Extending Runtime Where It Counts: The Vertiv GXT5-EBC192VRT3U External Battery Cabinet

A UPS’s internal battery buys you a few minutes — enough for a controlled shutdown, but not always enough for a genuinely extended outage. The Vertiv Liebert GXT5-EBC192VRT3U was engineered specifically to close that gap, giving GXT5 5kVA through 10kVA UPS units a direct, purpose-matched path to real, meaningful extended runtime.

What the Vertiv GXT5-EBC192VRT3U Is Built For

The Vertiv Liebert GXT5-EBC192VRT3U is an external battery cabinet purpose-matched to the Vertiv Liebert GXT5 UPS family across its 5kVA, 6kVA, 8kVA, and 10kVA capacity variants. Continuous power conditioning, zero transfer time, pure sinewave output, and scalable runtime make the Liebert GXT5 UPS family ideally suited to protect critical infrastructure in both centralized and edge network applications — and the GXT5-EBC192VRT3U is the component that turns that scalable runtime promise into real, extended backup time.

Auto-Detection for Genuine Plug-and-Play Integration

One of the most practical features of the entire GXT5 ecosystem is how effortlessly the battery cabinet integrates. Setup and integration are easy, with auto-detection of matching external battery cabinets for additional runtime solutions — meaning once the GXT5-EBC192VRT3U is connected to a compatible GXT5 unit, the UPS automatically recognizes the additional battery capacity, without requiring manual configuration or specialized commissioning steps.

Precise Compatibility Across the GXT5 5-10kVA Range

The Vertiv GXT5-EBC192VRT3U is specifically matched as the external battery cabinet solution for the GXT5-5000IRT5UXLN, GXT5-6000IRT5UXLN, GXT5-8000IRT5UXLN, and GXT5-10KIRT5UXLN models — every unit in the GXT5 5-10kVA capacity tier. That precise, factory-matched compatibility means the battery cabinet’s voltage, physical form factor, and communication protocol are engineered to integrate seamlessly with any UPS in this range, rather than being a generic accessory adapted after the fact.

192V Architecture Built for Real Capacity

As reflected in its part number, the GXT5-EBC192VRT3U is built around a 192V battery architecture, matched precisely to the internal battery voltage of the GXT5 5-10kVA UPS family. That voltage alignment matters — it means the external cabinet integrates directly into the UPS’s existing battery management and charging system rather than requiring a separate, incompatible charging architecture.

Rack/Tower Flexibility to Match Your UPS Deployment

Because the GXT5 UPS family itself uses a convertible rack/tower design that offers installation flexibility, the matching GXT5-EBC192VRT3U battery cabinet is designed to complement that same deployment flexibility — whether your GXT5 unit is installed as a standalone tower or integrated into a standard rack, the external battery cabinet is built to sit alongside it in the same physical configuration.

Extending Runtime Without Replacing the UPS

The real value of the GXT5-EBC192VRT3U lies in what it avoids: a full UPS replacement. Rather than purchasing an entirely new, higher-capacity system to get longer backup time, facilities can simply add this external battery cabinet to their existing GXT5 5-10kVA unit, extending its runtime to match evolving requirements — a genuinely more cost-effective and less disruptive path to longer backup power.

Genuine Value for Growing Critical Infrastructure

For banking, healthcare, government, retail, and other environments where the GXT5 platform is already deployed, the ability to simply extend runtime through a matched external cabinet — rather than re-architecting the entire power protection strategy — is a significant practical advantage. As operational requirements grow or as an organization’s risk tolerance for extended outages tightens, the GXT5-EBC192VRT3U provides a direct, proven upgrade path.

Backed by Vertiv’s Broader Support Ecosystem

As part of the wider Liebert GXT5 UPS family, the GXT5-EBC192VRT3U benefits from the same manufacturer-backed reliability and service network behind Vertiv’s broader critical power infrastructure lineup — genuine assurance for a component that plays a direct role in how long your protected equipment can actually stay running during an outage.

The Bottom Line on the Vertiv GXT5-EBC192VRT3U

For any organization running a Vertiv Liebert GXT5 UPS in the 5kVA to 10kVA range, the GXT5-EBC192VRT3U delivers a direct, auto-detecting path to extended runtime — precisely matched voltage architecture, seamless integration with the existing UPS, and genuine flexibility across the full GXT5 5-10kVA lineup. It’s the straightforward way to turn a brief backup window into genuine, extended operational continuity, without replacing the UPS you already trust.

CONTACT US @ TIACO TECHNOLOGIES.

Trusted Protection for Business-Critical Systems: The Vertiv GXT5-5000IRT5UXLN

Banking, healthcare, government, and retail environments all share a common demand — power that simply cannot fail. The Vertiv Liebert GXT5-5000IRT5UXLN meets that demand directly, delivering true online double-conversion protection at 5kVA, purpose-built for exactly these mission-critical sectors.

What the Vertiv GXT5-5000IRT5UXLN Delivers

The Vertiv Liebert GXT5 uninterruptible power supply protects critical equipment against outages and every type of power disturbance. This 5kVA/5kW online double conversion UPS offers continuous power conditioning in centralized and edge locations. The Vertiv GXT5-5000IRT5UXLN is designed for banking, financial and insurance, education, government, healthcare, retail, and wholesale establishments — sectors where a single power failure can mean regulatory exposure, lost transactions, or genuinely serious operational disruption.

