Powerful APC SMT2200I: Ultimate Power Protection Now!

Businesses running a moderate but important IT load need solid capacity and easy-to-read status information in one UPS. The APC Smart-UPS SMT2200I provides 2200VA/1980W of line-interactive protection at 230V, with nine battery-backed outlets, a multifunction LCD, and a SmartSlot for network management.

Introducing the SMT2200I

The SMT2200I is part of APC’s Smart-UPS series, designed to give IT professionals and network administrators intelligent, efficient protection for servers, storage, networking, VoIP, and retail point-of-sale equipment. At 2200VA/1980W, it has solid headroom for several servers, switches, and other critical devices at once, so it suits growing businesses with moderate power protection needs.

Pure Sine Wave and AVR Protection in the SMT2200I

The SMT2200I produces a pure sine wave output on battery, which gives the highest compatibility with active power-factor-corrected servers and sensitive electronics. Automatic voltage regulation (AVR) corrects voltage sags and surges without drawing on the battery, so the battery is saved for real outages. A wide input range, about 160V to 285V, helps it ride through voltage swings, and a 365-joule surge energy rating adds protection against spikes.

LCD Display and Real-Time Monitoring on the SMT2200I

The multifunction LCD gives clear, real-time information on power status, battery health, and load. You can configure language, power-quality settings, and alarm thresholds at the unit. IT staff can assess the UPS at a glance, with no separate software needed for day-to-day checks.

Outlets and Connectivity on the SMT2200I

The unit provides eight IEC C13 outlets and one IEC C19 outlet, plus IEC jumper cables, and all provide battery backup. Switched outlet groups let you reboot hung devices, shed non-critical loads to conserve runtime, or sequence startup. USB and RS-232 ports connect to your computer, and a SmartSlot accepts an optional Network Management Card for remote monitoring. An Emergency Power Off (EPO) input adds a safety control.

Battery Backup Runtime with the SMT2200I

During an outage, the SMT2200I gives IT teams time to save critical data, shut down safely, or hand over to a generator. Typical backup is around 7 to 8 minutes at the full 1980W load, and longer at lighter loads. The battery is hot-swappable and user-replaceable, so servicing doesn’t require powering down protected equipment. A cold-start function lets the unit power up on battery when the grid is down, and automatic restart brings loads back when power returns.

Installation and Design of the SMT2200I

The SMT2200I is a tower, about 435 x 197 x 544 mm. It ships with a rack-mounting rail kit and a tower stand, so it can go into a rack or stand on the floor. At about 49kg, it is a substantial unit, so plan for safe lifting. Noise is around 45 dBA. PowerChute software supports graceful shutdown of connected systems.

Solid Capacity for Mid-Sized IT Environments: The SMT2200I

At 2200VA, the SMT2200I strikes a strong balance between capacity and manageability. It suits businesses that need dependable protection for several pieces of equipment without the cost or complexity of larger systems.

Who Should Choose the SMT2200I

The SMT2200I suits small to mid-sized businesses and IT departments running server or networking equipment that need dependable line-interactive protection with clear built-in monitoring. It is especially valuable for organizations that want straightforward visibility into their power protection, with the option to add network management later.

Final Thoughts on the SMT2200I

Reliable protection with smart, accessible monitoring makes the APC Smart-UPS SMT2200I a solid choice for growing IT environments. Pure sine wave output, AVR, a multifunction LCD, nine battery-backed outlets, and a SmartSlot give businesses a practical way to safeguard critical equipment while staying informed. For organizations that want dependable, smart UPS protection at 2200VA, it is a trustworthy, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS SUA2200I: Ultimate Protection

Businesses running multiple servers or networking devices need power protection with enough capacity to handle the load, along with reliable connectivity for monitoring and integration. The APC Smart-UPS SUA2200I delivers both, offering 2200VA of trusted line-interactive protection at 230V, complete with USB and serial connectivity options for flexible system integration.

Introducing the SUA2200I

The SUA2200I is part of APC’s long-established Smart-UPS series, designed to protect servers, networking equipment, and other business-critical devices from power disruptions. With a 2200VA capacity, it offers solid headroom for protecting multiple pieces of equipment simultaneously, making it a strong fit for small server rooms and networking closets that need dependable, higher-capacity protection.

Line-Interactive Protection in the SUA2200I

The SUA2200I uses line-interactive technology to automatically correct voltage sags and surges without unnecessarily switching to battery power. This efficient approach helps preserve battery life while still delivering fast, dependable protection during genuine outages, keeping connected servers and networking equipment safe from unstable power conditions.

USB and Serial Connectivity on the SUA2200I

A key advantage of the SUA2200I is its dual connectivity options, offering both USB and serial ports for integration with monitoring software and management systems. This flexibility allows IT teams to choose the connection method that best fits their existing infrastructure, whether integrating with modern USB-based systems or legacy serial-based setups.

Battery Backup Runtime with the SUA2200I

During a power outage, the SUA2200I provides dependable runtime that gives IT teams time to save critical data, shut down systems safely, or transition to backup power sources. This buffer plays an important role in preventing data loss and equipment damage that can result from sudden, unplanned power interruptions.

Proven Reliability of the Smart-UPS Line in the SUA2200I

As part of APC’s widely trusted Smart-UPS family, the SUA2200I benefits from decades of proven performance in business environments. This established reputation gives IT decision-makers confidence that they’re investing in dependable, well-tested UPS technology backed by a long track record of reliability.

Solid Capacity for Multi-Device Protection: The SUA2200I

At 2200VA, the SUA2200I offers enough capacity to protect several servers, switches, or networking devices from a single unit, reducing the need for multiple smaller UPS systems and simplifying power protection management for growing IT environments.

