Powerful APC AP7922B: Ultimate Rack Power Control

As IT environments grow, simply distributing power to a rack is no longer enough. Teams need visibility and control at every outlet. The APC AP7922B is a switched rack PDU with 32A input, 230V rating, and sixteen C13 outlets in a 2U chassis. It is built for serious data center and server room racks.

Introducing the AP7922B

The AP7922B distributes and manages power for rack-mounted servers, switches, and other equipment from one unit. It feeds sixteen IEC 60320 C13 outlets from a single IEC 60309 32A input with a 3.05 m cord. It supports a load capacity of up to 7360VA. That suits mid-sized data centers, server rooms, and colocation racks that need reliable, manageable power distribution.

Switched Outlet Control on the AP7922B

Unlike a basic PDU, the AP7922B lets you switch individual outlets on and off remotely. Administrators can power-cycle a hung server, sequence startups to avoid inrush current, or turn off equipment that isn’t needed. Nobody has to visit the rack. That saves time and shortens outages, especially at remote or unstaffed sites.

Network Management and Monitoring on the AP7922B

The AP7922B has a 10/100 Ethernet connection for network management. It also provides metering, so administrators can see current and load levels across the rack. This visibility helps with capacity planning and with spotting overloaded circuits before they trip a breaker.

Space-Efficient 2U Design of the AP7922B

Rack space is valuable, and the AP7922B takes only 2U. It measures about 44.5 x 8.9 x 11.4 cm and weighs 4.5kg, and it mounts horizontally at the front or rear of the rack with the included brackets. Intelligent power distribution fits without giving up room for servers or networking gear.

High-Capacity Outlet Configuration of the AP7922B

Sixteen C13 outlets on a 32A circuit handle the demands of a densely populated rack. A single unit can replace several smaller PDUs, which simplifies cable management and centralizes control. The C13 outlets suit the majority of servers, switches, and appliances that use standard C14 power cords.

Installation Requirements for the AP7922B

The AP7922B has an IEC 60309 32A input and needs a matching single-phase 32A supply at the rack. It accepts a nominal 200V to 240V input and operates from 0 to 45°C. Before installation, confirm your branch circuit rating and balance the load across outlets so total current stays within 32A.

Warranty and Reliability of the AP7922B

The AP7922B is covered by a 2-year repair-or-replace warranty. It meets standard EMC requirements and carries CE and VDE certifications, so it is suitable for professional deployments.

Who Should Choose the AP7922B

The AP7922B suits IT departments, data center operators, and businesses managing dense racks that need more than passive power distribution. It is especially valuable where remote reboot capability, outlet-level control, and load visibility reduce site visits and downtime.

Final Thoughts on the AP7922B

Modern infrastructure needs control and visibility at the rack. The APC AP7922B delivers switched outlet management, network monitoring, and sixteen-outlet capacity in a compact 2U design. For teams modernizing power distribution, the AP7922B is a smart, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Rack PDU, Basic, 1U, 16A, 208&230V, (10)C13 & (2)C19 (AP9559): Efficient, No-Frills Power Distribution for Rack Environments

Not every rack deployment requires switched or monitored power distribution, sometimes what’s needed is simple, dependable outlet capacity that gets the job done without added complexity. The APC AP9559 delivers exactly that, offering a basic rack PDU with 16A capacity, dual voltage support for 208V and 230V, and a generous mix of ten C13 and two C19 outlets in a compact 1U form factor.

Introducing the AP9559

The AP9559 is designed to provide straightforward power distribution for rack-mounted servers, switches, and networking equipment. With ten C13 outlets and two higher-capacity C19 outlets, it accommodates a wide range of device power requirements from a single unit, making it a versatile choice for server rooms and data closets that need reliable outlet capacity without the overhead of intelligent monitoring features.

Dual Voltage Support on the AP9559

One of the practical advantages of the AP9559 is its support for both 208V and 230V operation, giving IT teams flexibility when deploying across different regions or electrical configurations. This dual voltage compatibility simplifies procurement and standardization for organizations managing multiple sites with varying power infrastructure.

Mixed Outlet Configuration of the AP9559

The AP9559’s combination of ten C13 and two C19 outlets allows it to power a diverse mix of equipment, from standard servers and switches that use C13 connections to higher-draw devices requiring the heavier-duty C19 outlets. This flexibility reduces the need for separate PDUs to accommodate different equipment types, simplifying rack power planning.

Space-Saving 1U Form Factor of the AP9559

Rack space is always at a premium, and the AP9559’s compact 1U design ensures that robust outlet capacity doesn’t come at the cost of valuable rack units. This efficient footprint allows businesses to maximize the amount of active equipment they can deploy in a given rack while still maintaining ample, dependable power distribution.

Reliable Simplicity: Why Basic PDUs Like the AP9559 Still Matter

While switched and monitored PDUs offer advanced features, many environments simply don’t require that level of complexity or cost. The AP9559 delivers dependable, no-frills power distribution that’s easy to install and requires no configuration, making it an ideal choice for smaller server rooms, secondary racks, or environments where basic outlet capacity is all that’s needed.

Who Should Choose the AP9559

The AP9559 is well suited for IT teams and businesses that need reliable rack power distribution without the added cost or complexity of switched or monitored features. It’s particularly valuable for secondary racks, smaller server rooms, or organizations standardizing on dual-voltage PDUs across multiple sites.

Final Thoughts on the AP9559

Not every rack needs intelligent power management, sometimes dependable, high-capacity outlet distribution is exactly what the job calls for. The APC AP9559 delivers this with its mixed C13/C19 outlet configuration, dual voltage flexibility, and space-efficient 1U design. For businesses seeking straightforward, reliable rack power distribution, the AP9559 is a practical and cost-effective choice.

CONTACT US @ TIACO TECHNOLOGIES.