SUPS40KHB1

The unit supports local and remote monitoring through the Easy UPS 3S communication interfaces. Schneider Electric’s service team is available to help maintain the UPS and its batteries. Installation, wiring, protections, and battery setup should be done by qualified personnel in line with Schneider Electric documentation.

400V System Compatibility of the E3SUPS40KHB1

Built for 400V three-phase systems, the E3SUPS40KHB1 integrates with standard commercial and industrial power infrastructure. That simplifies deployment and avoids extra voltage conversion equipment.

Who Should Choose the E3SUPS40KHB1

The E3SUPS40KHB1 suits larger businesses, data centers, telecoms sites, and industrial facilities with three-phase supply that need substantial UPS capacity. It is especially valuable for organizations that have outgrown the smaller Easy UPS 3S models and want headroom for further expansion.

Final Thoughts on the E3SUPS40KHB1

As facilities scale, their power protection has to scale with them. The Schneider Electric E3SUPS40KHB1 combines 40kVA online protection, an internal-battery design, high efficiency, and the option to add units. For organizations that need higher-capacity, business-grade three-phase protection, it is a smart, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 40kVA: Ultimate Power Defense

When power protection has to scale beyond rack-level UPS units, businesses turn to systems built for centralized, three-phase infrastructure. The APC Smart-UPS VT SUVTP40KH4B4S provides 40kVA/32kW of true online three-phase protection at 400V. It carries the reliability of the Smart-UPS family, which has more than 10 million units installed worldwide.

Introducing the SUVTP40KH4B4S

The SUVTP40KH4B4S is a tower-format UPS built for small data centers, large retail stores, regional offices, and laboratories that need serious, centralized power protection. At 40kVA and 32kW of output, it supports substantial IT and facility loads from one unified system. Hardwired three-phase input and output connections suit a permanent, professional installation.

Three-Phase Input and Output Configuration of the SUVTP40KH4B4S

The unit is configured for three-phase input and output at 400V, so it integrates directly into commercial and industrial electrical infrastructure. Output connections include hardwired 4-wire and 5-wire options along with screw terminals, so electricians can configure the installation to site requirements.

Dual-Mains Input and Automatic Bypass on the SUVTP40KH4B4S

The SUVTP40KH4B4S has a dual-mains input with automatic bypass. It can draw from two separate utility feeds and switch to bypass automatically when needed. That improves system availability and reduces the risk that a single point of failure takes down protected equipment.

Scalable, Hot-Swappable Battery Runtime with the SUVTP40KH4B4S

Hot-swappable battery modules let you extend or maintain runtime without powering down the system. Typical backup is about 5 to 7 minutes at full load and about 18 to 22 minutes at half load. That is a meaningful window to transfer to generator power or run controlled shutdown procedures in a longer outage.

Remote Monitoring and Management of the SUVTP40KH4B4S

With APC’s Network Management Card, the unit supports remote monitoring and management through Web and SNMP, including temperature monitoring for fuller visibility into operating conditions. Data center and facility teams get real-time insight into power status across critical three-phase infrastructure.

Serviceability and Parallel Capability of the SUVTP40KH4B4S

User-replaceable batteries and an internal maintenance bypass keep long-term service simple, which reduces reliance on specialist technicians for routine battery maintenance. Parallel capability lets you combine multiple units for more capacity or redundancy, so there is a scalable path as needs grow.

Who Should Choose the SUVTP40KH4B4S

The SUVTP40KH4B4S suits small data centers, large retail operations, regional offices, and laboratories that need dependable, centralized three-phase protection at scale. It is especially valuable for organizations that want dual-mains resilience, remote manageability, and the option to expand capacity in parallel.

Final Thoughts on the SUVTP40KH4B4S

For organizations that have outgrown rack-level UPS protection, the APC Smart-UPS VT SUVTP40KH4B4S offers a centralized solution built on proven three-phase technology. Dual-mains input, automatic bypass, hot-swappable batteries, and robust remote monitoring deliver the enterprise-grade reliability that small data centers and critical facilities depend on. For businesses ready to invest in scalable three-phase protection, it is a strong, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Easy UPS 3S 40kVA: Ultimate Backup Protection

As data centers, server rooms, and industrial sites grow, their power protection has to grow with them. The Schneider Electric Easy UPS 3S E3SUPS40KHB1 delivers 40kVA of online three-phase protection at 400V in a 3:3 configuration. It uses internal batteries and suits larger, more demanding environments.