Unity Power Factor Behind the Vertiv GXT5-5000IRT5UXLN

With unity power factor (1.0), it allows more connected loads, saving space and costs. Designed for high availability and capacity, these compact UPS models with output power factors up to unity provide more usable power for connected equipment — meaning virtually all of the unit’s rated 5kVA/5kW capacity is genuinely usable output power, rather than headroom you’re paying for but can’t actually draw on.

Rack/Tower Flexibility of the Vertiv GXT5-5000IRT5UXLN

The full range of single-phase Vertiv Liebert GXT5 UPS systems are easy to deploy with convertible rack/tower design that offers installation flexibility, giving facilities teams real choice in how they integrate the unit into an existing server room or IT closet layout. Physical dimensions come in at 430 x 630 x 217mm, weighing approximately 70.8kg — genuinely compact hardware for the capacity it delivers.

The Gravity-Sensing LCD Interface

Its gravity-sensing, color LCD provides a user-friendly interface for local configuration and management — the display automatically reorients itself depending on whether the unit is deployed as a tower or mounted in a rack, ensuring the interface always reads correctly regardless of installation orientation, a genuinely thoughtful detail for a unit built around installation flexibility.

Power Quality and Input Specifications

The unit operates on a nominal 230VAC input voltage, with operating frequency configurable for 50 or 60Hz (factory default 50Hz), through hardwire input connections. Continuous power conditioning, zero transfer time, pure sinewave output, and scalable runtime make it ideally suited to protect critical infrastructure in both centralized and edge network applications — meaning connected equipment experiences no gap whatsoever when transitioning between utility and battery power.

Energy Star Efficiency

Energy Star 2.0 certification reflects high efficiency in online mode (95%) and Active ECO mode (98%) — genuine, independently verified efficiency credentials that translate directly into lower operating costs and reduced heat generation over the life of the unit, a meaningful factor for any facility running continuous double-conversion protection.

Scalable Runtime Through External Battery Cabinets

Setup and integration are also easy with auto-detection of matching external battery cabinets for additional runtime solutions. The GXT5-5000IRT5UXLN pairs directly with the GXT5-EBC192VRT3U external battery cabinet, giving facilities a genuine, purpose-matched path to extended runtime well beyond the unit’s internal battery capacity — without complicated manual configuration.

Network Management Built for Critical Infrastructure

With available network interface card (NIC), the Vertiv suite of management solutions including Trellis Power Insight and Vertiv LIFE Services are available to support your critical infrastructure. SNMP network communications with the Vertiv RDU101 NIC streamlines installation and maintenance, and this card comes factory pre-installed on 5-20kVA units — meaning network-based monitoring and management is ready from day one, not a separately sourced add-on.

Backed by a Real Warranty

The unit carries a three-year advanced replacement, full-coverage factory warranty, with optional extended warranty available — genuine, substantial assurance behind a UPS protecting genuinely critical infrastructure.

The Bottom Line on the Vertiv GXT5-5000IRT5UXLN

For banking, healthcare, government, education, and retail environments that need dependable, business-critical power protection, the Vertiv Liebert GXT5-5000IRT5UXLN delivers exactly that: true online double-conversion technology, unity power factor efficiency, flexible rack/tower deployment, and scalable runtime through matching external battery cabinets — all backed by Energy Star certification and a substantial factory warranty. It’s the kind of dependable, purpose-built protection that critical infrastructure sectors genuinely require.

CONTACT US @ TIACO TECHNOLOGIES.

Compact Three-Phase Protection for Essential IT Systems: The Liebert MTP 10kVA

Not every IT environment needs 15kVA or more of backup capacity — many small data rooms, IT closets, and branch offices need exactly what the Liebert MTP 10kVA delivers: genuine three-phase, double-conversion protection sized appropriately, with the flexibility to configure exactly how your facility’s infrastructure requires.

What the Liebert MTP 10kVA Delivers

The Liebert MTP is a reliable 3-phase online UPS for small to medium IT systems, delivering 10kVA of true double-conversion capacity for critical loads. As genuine online double-conversion technology, it continuously conditions and regulates output voltage, protecting connected servers, networking equipment, and other sensitive electronics from the full spectrum of power disturbances — not just outright outages, but the sags, surges, and quieter voltage instability that degrade equipment over time even without a dramatic event.

Configuration Flexibility of the Liebert MTP 10kVA

A defining feature of this unit is genuine adaptability in how it’s wired into your facility. It supports 3/3 or 3/1 configuration, meaning the same UPS can be set up for three-phase input with three-phase output, or three-phase input with single-phase output — matching directly to whatever electrical distribution your facility already uses, rather than forcing you into a single fixed topology.

A 0-Minute Autonomy Configuration

This particular configuration of the Liebert MTP 10kVA ships without integrated internal battery runtime, making it a purpose-built choice for facilities that already have an external battery cabinet, a separate DC power architecture, or generator backup in place. Rather than duplicating existing runtime infrastructure at the individual UPS level, this configuration lets you architect your facility’s overall power protection strategy exactly the way it’s actually needed — whether that means a dedicated external battery bank or a direct handoff to standby generation.

Battery Options Across the MTP Line

While this particular configuration ships with 0 minutes of internal autonomy, the broader Liebert MTP platform is built around genuinely flexible battery architecture — related configurations in the same family use VRLA internal batteries rated for a long design life, giving facilities that do want built-in runtime a dependable option to choose from as their requirements evolve over time.

