Powerful APC AP9559 Rack PDU: Ultimate Power Control

Not every rack needs switched or metered power distribution. Sometimes you just need dependable outlet capacity that does the job without added complexity. The APC AP9559 is a basic 1U rack PDU rated for 16A and 3680VA. It works at 120V, 208V, and 230V, and gives you ten C13 and two C19 outlets in a compact chassis.

Introducing the AP9559

The AP9559 provides power outlets for rack-mounted servers, switches, and networking equipment. Ten IEC C13 outlets and two higher-capacity C19 outlets cover a wide mix of devices. All twelve outlets are always on, so it suits server rooms and data closets that want low-cost, reliable power distribution without monitoring features.

Multi-Voltage Support on the AP9559

The AP9559 accepts 120V, 208V, and 230V nominal input, with an acceptable input range of 90V to 250V. That flexibility lets IT teams deploy it across regions and electrical configurations. Standardizing on one PDU model across several sites simplifies purchasing and spares.

Mixed Outlet Configuration of the AP9559

Ten C13 outlets handle standard servers and switches, and two C19 outlets handle heavier-draw equipment. You can power a diverse mix of devices from one unit and avoid separate PDUs for different outlet types. That makes rack power planning simpler.

Compact 1U Form Factor of the AP9559

Rack space is always scarce. The AP9559 takes up 1U and measures about 44.7 x 4.4 x 5.7 cm. It weighs under 1kg. It mounts horizontally with the included rack brackets, or vertically using its vertical mounting capability, and it can mount to the front or rear of the rack. Power goes right where the equipment is.

Built-In Protection and Reliability of the AP9559

An overload protection circuit breaker helps protect the PDU and connected equipment. The 2.5 m input cord, with an IEC C20 input and cord retention clips, keeps the connection secure. The unit carries cUL, UL, CE, and VDE certifications, which supports professional installations.

Reliable Simplicity: Why Basic PDUs Like the AP9559 Still Matter

Switched and metered PDUs offer more features, but many environments don’t need them and shouldn’t pay for them. The AP9559 delivers dependable distribution that is easy to install and needs no configuration. It is a sensible fit for secondary racks, smaller server rooms, and any rack where basic outlet capacity is all you need.

Warranty and Value of the AP9559

The AP9559 is backed by a 2-year warranty. Low cost, a simple design, and 3680VA of capacity make it an economical way to equip a rack.

Who Should Choose the AP9559

The AP9559 suits IT teams and businesses that need reliable rack power distribution without the cost or complexity of switched or metered features. It is especially useful for secondary racks, smaller server rooms, and organizations standardizing on multi-voltage PDUs across several sites.

Final Thoughts on the AP9559

Not every rack needs intelligent power management. Sometimes dependable, high-capacity outlet distribution is exactly what the job calls for. The APC AP9559 delivers it with a mixed C13/C19 outlet configuration, multi-voltage flexibility, and a space-efficient 1U design. For anyone who wants straightforward, reliable rack power distribution, the AP9559 is a practical, cost-effective choice.

CONTACT US @ TIACO TECHNOLOGIES.

Take Control of Every Outlet in Your Rack: The APC AP7922B Switched Rack PDU

In a server rack, power distribution is easy to overlook until something goes wrong — a locked-up device that needs a hard reboot, a circuit that’s quietly approaching overload, or a piece of equipment nobody remembers is still plugged in and drawing power. The APC AP7922B Switched Rack PDU exists to turn that guesswork into precise, remote control over every single outlet in your rack.

More Than Just a Power Strip for Racks

At a glance, a rack PDU might look like a glorified extension lead built for a 19-inch rack. The AP7922B is something considerably more capable. It’s a switched rack PDU with a maximum current capacity of 32A and an input voltage of 230V, featuring 16 IEC 60320 C13 outlets and an IEC 60309 input connection — enough capacity and outlet density to power a genuinely full rack of servers, switches, and storage without daisy-chaining strips or running out of sockets.

The defining word here is “switched.” Unlike a basic PDU that simply distributes power, this unit lets you control it. Remote individual outlet control lets users remotely manage outlets, turning off ones that aren’t in use to prevent overloads, or recycling power to locked-up equipment — which means a frozen server or unresponsive network switch no longer requires a physical trip to the server room. You can power-cycle it from wherever you’re managing the rack from, minimizing costly downtime and the travel time that comes with reaching remote or hard-to-access equipment.

Built to Fit Real Rack Environments

Space in a rack is always at a premium, and the AP7922B is designed with that constraint in mind. It has a compact 2U form factor, measuring roughly 3.5 inches high, 17.5 inches wide, and 4.5 inches deep, and weighs approximately 9.92 pounds, with a 10-foot cord that gives you real flexibility in routing power from the rack’s PDU mounting point. Installation is straightforward too — the package includes rack mounting brackets and an installation guide, so it’s ready to go into a standard rack without hunting down separate hardware.

Real Management, Not Just a Physical Switch

What genuinely sets the AP7922B apart from a basic power strip is the depth of its network management. Users can access, configure, and control the unit through secure Web, SNMP, Command Line Interface, or Telnet interfaces, giving IT teams the flexibility to manage it through whatever tools already fit their existing workflow. For larger environments, it doesn’t operate in isolation either — it’s complemented by APC’s centralized management platforms, including StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency tools, letting a single dashboard oversee power distribution across an entire data center rather than rack by rack.

Staying current is effortless, too. Flash-upgradeable firmware allows quick and easy upgrades via network download, eliminating the need to physically replace units already installed in the field when new features are released. That’s a meaningful cost and time saving over the life of the hardware — a PDU purchased today keeps gaining capability well into the future.

Proactive Protection Against Overloads

Overloaded circuits are one of the more preventable causes of unplanned downtime in a rack, and the AP7922B is built to catch the problem before it becomes an outage. Users can define alarm thresholds to avoid overloaded circuits, with network and visual alarms informing them of possible problems before they escalate. That kind of early warning turns a potential emergency into a routine adjustment — move a load, shed a device, or rebalance a circuit long before a breaker trips and takes multiple systems down with it.

Built and Certified for Serious Environments

This isn’t a consumer-grade product dressed up for a rack — it’s engineered and certified to the standards enterprise IT demands. The unit is CE and VDE certified, and its 7360VA load capacity reflects genuine capacity for high-density equipment loads, not a marketing number. It’s designed for high-density IT environments and enterprise data centers where equipment reliability and uptime are non-negotiable.

The Bottom Line

Managing power at the outlet level sounds like a small thing — until you’re the person who has to physically walk to a locked rack at 2 a.m. to reboot a hung server, or the one explaining an outage caused by a circuit nobody was monitoring. The APC AP7922B turns power distribution from a passive afterthought into an active, remotely manageable part of your infrastructure. Sixteen outlets, real switching control, network-based management, and proactive overload alarms — all in a compact 2U footprint built to disappear into a standard rack. For any environment where downtime has a real cost, that’s control worth having.

CONTACT US @ TIACO TECHNOLOGIES.