Introducing the E3SUPS40KHB1

The E3SUPS40KHB1 is part of the Easy UPS 3S range, a high-efficiency three-phase family built for data centers, server rooms, and electrical control systems in industrial settings. At 40kVA, it supports larger server rooms, expanded rack deployments, and industrial control systems that need more capacity than the smaller 3S models provide.

Three-Phase Power Delivery with the E3SUPS40KHB1

The 3:3 configuration accepts three-phase input and delivers three-phase output, which suits facilities built around three-phase supply. It gives more balanced, efficient distribution for large loads than single-phase systems. Online double-conversion technology conditions power continuously, so connected equipment is shielded from sags, surges, and frequency instability at all times.

Internal Battery Runtime on the E3SUPS40KHB1

The internal-battery design keeps the unit compact and saves the floor space an external battery cabinet would take. The listed runtime is about 15 minutes at full load. That gives facility and IT teams a solid window for safe shutdowns, a generator handover, or a short outage. Confirm the runtime for your actual load with your supplier.

High Efficiency and Lower Operating Costs: The E3SUPS40KHB1 Advantage

Easy UPS 3S units are built for high energy efficiency, which reduces running costs across the life of the system. At 40kVA, even small efficiency gains add up to meaningful savings. Less wasted energy also means less heat for your cooling system to handle.

Scalable Capacity with the E3SUPS40KHB1

Up to four Easy UPS 3S units can work together for more capacity or added redundancy. You can start with one unit and add more as the facility grows, which protects the original investment.

Monitoring and Serviceability of the E3SUPS40KHB1

The unit supports local and remote monitoring through the Easy UPS 3S communication interfaces. Schneider Electric’s service team is available to help maintain the UPS and its batteries. Installation, wiring, protections, and battery setup should be done by qualified personnel in line with Schneider Electric documentation.

400V System Compatibility of the E3SUPS40KHB1

Built for 400V three-phase systems, the E3SUPS40KHB1 integrates with standard commercial and industrial power infrastructure. That simplifies deployment and avoids extra voltage conversion equipment.

Who Should Choose the E3SUPS40KHB1

The E3SUPS40KHB1 suits larger businesses, data centers, telecoms sites, and industrial facilities with three-phase supply that need substantial UPS capacity. It is especially valuable for organizations that have outgrown the smaller Easy UPS 3S models and want headroom for further expansion.

Final Thoughts on the E3SUPS40KHB1

As facilities scale, their power protection has to scale with them. The Schneider Electric E3SUPS40KHB1 combines 40kVA online protection, an internal-battery design, high efficiency, and the option to add units. For organizations that need higher-capacity, business-grade three-phase protection, it is a smart, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Easy UPS 3S 30kVA: Ultimate Power Protection

As IT and industrial loads grow, power protection has to scale with them. The Schneider Electric Easy UPS 3S E3SUPS30KHB1 delivers 30kVA of online three-phase protection at 400V in a 3:3 configuration. It uses internal batteries and suits demanding environments that need more capacity than a 20kVA unit.

Introducing the E3SUPS30KHB1

The E3SUPS30KHB1 is part of the Easy UPS 3S range, a high-efficiency three-phase family designed for data centers, server rooms, and electrical control systems in industrial settings. At 30kVA, it supports heavier loads than smaller models, so it fits businesses with substantial and growing power protection needs.

Three-Phase Configuration of the E3SUPS30KHB1

The 3:3 configuration accepts three-phase input and delivers three-phase output. That matches facilities already built around three-phase supply and gives balanced, efficient power for larger equipment loads. Online double-conversion technology conditions power continuously, so connected equipment is shielded from sags, surges, and frequency instability at all times.