Built for Small to Medium IT Environments

The Liebert MTP 10kVA is genuinely well-suited to the environments it’s engineered for — small data rooms, IT closets, VoIP infrastructure, branch storage, and similarly scaled critical loads where a full data-center-scale UPS would be unnecessary overbuild, but where real three-phase, double-conversion reliability is still a genuine requirement. It sits precisely at the intersection of “serious enough to matter” and “compact enough to fit.”

Double-Conversion Reliability at Its Core

At the heart of the Liebert MTP 10kVA is the same fundamental promise behind every true double-conversion UPS: continuous power conditioning rather than reactive correction. Incoming utility power is continuously converted and regenerated before reaching connected equipment, meaning your servers and networking gear experience zero transfer gap during a genuine outage, alongside consistently clean, regulated power during everyday operation.

Why Choose the 0MIN Autonomy Configuration

Selecting a 0-minute autonomy configuration isn’t a limitation — for the right facility, it’s the smarter architectural and financial choice. If your site already runs a robust external battery system, a UPS-ready generator, or a centralized DC power plant serving multiple connected loads, adding internal battery capacity to every individual UPS unit is both redundant and unnecessarily costly. The Liebert MTP 10kVA 0MIN configuration lets you deploy genuine double-conversion protection precisely where your existing runtime infrastructure already handles backup power.

Part of a Trusted, Established Platform

The Liebert MTP name carries the same design philosophy and manufacturing standards behind Vertiv’s broader Liebert product family — a genuinely established name in critical power infrastructure that data centers, IT closets, and branch offices worldwide have relied on for years.

The Bottom Line on the Liebert MTP 10kVA

For small to medium IT systems that need genuine 10kVA three-phase, double-conversion protection with real configuration flexibility, the Liebert MTP 10kVA (3/3 or 3/1) 0MIN Autonomy delivers exactly that — adaptable phase wiring, continuous power conditioning, and a battery-free design purpose-built for facilities that already have their runtime infrastructure in place. It’s precisely the kind of compact, right-sized power protection essential IT systems actually need.

CONTACT US @ TIACO TECHNOLOGIES.

Flexible Three-Phase Protection for Growing IT Systems: The Liebert MTP 15kVA

Small to medium IT systems often need genuine three-phase reliability without the complexity of a much larger installation. The Liebert MTP 15kVA (3/3 or 3/1), 0MIN Autonomy answers that need directly — a true double-conversion online UPS engineered for flexibility in both configuration and battery architecture.

What the Liebert MTP 15kVA Delivers

The Liebert MTP is a reliable 3-phase online UPS for small to medium IT systems, delivering 15kVA of double-conversion capacity for critical loads. As true online double-conversion technology, it continuously conditions and regulates output voltage, protecting connected servers, networking equipment, and other sensitive electronics from the full range of power disturbances — not just outright outages, but sags, surges, and the quieter voltage instability that degrades equipment over time.

Configuration Flexibility of the Liebert MTP 15kVA

One of the standout features of this unit is genuine configuration flexibility. It supports 3/3 or 3/1 configuration, meaning the same UPS can be set up for three-phase input with three-phase output, or three-phase input with single-phase output — adapting directly to whatever electrical distribution your facility actually uses, rather than locking you into a single fixed topology at the time of purchase.

A 0-Minute Autonomy Configuration

This particular configuration of the Liebert MTP 15kVA ships without integrated internal battery runtime — a purpose-built choice for facilities that already have an external battery cabinet, a separate DC power architecture, or generator backup in place. Rather than paying for internal battery capacity that duplicates existing infrastructure, this configuration lets you architect your facility’s actual runtime strategy exactly the way it’s needed, whether that means a dedicated external battery bank or a direct handoff to standby generation.

Battery Architecture Across the MTP Line

While this configuration ships with 0 minutes of internal autonomy, the broader Liebert MTP 15kVA platform is built around genuinely flexible battery options — other configurations in the same family use 1x32x9Ah VRLA internal batteries rated for a 10-year design life, giving facilities that do want internal runtime a dependable, long-life battery option to choose from as their requirements evolve.

Built for Small to Medium IT Environments

The Liebert MTP 15kVA is genuinely well-matched to the environments it’s designed for — small data rooms, IT closets, branch offices, and similarly scaled critical infrastructure where a full-size data center UPS would be overkill, but where genuine three-phase, double-conversion reliability is still a real requirement. It’s positioned specifically to bridge the gap between smaller single-phase UPS units and much larger enterprise-scale systems.

Double-Conversion Reliability at Its Core

At the heart of the Liebert MTP 15kVA is the same core promise as every true double-conversion UPS: continuous power conditioning, not reactive correction. Incoming utility power is continuously converted and regenerated before reaching connected equipment, meaning your servers and networking gear experience zero transfer gap during a genuine outage, and consistently clean, regulated power during normal operation.

Why Facilities Choose the 0MIN Autonomy Configuration

Choosing a 0-minute autonomy configuration isn’t a compromise — for many facilities, it’s the more cost-efficient and architecturally sound choice. If your site already has a robust external battery system, a UPS-ready generator, or a centralized DC power plant serving multiple loads, adding internal battery capacity to every individual UPS is redundant and unnecessarily expensive. The Liebert MTP 15kVA 0MIN configuration lets you deploy genuine double-conversion protection precisely where your existing runtime infrastructure already covers the backup power requirement.

Part of a Trusted, Established Platform

The Liebert MTP name reflects Vertiv’s broader reputation in critical power infrastructure — the kind of dependable, proven engineering that data centers, IT closets, and branch offices rely on worldwide. As part of a well-established three-phase UPS platform, the MTP 15kVA benefits from the same design philosophy and manufacturing standards behind Vertiv’s wider Liebert product family.