Internal Battery Runtime on the E3SUPS30KHB1

The internal-battery design keeps the unit compact and saves the space an external battery cabinet would take. The listed runtime is about 9 minutes at full load. That is a window to start shutdown procedures, transfer to generator power, or ride through a short outage. Confirm the runtime for your actual load with your supplier.

High Efficiency and Lower Operating Costs: The E3SUPS30KHB1 Advantage

Easy UPS 3S units are built for high energy efficiency, which cuts running costs over the life of the system. For a three-phase UPS that runs continuously, even small efficiency gains matter. Less wasted energy also means less heat for your cooling system to remove.

Scalable Capacity with the E3SUPS30KHB1

Up to four Easy UPS 3S units can work together for more capacity or redundancy. You can start at 30kVA and expand later, so you protect your original investment as the facility grows.

Monitoring and Serviceability of the E3SUPS30KHB1

The unit supports local and remote monitoring through the Easy UPS 3S communication interfaces. Schneider Electric’s service team is available to help keep the UPS and its batteries in good condition. Installation, wiring, protections, and battery setup should be done by qualified personnel in line with Schneider Electric documentation.

400V Compatibility of the E3SUPS30KHB1

Built for 400V three-phase systems, the E3SUPS30KHB1 fits standard commercial and industrial electrical infrastructure. That reduces installation complexity and avoids extra voltage conversion equipment.

Who Should Choose the E3SUPS30KHB1

The E3SUPS30KHB1 suits mid-sized businesses, data centers, telecoms sites, retail, and light industry with three-phase supply that need substantial UPS capacity. It is especially valuable for organizations whose loads have outgrown 20kVA systems but don’t yet need a large enterprise UPS.

Final Thoughts on the E3SUPS30KHB1

As power demands increase, scalable, dependable three-phase protection matters more. The Schneider Electric E3SUPS30KHB1 combines 30kVA online protection, an internal-battery design, high efficiency, and the option to add units. For businesses that need higher-capacity, business-grade UPS protection, it is a smart, dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv Liebert EXS 40kVA: Ultimate Protection!

Mid-to-large facilities running dense, business-critical infrastructure need power protection that scales without an oversized footprint. The Vertiv Liebert EXS ITC401A0101A00A offers 40kVA of true double-conversion online protection in a 0-minute autonomy configuration. It’s built for facilities that integrate the UPS with external battery cabinets instead of relying on internal battery capacity alone.

Introducing the ITC401A0101A00A

The ITC401A0101A00A is a mid-tier model in Vertiv’s Liebert EXS series, an optimized and integrated three-phase UPS platform engineered for high-efficiency power protection. At 40kVA, it fits facilities with substantial needs that sit between smaller server room deployments and full enterprise-scale infrastructure. It delivers a large amount of active power within a compact footprint.

0-Minute Autonomy Configuration of the ITC401A0101A00A

Instead of shipping with a fixed internal battery bank, the ITC401A0101A00A is configured for 0-minute autonomy and designed to work with external battery cabinets or existing facility backup systems. Data centers and industrial sites can size runtime independently of the UPS chassis. They avoid spending space and money on internal batteries when a custom-scaled external solution suits their needs better.

Double-Conversion Efficiency Up to 96.2% in the ITC401A0101A00A

A standout strength of the ITC401A0101A00A is its double-conversion efficiency of up to 96.2%, strong for online UPS technology. ECO mode efficiency can reach up to 99%. Facilities get the full benefit of true online protection, continuous voltage regulation and zero transfer time, without the steep energy overhead older double-conversion designs carried.

Compact Design and Reduced Footprint: The ITC401A0101A00A

The Liebert EXS platform behind the ITC401A0101A00A is built around a compact design philosophy. It keeps the physical footprint small while still delivering serious active power. That matters where floor space carries real cost, because 40kVA of protection can go in without the disproportionate footprint older three-phase UPS systems often required.

Output Power Factor and Clean Power Delivery on the ITC401A0101A00A

The ITC401A0101A00A offers an output power factor of up to 1, so its full rated capacity becomes usable active power for connected equipment. Input current total harmonic distortion (THDi) correction delivers clean power to protected loads and limits the electrical noise the UPS sends back into the facility’s upstream power infrastructure.