The Bottom Line on the Liebert MTP 15kVA

For small to medium IT systems that need genuine 15kVA three-phase, double-conversion protection with real configuration flexibility, the Liebert MTP 15kVA (3/3 or 3/1) 0MIN Autonomy delivers exactly that — adaptable phase configuration, continuous power conditioning, and a battery-free design built for facilities that already have their runtime infrastructure in place. It’s precisely the kind of flexible, right-sized power protection growing IT environments actually need.

CONTACT US @ TIACO TECHNOLOGIES.

Balanced Capacity, Maximum Efficiency: The Vertiv ITC301A0101A00A

Between smaller edge deployments and full-scale data center infrastructure sits a genuinely important capacity tier — facilities large enough to need real three-phase protection, but not yet at the scale of a massive centralized UPS system. The Vertiv Liebert EXS ITC301A0101A00A occupies that space precisely, delivering 30kVA of double-conversion protection in the same compact, transformer-free design that defines the EXS line.

What the Vertiv ITC301A0101A00A Delivers

Liebert EXS combines compact design and improved performances. It is able to provide the utmost active power possible in a compact footprint. In fact, its improved design reduces its footprint to a minimum and enhances its double conversion efficiency up to 96.2%, providing continuous power protection with optimised internal runtime in a standalone solution. At 30kVA, the ITC301A0101A00A delivers substantial three-phase capacity for data centers, server rooms, and commercial facilities that need genuinely serious power protection without committing to a much larger, higher-cost system.

Efficiency Behind the Vertiv ITC301A0101A00A

Double conversion efficiency reaches up to 96.2%, with ECO mode efficiency climbing as high as 99% — figures that translate directly into real operating savings over the life of the unit. The unit also maintains a unity output power factor, meaning nearly all of its rated 30kVA capacity is delivered as genuinely usable output power, rather than headroom you’re paying for but can’t actually draw on.

A 0-Minute Autonomy Configuration

This particular ITC301A0101A00A configuration ships with 0 minutes of integrated battery autonomy — purpose-built for facilities that already have an external battery cabinet, dedicated DC power infrastructure, or generator backup in place. Rather than duplicating existing runtime infrastructure, this configuration lets you architect your facility’s power protection strategy exactly the way it actually needs to be built, without paying for internal battery capacity that goes unused.

Reduced Total Cost of Ownership

The Liebert EXS platform is built around a comprehensive set of cost- and space-saving engineering principles: reduced total cost of ownership, a compact footprint, multiple internal runtime configurations, high power density, installation flexibility, integrated maintenance bypass, and integrated input and output power distribution. Dual mains input is also included, giving the unit genuine redundancy by allowing it to draw from two separate power sources.

Integrated Maintenance Bypass

Critical infrastructure still needs periodic servicing, and the ITC301A0101A00A is engineered so that maintenance never introduces downtime. Its integrated maintenance bypass ensures connected critical loads keep operating even during scheduled service work — a genuinely important safeguard for facilities where any interruption, planned or otherwise, carries real operational cost.

Parallel Capability for Scaling Beyond a Single Unit

The Vertiv ITC301A0101A00A isn’t a fixed capacity ceiling. Liebert EXS can be connected with up to four units in parallel, and a single unit can be upgraded to parallel operation via easy to modify software settings — a genuine, cost-effective path to expanding total capacity or adding real redundancy as an organization’s infrastructure needs grow, without requiring a complete system replacement.

Flexible Battery and Installation Architecture

Common or distributed battery bank configurations, along with internal and external battery options, give facilities teams real flexibility in how they build out their overall runtime and redundancy strategy around the unit. Combined with genuinely flexible installation, the ITC301A0101A00A adapts to a wide range of data center and enterprise environment layouts rather than forcing a single rigid deployment approach.

Backed by Global Vertiv Support

Vertiv offers a complete range of services specifically designed for three-phase UPS systems, with coverage options extending up to 5 years and backed by a global service network spanning more than 270 service centers and 2,700 field engineers in over 130 countries — genuine, dependable support behind a UPS playing a central role in your facility’s power protection strategy.

The Bottom Line on the Vertiv ITC301A0101A00A

For data centers, server rooms, and commercial facilities that need genuine 30kVA three-phase, double-conversion protection without stepping up to a much larger system, the Vertiv Liebert EXS ITC301A0101A00A delivers real efficiency up to 96.2%, integrated maintenance bypass, dual mains input, and parallel scalability up to four units — all in a 0-minute autonomy configuration built for facilities with their battery and generator architecture already in place. It’s compact, high-efficiency power protection sized precisely for the businesses that need serious continuity without unnecessary overbuild.

CONTACT US @ TIACO TECHNOLOGIES.

Right-Sized, High-Efficiency Protection: The Vertiv ITC401A0101A00A

At 40kVA, a UPS is protecting real, substantial infrastructure — data center racks, large server rooms, and demanding commercial equipment loads. The Vertiv Liebert EXS ITC401A0101A00A delivers that level of protection while staying true to the EXS line’s defining trait: genuinely compact, transformer-free design that doesn’t sacrifice efficiency for footprint.

What the Vertiv ITC401A0101A00A Delivers

Liebert EXS combines compact design and improved performances. It is able to provide the utmost active power possible in a compact footprint. In fact, its improved design reduces its footprint to a minimum and enhances its double conversion efficiency up to 96.2%, providing continuous power protection with optimised internal runtime in a standalone solution. At 40kVA, the unit delivers substantial three-phase capacity built specifically for data centers, large server rooms, and commercial facilities.