Integrated Manual Bypass and Breaker Protection on the ITC401A0101A00A

Built-in safeguards include integrated manual bypass along with integrated input and output breakers and switches. These simplify maintenance and give facility teams a reliable way to handle fault conditions or service the unit without leaving connected equipment exposed.

Parallel Capability of the ITC401A0101A00A

With an integrated parallel load bus and synchronization port (LBS), the ITC401A0101A00A supports parallel configuration with additional compatible units. Facilities can add capacity or introduce genuine redundancy as they grow, which protects the long-term value of their initial Liebert EXS investment.

Who Should Choose the ITC401A0101A00A

The ITC401A0101A00A suits data centers, server rooms, and industrial facilities that need substantial 40kVA protection and the flexibility to design their own external battery runtime strategy. It’s especially valuable for organizations standardizing on external battery infrastructure or planning future parallel expansion.

Final Thoughts on the ITC401A0101A00A

For facilities that need serious mid-to-large-scale power protection without an oversized physical or energy footprint, the Vertiv Liebert EXS ITC401A0101A00A combines double-conversion reliability, high efficiency, and real runtime flexibility. Parallel capability, integrated bypass protection, and a scalable approach to battery infrastructure make it a smart choice for facilities investing in 40kVA three-phase power protection.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS VT 40kVA: Ultimate Power Shield!

When power protection needs to scale beyond rack-level UPS units, businesses turn to systems purpose-built for centralized, three-phase infrastructure. The APC Smart-UPS VT SUVTP40KH4B4S delivers exactly that, offering 40kVA/32kW of true online, three-phase power protection at 400V, backed by the reliability the Smart-UPS family has built over more than 10 million installed units worldwide.

Introducing the SUVTP40KH4B4S

The SUVTP40KH4B4S is a tower-form UPS built for small data centers, large retail stores, regional offices, and laboratory environments that require serious, centralized power protection. With a 40kVA capacity and 32kW output power, it’s designed to support substantial IT and facility loads from a single, unified system, backed by hardwired three-phase input and output connections built for permanent, professional installation.

Three-Phase Input and Output Configuration of the SUVTP40KH4B4S

Configured for three-phase input and output at 400V, the SUVTP40KH4B4S is engineered to integrate directly into commercial and industrial electrical infrastructure. Its output connections include hardwired 4-wire and 5-wire options along with screw terminals, offering flexibility for electricians and facility teams to configure the installation according to specific site requirements.

Dual-Mains Input and Automatic Bypass on the SUVTP40KH4B4S

A key architectural advantage of the SUVTP40KH4B4S is its dual-mains input capability paired with automatic bypass functionality. This design allows the system to draw from two separate utility feeds and automatically switch to bypass mode when necessary, improving overall system availability and reducing the risk of a single point of failure taking down protected equipment.

Scalable, Hot-Swappable Battery Runtime with the SUVTP40KH4B4S

The SUVTP40KH4B4S uses hot-swappable battery modules, allowing runtime to be extended without powering down the system for maintenance. At full load, the unit typically delivers around 5 to 7 minutes of backup runtime, extending to roughly 18 to 22 minutes at half load, giving facility teams a meaningful window to transition to generator power or execute controlled shutdown procedures during longer outages.

Remote Monitoring and Management of the SUVTP40KH4B4S

Through APC’s Network Management Card, the SUVTP40KH4B4S supports remote monitoring and management via Web and SNMP, including temperature monitoring for more complete visibility into operating conditions. This level of manageability is essential for data center and facility teams who need real-time insight into power status across critical three-phase infrastructure.

Serviceability and Parallel Capability of the SUVTP40KH4B4S

Designed with user-replaceable batteries and an internal maintenance bypass, the SUVTP40KH4B4S is built for straightforward long-term serviceability, reducing dependency on specialized technicians for routine battery maintenance. Its parallel capability also allows multiple units to be combined for increased capacity or redundancy, giving businesses a scalable path as their power protection needs grow.

Who Should Choose the SUVTP40KH4B4S

The SUVTP40KH4B4S is well suited for small data centers, large retail operations, regional offices, and laboratories that require dependable, centralized three-phase power protection at scale. It’s particularly valuable for organizations that want dual-mains resilience, remote manageability, and the option to expand capacity through parallel configuration.

Final Thoughts on the SUVTP40KH4B4S

For organizations that have outgrown rack-level UPS protection, the APC Smart-UPS VT SUVTP40KH4B4S offers a dependable, centralized solution built on proven three-phase technology. With dual-mains input, automatic bypass, hot-swappable batteries, and robust remote monitoring, it delivers the kind of enterprise-grade reliability that small data centers and critical facilities depend on. For businesses ready to invest in serious, scalable three-phase power protection, the SUVTP40KH4B4S is a strong and capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Easy UPS 3S 40kVA: Ultimate 15-Min Protection

As data centers, server rooms, and industrial facilities continue to expand, their power protection needs to grow right alongside them. The Schneider Electric E3SUPS40KHB1 answers this demand, delivering 40kVA of three-phase-in, three-phase-out protection at 400V, backed by internal batteries offering approximately 15 minutes of runtime, positioning it as a strong choice for larger, more demanding environments.

Introducing the E3SUPS40KHB1

The E3SUPS40KHB1 is part of the Easy UPS 3S series, built to deliver dependable three-phase power protection for facilities with substantial equipment loads. With a 40kVA capacity and 3:3 configuration, it’s designed to support larger server rooms, expanded rack deployments, and industrial control systems that require more power protection capacity than smaller UPS models can provide.

Three-Phase Power Delivery with the E3SUPS40KHB1

Operating on a 3:3 configuration, the E3SUPS40KHB1 accepts three-phase input and delivers three-phase output, aligning naturally with facilities built around three-phase electrical infrastructure. This configuration offers more balanced and efficient power distribution for larger loads compared to single-phase systems, making it well suited for businesses running extensive server or industrial equipment.

Internal Battery Runtime on the E3SUPS40KHB1

With internal batteries providing approximately 15 minutes of runtime at full load, the E3SUPS40KHB1 offers facility and IT teams a solid window to execute safe shutdown procedures, transition to generator power, or resolve short-duration outages. This built-in runtime provides meaningful protection without immediately requiring external battery cabinets for standard backup scenarios.

400V System Compatibility of the E3SUPS40KHB1

Engineered for 400V operation, the E3SUPS40KHB1 integrates smoothly with standard three-phase commercial and industrial power systems used across many regions. This compatibility simplifies deployment, helping businesses avoid the added cost and complexity of voltage conversion equipment during installation.

Meeting Higher Capacity Demands: The E3SUPS40KHB1 Advantage

At 40kVA, the E3SUPS40KHB1 sits above the 20kVA and 30kVA models in the Easy UPS 3S lineup, offering substantial headroom for businesses managing larger IT environments or more extensive industrial operations. This higher capacity allows organizations to protect a greater volume of equipment from a single unit, streamlining power protection infrastructure while supporting continued growth.

Dependable Protection for Expanding Operations: The E3SUPS40KHB1

For businesses managing larger data centers, manufacturing facilities, or critical infrastructure, the cost of unplanned downtime rises alongside the scale of operations. The E3SUPS40KHB1 is built to deliver reliable three-phase backup power, helping safeguard against costly outages, equipment damage, and operational disruptions that come with unexpected power loss.

Who Should Choose the E3SUPS40KHB1

The E3SUPS40KHB1 is well suited for larger businesses, data centers, and industrial facilities with three-phase electrical systems requiring significant UPS capacity. It’s particularly valuable for organizations that have outgrown smaller Easy UPS 3S models and need additional power protection headroom to support continued expansion.