Efficiency Behind the Vertiv ITC401A0101A00A

Double conversion efficiency reaches up to 96.2%, with ECO mode efficiency climbing as high as 99% — genuinely leading-edge figures for a UPS at this capacity tier. High efficiency operation reduces energy costs and heat, meaning the ITC401A0101A00A doesn’t just protect your equipment, it does so while meaningfully lowering the operating cost and cooling burden that comes with running 40kVA of continuous power conversion.

A 0-Minute Autonomy Configuration

This particular ITC401A0101A00A configuration ships with 0 minutes of integrated battery autonomy — engineered specifically for facilities that already have an external battery cabinet, dedicated DC power infrastructure, or generator backup in place. Rather than paying for internal battery capacity that duplicates existing infrastructure, this configuration lets you architect your runtime strategy exactly the way your facility’s actual power protection plan requires.

Reduced Total Cost of Ownership

The Liebert EXS platform is built around a genuinely comprehensive set of cost- and space-saving design principles: reduced total cost of ownership, a compact footprint, multiple internal runtime configurations, high power density, installation flexibility, integrated maintenance bypass, and integrated input and output power distribution. Dual mains input is also included, giving the unit the ability to draw from two separate power sources for genuine redundancy at this critical capacity tier.

Integrated Maintenance Bypass Keeps Loads Running

Even mission-critical infrastructure needs periodic service, and the ITC401A0101A00A is designed so that maintenance never becomes a source of downtime. Its integrated maintenance bypass ensures connected critical loads keep operating even during scheduled service work — a genuinely important feature for data centers and server rooms where any unplanned interruption carries real cost.

Parallel Capability for Growing Infrastructure

Parallel capability for capacity and redundancy means the Vertiv ITC401A0101A00A isn’t a fixed ceiling on your infrastructure’s power protection. Liebert EXS can be connected with up to four units in parallel, and a single unit can be upgraded to parallel operation via easy to modify software settings — a genuine, cost-effective path to scaling total capacity or adding real redundancy as your organization’s requirements grow, without a full infrastructure overhaul.

Advanced Diagnostics and Monitoring

Advanced diagnostics help monitor UPS health and status, giving IT and facilities teams genuine visibility into the unit’s condition rather than waiting for a failure to reveal a developing problem. That kind of proactive insight matters enormously for infrastructure supporting data centers and enterprise environments, where catching a degrading component early can prevent a much larger, costlier failure down the line.

Flexible Installation for Enterprise Environments

Flexible installation makes the ITC401A0101A00A suitable for data centers and enterprise environments of varying layouts, while common or distributed battery bank configurations and internal or external battery options give facilities teams real flexibility in how they architect their overall runtime and redundancy strategy around the unit.

Backed by Global Vertiv Support

Vertiv offers a complete range of services specifically designed for three-phase UPS systems, with coverage options extending up to 5 years and backed by a global network spanning more than 270 service centers and 2,700 field engineers across more than 130 countries — genuine, dependable support behind a UPS this central to your infrastructure.

The Bottom Line on the Vertiv ITC401A0101A00A

For data centers, large server rooms, and commercial facilities running genuinely substantial 40kVA loads, the Vertiv Liebert EXS ITC401A0101A00A delivers real double-conversion efficiency up to 96.2%, integrated maintenance bypass, dual mains input, and parallel scalability up to four units — all in a 0-minute autonomy configuration built for facilities with their battery and generator architecture already planned. It’s compact, high-efficiency power protection engineered for the infrastructure that genuinely can’t afford compromise.

CONTACT US @ TIACO TECHNOLOGIES.

Compact Power for the Largest Demanding Loads: The Vertiv ITC601A0101A00A

At 60kVA, a UPS is anchoring genuinely serious infrastructure — the kind of load where inefficiency and wasted floor space have real, measurable costs. The Vertiv Liebert EXS ITC601A0101A00A brings the same transformer-free, high-efficiency engineering found in the smaller EXS models up to this substantial capacity, without sacrificing the compact footprint the line is known for.

What the Vertiv ITC601A0101A00A Delivers

Liebert EXS combines compact design and improved performances. It is able to provide the utmost active power possible in a compact footprint. In fact, its improved design reduces its footprint to a minimum and enhances its double conversion efficiency up to 96.2%, providing continuous power protection with optimised internal runtime in a standalone solution. The new Liebert EXS is a monolithic transformer-free UPS which brings exceptional features for mission-critical applications, delivering a full 60kVA / 60,000W of double-conversion capacity.

Efficiency Behind the Vertiv ITC601A0101A00A

Efficiency at this scale translates directly into meaningful operating savings. Double conversion efficiency reaches up to 96.2%, with ECO mode efficiency climbing as high as 99% — genuinely industry-leading figures that reduce both total cost of ownership and environmental impact. The unit also maintains a unity output power factor, meaning virtually all of its rated capacity is delivered as usable output power rather than headroom you’re paying for but can’t actually draw on.

A 0-Minute Autonomy Configuration

This particular ITC601A0101A00A configuration ships with 0 minutes of integrated battery autonomy — a purpose-built choice for facilities that already have a dedicated external battery cabinet, a separate DC power architecture, or generator-backed infrastructure where internal battery runtime isn’t the priority. That flexibility means you’re not paying for internal battery capacity you don’t need, and you retain full control over how your facility’s specific runtime strategy is architected.

Design Features That Reduce Installation Complexity

The Liebert EXS line brings a genuinely comprehensive set of installation-friendly features to the 60kVA tier: reduced total cost of ownership, a compact footprint, multiple internal runtime configurations, high power density, installation flexibility, integrated maintenance bypass, and integrated input and output power distribution. Dual mains input is also included, giving the unit the ability to draw from two separate power sources — a genuinely important redundancy feature for infrastructure this critical.

Integrated Maintenance Bypass

A UPS this central to operations still needs to be serviced occasionally, and the Liebert EXS is designed around that reality. Its integrated maintenance bypass ensures connected critical loads keep operating even during scheduled service work — meaning routine maintenance never has to become a source of the very downtime the UPS exists to prevent.

Parallel Capability for Scaling Beyond a Single Unit

Single and three phase output configurations are supported up to 60kVA, and integrated parallel capability up to 4 units gives facilities a genuine path to scaling capacity or adding redundancy well beyond what a single unit provides. Liebert EXS can be connected with up to four units in parallel, and a single unit can be upgraded to parallel operation via easy to modify software settings — meaning your infrastructure decisions today don’t lock you into a fixed capacity ceiling as your organization’s needs grow.

Flexible Battery Architecture

Common or distributed battery bank configurations are supported, along with internal and external battery configurations for optimized back up time management — genuine flexibility that lets facilities teams tailor the runtime strategy precisely to their actual operational requirements rather than accepting a single fixed approach.

Built for Real-World Mobility and Installation

Casters for easy UPS repositioning are included, a small but genuinely practical touch for facilities that may need to reposition a unit this substantial during installation or later infrastructure changes without specialized heavy equipment.

Certified and Backed by Global Support

The Liebert EXS line meets recognized international standards, and Vertiv backs its three-phase UPS systems with a comprehensive range of service options, including coverage extending up to 5 years, supported by a global network of service centers and field engineers spanning more than 130 countries.

The Bottom Line on the Vertiv ITC601A0101A00A

For data centers, industrial facilities, and mission-critical operations running genuinely substantial 60kVA loads, the Vertiv Liebert EXS ITC601A0101A00A delivers real double-conversion efficiency up to 96.2%, a compact transformer-free footprint, integrated maintenance bypass, and parallel scalability up to four units — all in a 0-minute autonomy configuration built for facilities that already have their battery and generator architecture planned out. It’s serious, space-efficient power protection engineered for the infrastructure that genuinely can’t afford compromise.

CONTACT US @ TIACO TECHNOLOGIES.

Zero Transfer Time, Maximum Usable Power: The Vertiv GXT5-10KIRT5UXLN

Mission-critical equipment needs power that’s not just backed up, but continuously conditioned — no gaps, no delays, no compromises. The Vertiv Liebert GXT5-10KIRT5UXLN delivers exactly that: a genuine 10kVA online double-conversion UPS built for centralized and edge IT environments that simply can’t afford disruption.

What the Vertiv GXT5-10KIRT5UXLN Delivers

The Vertiv Liebert GXT5 uninterruptible power supply protects critical equipment against outages and every type of power disturbance. This 10kVA/10kW online double conversion UPS offers continuous power conditioning in centralized and edge locations. It’s an online double-conversion UPS designed to protect mission-critical systems from power interruptions and disturbances, delivering reliable, easy-to-manage power protection and battery backup with 10kVA (10kW) capacity.

Unity Power Factor Behind the Vertiv GXT5-10KIRT5UXLN

One of the standout engineering features of this unit is its unity power factor. With unity power factor (1.0), it allows more connected loads, saving space and costs. Featuring unity power factor (1.0), this 5U rack/tower convertible UPS ensures maximum usable power and efficiency — meaning virtually all of the unit’s rated 10kVA/10kW capacity is genuinely usable output power, rather than capacity you’re paying for but can’t actually draw on.

Rack/Tower Flexibility of the Vertiv GXT5-10KIRT5UXLN

The unit is genuinely adaptable to different installation environments. As a rack/tower convertible (5U) form factor, it fits comfortably into a standard rack or operates as a standalone tower unit, giving facilities teams real flexibility in how they integrate it into an existing server room or data center layout, rather than committing to a single physical configuration at the time of purchase.

Input and Output Specifications

The unit operates on a nominal input voltage of 230V AC, with a real-world tolerance range of 176 to 288V — genuine resilience against unstable grid conditions. Output voltage covers 200/208/220/230/240V AC, giving it flexibility across a range of regional power standards, and input frequency accepts a wide 40 to 70Hz range. Physically, it measures 5.1 inches high, 16.9 inches wide, and 19.7 inches deep, a genuinely compact footprint for the capacity it delivers.

Zero Transfer Time and Scalable Runtime

Because it’s true online double-conversion technology, the Vertiv GXT5-10KIRT5UXLN delivers zero transfer time — connected equipment never experiences even a momentary gap when switching between utility and battery power. And this 230V in/230V out single-phase UPS has scalable runtime options with matching external battery cabinets to give extra runtime during an outage to support critical equipment, meaning your backup time isn’t locked to the internal battery alone.

Remote Management Built In

It comes with a built-in Vertiv RDU101 SNMP card for remote monitoring and a full-color LCD interface for intuitive local management. The RDU101, Vertiv’s Liebert Intellislot web card, supports SNMP and web-based management along with compatibility for optional environmental sensors — meaning the GXT5-10KIRT5UXLN is ready for genuine network-based oversight straight out of the box, not as a separately purchased add-on.