Final Thoughts on the E3SUPS40KHB1

As facilities scale, their power protection strategy needs to scale with them, and the Schneider Electric E3SUPS40KHB1 is built to meet that challenge. With 40kVA of capacity, internal battery runtime, and reliable 400V three-phase operation, it offers larger environments a dependable, growth-ready UPS solution. For organizations seeking higher-capacity, business-grade three-phase protection, the E3SUPS40KHB1 is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv Liebert EXS 40kVA: Ultimate Protection

Mid-to-large facilities running dense, business-critical infrastructure need power protection that scales without demanding an oversized footprint. The Vertiv Liebert EXS ITC401A0101A00A delivers exactly that, offering 40kVA of true double-conversion online protection in a 0-minute autonomy configuration built for facilities that integrate the UPS with external battery cabinets rather than relying on internal battery capacity alone.

Introducing the ITC401A0101A00A

The ITC401A0101A00A is a mid-tier model in Vertiv’s Liebert EXS series, an optimized and integrated three-phase UPS platform engineered for high efficiency power protection. At 40kVA, it’s positioned for facilities with substantial power protection requirements that sit between smaller server room deployments and full enterprise-scale infrastructure, delivering the utmost active power possible within a genuinely compact footprint.

0-Minute Autonomy Configuration of the ITC401A0101A00A

Rather than shipping with a fixed internal battery bank, the ITC401A0101A00A’s 0-minute autonomy design is built to work with external battery cabinets or existing facility backup systems. This gives data centers and industrial facilities the freedom to size their actual runtime independently of the UPS chassis itself, avoiding wasted space and cost on internal batteries when a custom-scaled external solution better fits their operational needs.

Double-Conversion Efficiency Up to 96.2% in the ITC401A0101A00A

One of the standout strengths of the ITC401A0101A00A is its double conversion efficiency of up to 96.2%, a genuinely strong figure for online UPS technology. With ECO mode efficiency reaching up to 99%, the unit allows facilities to capture the full benefits of true online protection, continuous voltage regulation and zero transfer time, without absorbing the steep energy overhead that older double-conversion designs were known for.

Compact Design and Reduced Footprint: The ITC401A0101A00A

The Liebert EXS platform behind the ITC401A0101A00A is built around a compact design philosophy, reducing its physical footprint to a minimum while still delivering serious active power output. This space-conscious engineering matters for facilities where floor space carries real cost, allowing 40kVA of protection to be deployed without the disproportionate footprint older three-phase UPS systems often required.

Output Power Factor and Clean Power Delivery on the ITC401A0101A00A

The ITC401A0101A00A delivers an output power factor of up to 1, meaning the full rated capacity translates into genuinely usable active power for connected equipment. Combined with input current total harmonic distortion (THDi) correction, it ensures clean power delivery to protected loads while limiting the electrical noise the UPS itself introduces back into the facility’s power infrastructure.

Integrated Manual Bypass and Breaker Protection on the ITC401A0101A00A

Built-in operational safeguards on the ITC401A0101A00A include integrated manual bypass functionality along with integrated input and output breakers and switches. These features streamline maintenance and give facility teams a reliable way to manage fault conditions or service the unit without leaving connected equipment exposed during the process.

Parallel Capability of the ITC401A0101A00A

With an integrated parallel load bus and synchronization port (LBS), the ITC401A0101A00A supports parallel configuration with additional compatible units. This allows facilities to expand total capacity or introduce genuine redundancy as their infrastructure grows, protecting the long-term value of their initial Liebert EXS investment.

Who Should Choose the ITC401A0101A00A

The ITC401A0101A00A is well suited for data centers, server rooms, and industrial facilities that need substantial 40kVA power protection along with the flexibility to design their own external battery runtime strategy. It’s particularly valuable for organizations standardizing on external battery infrastructure or planning future parallel expansion.

Final Thoughts on the ITC401A0101A00A

For facilities that need serious mid-to-large-scale power protection without an oversized physical or energy footprint, the Vertiv Liebert EXS ITC401A0101A00A delivers a strong combination of double-conversion reliability, high efficiency, and true runtime flexibility. With parallel capability, integrated bypass protection, and a scalable approach to battery infrastructure, it stands out as a smart choice for facilities investing in dependable 40kVA three-phase power protection.

CONTACT US @ TIACO TECHNOLOGIES.