Software-Based Graceful Shutdown

With the free Vertiv Power Insight software, the unit supports graceful shutdown of connected computers when the UPS battery backup experiences a threatening condition, notifying users of an event, displaying key metrics, and logging historical data — ensuring that if utility power stays down past available runtime, connected systems shut down cleanly rather than losing power abruptly.

Genuine Efficiency Certification

The GXT5-10KIRT5UXLN carries ENERGY STAR 2.0 certification, real, independently verified assurance of efficiency rather than just a manufacturer’s claim — a meaningful factor in both operating cost and environmental impact over the life of the unit.

Backed by Real Warranty Coverage

This model includes a 5-year total warranty (3 years standard plus 2 years extended) — a substantial commitment that reflects genuine confidence in the unit’s long-term reliability, well beyond what many competing UPS units offer at this capacity.

Who Should Be Running the Vertiv GXT5-10KIRT5UXLN

The GXT5 is ideal for IT networks, edge computing, healthcare, and financial institutions — sectors where continuous, clean power isn’t a convenience but a genuine operational requirement, and where even a momentary gap in power quality can have real consequences.

The Bottom Line on the Vertiv GXT5-10KIRT5UXLN

For IT networks, edge computing sites, healthcare facilities, and financial institutions that need genuine 10kVA double-conversion protection, the Vertiv GXT5-10KIRT5UXLN delivers real unity power factor efficiency, zero transfer time, rack/tower flexibility, built-in SNMP management, and scalable runtime through external battery cabinets — all backed by a substantial 5-year warranty. It’s the kind of dependable, ENERGY STAR-certified protection that centralized and edge infrastructure alike can genuinely be built around.

CONTACT US @ TIACO TECHNOLOGIES.

Compact, Efficient Three-Phase Protection: The Vertiv Liebert EXS ITC201A0100A00A

Not every critical facility needs a sprawling UPS installation — many simply need genuine three-phase, double-conversion reliability in the smallest footprint possible. The Vertiv Liebert EXS 20kVA (ITC201A0100A00A) delivers exactly that: a transformer-free, high-efficiency UPS built to protect mission-critical loads without demanding excessive installation space.

What the Vertiv ITC201A0100A00A Delivers

The Liebert EXS is a transformer-free UPS that offers exceptional features for mission-critical applications. With an extraordinary double conversion efficiency of up to 96.2%, the Liebert EXS ensures remarkable operational cost savings, reducing both the Total Cost of Ownership (TCO) and environmental impact. With less energy wasted as heat, you can be confident you’re getting the most out of your power source, reducing environmental impact and saving money on energy bills. At the 20kVA rating, the unit delivers a maximum active power of 20kW, giving genuine three-phase capacity for real critical infrastructure.

Efficiency Behind the Vertiv ITC201A0100A00A

Efficiency is where this unit genuinely stands out. Beyond its 96.2% double-conversion efficiency, the Liebert EXS reaches ECO mode efficiency of up to 99% — meaning the vast majority of incoming power reaches your equipment usefully, with minimal loss as heat. The unit also maintains a unity output power factor and high power density, which provides the highest possible active power in a compact design and standalone unit, meaning reliable, powerful protection without sacrificing valuable floor space.

Power Quality and Input Tolerance

The unit accepts a nominal input voltage of 380/400/415V (three-phase + N + PE), with an input voltage range without battery discharge extending from 173 to 498V — real tolerance for grid instability rather than a narrow, idealized operating window. Input frequency range runs 40 to 70Hz, and current THD at full linear load stays at or below 3%, while output voltage THD at full linear load holds to just 2% — genuinely clean power that protects sensitive equipment from the subtle stress of dirty power.

A 0-Minute Autonomy Configuration

This particular ITC201A0100A00A configuration ships with 0 minutes of integrated battery autonomy, making it a purpose-built choice for facilities that already have an external battery cabinet, a separate DC power source, or a generator-backed installation where internal battery runtime isn’t the priority. That flexibility matters — rather than paying for internal battery capacity you don’t need, this configuration lets you architect your runtime strategy exactly the way your facility requires it.

Output Configuration Flexibility

Liebert EXS models up to 20 kVA can be configured on-site to deliver three (3/3) or single (3/1) phase output, giving it the flexibility to adapt to changes in installation environments — a genuinely useful feature for facilities whose electrical requirements might shift after initial installation.

Overload Handling and Real-World Resilience

The unit is built to handle genuine overload events without flinching: inverter overload capacity reaches 105% for 60 minutes, 125% for 5 minutes, 150% for 1 minute, and over 150% for a minimum of 200 milliseconds — comprehensive protection against transient load spikes that would trip a less capable UPS.

Parallel Capability for Growing Facilities

Liebert EXS can be connected with up to four units in parallel, and a single unit can be upgraded to parallel operation via easy to modify software settings, allowing the system to be customized for the requested configuration. The loop parallel connection used in paralleling the system delivers ultimate reliability and eliminates the possibility of a single point of failure, ensuring perfect load sharing and fast detection of any variation in the system status — a genuine path to scaling capacity or adding redundancy well beyond a single unit.

Communication and Building Management Integration

The Liebert EXS features a multi-lingual LCD user interface allowing close control and monitoring of system status and performance, and offers communication features including voltage-free contacts and Intellislot for SNMP, BacNet, and Modbus — making the Vertiv ITC201A0100A00A compatible with any building management system your facility already relies on.

Where the Vertiv ITC201A0100A00A Fits

These benefits make the Liebert EXS ideal for a wide range of mission-critical applications, including IT installations, transportation, emergency lighting, healthcare, retail, and government facilities. It’s also worth noting that Liebert EXS can be used for Central Power Supply System (CPSS) applications as defined in the EN 50171 standard, capable of supplying emergency power to essential safety equipment such as emergency escape lighting and automatic fire extinguishing installations.

Backed by Real Global Support

Vertiv offers a complete range of services specifically designed for three-phase UPS systems, with coverage options guaranteeing up to 5-year protection to meet any customer need, backed by a global network of over 270 service centers and 2,700 field engineers.

The Bottom Line on the Vertiv ITC201A0100A00A

For IT installations, healthcare facilities, and mission-critical operations that need genuine three-phase, double-conversion protection in a compact, transformer-free design, the Vertiv Liebert EXS ITC201A0100A00A delivers real efficiency, flexible output configuration, robust overload handling, and parallel scalability up to four units — all backed by Vertiv’s extensive global service network. For facilities pairing this unit with an external battery system or generator backup, this 0-minute autonomy configuration offers exactly the right-sized, cost-efficient starting point.

CONTACT US @ TIACO TECHNOLOGIES.

Powering What Can’t Go Down: The APC SRTG20KXLI

There’s a difference between protecting a laptop from a power blip and protecting the infrastructure an entire business runs on. Servers, blade racks, medical lab equipment, and voice/data networks don’t get the luxury of “mostly reliable” power. That’s the exact job the APC SRTG20KXLI was built to do.

Double-Conversion Technology in the APC SRTG20KXLI

Most UPS units — even good ones — only step in after they detect a problem. The SRTG20KXLI works differently. It delivers online double-conversion power with a pure sine wave output, meaning incoming utility power is continuously converted to DC and back to clean AC before it ever reaches your equipment. There’s no gap, no switchover delay, no moment where your servers are exposed. The UPS provides protection for electronic equipment against blackouts, brownouts, sags, surges, small utility power fluctuations, and larger disturbances alike, and it does this continuously rather than reactively.

Who the APC SRTG20KXLI Is Built For

This is the tier of protection used in environments where downtime isn’t an inconvenience, it’s a liability. It’s built for servers, storage systems, voice and data networks, medical labs, and light industrial applications, and is part of a Smart-UPS On-Line family that scales from 1kVA all the way up to 20kVA, with the 15 and 20kVA tiers specifically added to support power-hungry blade servers and heavily loaded equipment racks.

APC SRTG20KXLI Capacity and Efficiency

At 20kVA/20kW, this unit is designed for real infrastructure, not a single desktop. It maintains a unity output power factor, delivers online efficiency above 93.5% at full load, and can push green-mode efficiency above 98% — meaning less wasted energy, lower cooling demands, and a smaller electricity bill even while running at full capacity. That high output power factor means more of the UPS’s rated capacity is delivered as usable, real output power, so you’re not paying for headroom you can’t actually use.

Rack/Tower and Voltage Flexibility of the APC SRTG20KXLI

Flexibility runs through the entire design. It’s a rack/tower convertible unit, protecting your initial investment when migrating from a tower setup to a rack-mounted environment, and it accepts a wide range of power configurations — handling three-phase input at 380–415V as well as single-phase 230V, with an input voltage range at full load of 160–285VAC that gives it real tolerance for imperfect grid conditions, which matters enormously in regions where utility power isn’t always stable.

Scalable Runtime for the APC SRTG20KXLI

A UPS is only as useful as the time it buys you, and the SRTG20KXLI is built to scale. You can add up to four external battery packs to extend runtime well beyond the base unit’s capacity, and plug-and-play external batteries ensure clean, uninterrupted power to your loads even as you add that extra runtime. Whether you need a few extra minutes to gracefully shut down a rack of servers or enough runtime to bridge a longer outage while a generator spins up, this system is designed to grow with your requirements instead of forcing a replacement.

Monitoring and Management on the APC SRTG20KXLI

Big UPS hardware means nothing if you can’t see what it’s doing. The SRTG20KXLI comes ready for serious oversight: it features a multi-color LCD display that provides detailed, accurate information and the ability to configure the unit locally, plus a pre-installed Network Management Card that lets you monitor and manage the UPS — and even control groups of receptacles — remotely over the network.

Predictive Maintenance Built Into the APC SRTG20KXLI

It also thinks ahead. Automatic self-test performs periodic battery checks for early detection of a battery that needs replacing, while predictive failure notification delivers early-warning fault analysis so components can be replaced proactively, before they actually fail. Audible alarms keep you informed of changing utility power and UPS conditions in real time, and flash-upgradeable firmware lets you install maintenance updates remotely via FTP — no need to take the system offline or send someone to physically touch it.

The Bottom Line on the APC SRTG20KXLI

A 20kVA online UPS is not a small purchase, and it’s not meant to be — it’s meant to sit at the center of your power infrastructure and simply never fail. It’s engineered for the IT professionals and network administrators who are responsible for keeping business operations continuously running, and every feature — from double-conversion topology to predictive failure alerts — exists to take that responsibility off your shoulders. If your business depends on servers, networking equipment, or medical or industrial hardware that genuinely cannot afford to go down, the APC SRTG20KXLI isn’t an optional upgrade. It’s the foundation everything else stands on.

CONTACT US @ TIACO TECHNOLOGIES.