Who Should Choose the SUA2200I

The SUA2200I is a strong fit for small to mid-sized businesses and IT departments running multiple servers or networking devices that need dependable, higher-capacity power protection along with flexible connectivity options. It’s particularly valuable for organizations integrating with existing monitoring or management software.

Final Thoughts on the SUA2200I

Reliable power protection paired with flexible connectivity makes the APC Smart-UPS SUA2200I a strong choice for growing IT environments. With its solid 2200VA capacity, dependable line-interactive protection, and dual USB/serial connectivity, it offers businesses a practical, adaptable way to safeguard critical equipment. For organizations seeking trusted, high-capacity UPS protection with flexible integration options, the SUA2200I is a smart and dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I)

In the realm of critical IT and home office setups, where even a brief power hiccup can lead to data loss or hardware damage, a trusted uninterruptible power supply (UPS) is indispensable. The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) from Schneider Electric’s APC line stands as a robust line-interactive solution, offering 2200VA/1980W capacity tailored for 230V environments. With sine wave output, automatic voltage regulation (AVR), and connectivity via USB and serial ports, it’s engineered to protect servers, networking gear, and sensitive electronics from outages, surges, and fluctuations—making it a staple for small businesses and demanding home users alike.

What Defines the APC SUA2200I’s Superiority?

This tower-form UPS leverages APC’s proven Smart-UPS architecture for intelligent power management, including AVR that boosts low voltages by up to 30% and trims highs by up to 12% to maintain stability without unnecessary battery drain. A swift 2ms transfer time ensures near-instantaneous switch to battery during blackouts, while the hot-swappable battery design allows replacements without interrupting operations. Integrated PowerChute software via USB or serial enables automated shutdowns, real-time monitoring, and event logging, with optional SmartSlot for network cards adding remote oversight.

Core strengths include:

  • Pure Sine Wave Output: Delivers clean power for power-factor-corrected devices like modern servers.
  • Surge and Noise Protection: 365 Joules rating with EMI/RFI filtering to shield against spikes and interference.
  • Scalable Design: Supports external battery packs for extended runtime in prolonged outages.
  • Energy Efficiency: Optimized for at least 10% better performance than prior generations, reducing operational costs.

Though it’s noted as discontinued in some markets, replacement batteries and service plans remain widely available, ensuring long-term viability.

Technical Specifications Overview

Here’s a curated table of the SUA2200I’s essential specs for quick reference:

CategorySpecification
Capacity2200VA / 1980W
TopologyLine Interactive
WaveformPure Sine Wave
Input Voltage151-302V (Nominal 230V)
Output Voltage230V
Frequency47-53 Hz (Auto-sensing)
Outlets8x IEC 320 C13 + 2 Jumpers + 1x IEC 320 C19
Transfer Time2ms Typical
Battery TypeSealed Lead-Acid (Hot-Swappable RBC55, 3-5 Year Lifespan)
Recharge Time3 Hours to 90%
Runtime Estimates~6-8 min at Full Load (1980W); ~24 min at Half Load (990W)
Surge Protection365 Joules
Dimensions (H x W x D)43.2 cm x 19.7 cm x 54.4 cm
Weight50.91 kg
Operating Temp0-40°C
Noise LevelAudible Fan (Varies by Load)

Its substantial build suits floor-standing placement, though the weight demands careful handling during installation.

Real-World Performance and User Experiences

In practical tests, the SUA2200I excels at sustaining loads seamlessly—users report it powering a mid-sized server rack through 10-minute outages with stable output, thanks to AVR handling common brownouts in urban grids. The PowerChute integration shines for IT pros, facilitating email alerts and graceful shutdowns, while the sine wave prevents issues with active PFC PSUs.

Community feedback is largely enthusiastic, with 4.5/5 averages on retailer sites praising its durability and “set-it-and-forget-it” reliability for business-critical setups. Reddit homelab enthusiasts value the communication options for web interfaces, though some note the line-interactive nature suits moderate rather than extreme loads. Drawbacks include the cooling fan’s hum in quiet rooms and setup hurdles for advanced software features like notifications. On forums, battery float voltage tweaks (around 54.5-55.4VDC) are common for optimal longevity, and while heavy, its robust construction earns nods as “head and shoulders above competitors.” Recent maintenance shares highlight easy servicing, but the discontinued status prompts stockpiling spares.

Who Benefits Most from the APC SUA2200I?

This UPS is a prime fit for:

  • IT Departments: Safeguarding servers and NAS in small data rooms.
  • Small Businesses: Protecting POS systems and VoIP setups from regional power woes.
  • Home Labs: Backing high-end workstations or gaming rigs needing clean power.

For lighter duties, APC’s Essential series may suffice; for rackmount needs, explore SMT variants. At 2200VA, it balances capacity and cost for mid-tier demands.

Pros and Cons

Pros:

  • Potent capacity with sine wave for sensitive gear.
  • AVR and hot-swap battery for uptime focus.
  • Comprehensive management via USB/serial and PowerChute.
  • Proven APC reliability with 1-year warranty.

Cons:

  • Bulky and heavy for mobility.
  • Fan noise in low-load scenarios.
  • Moderate surge rating; dated interfaces (no USB-C).
  • Higher price point for casual users.

In Conclusion: A Timeless Defender for Power Stability

The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) remains a cornerstone of reliable power protection, blending high capacity, intelligent features, and APC’s storied dependability to thwart downtime’s threats. Despite its age and occasional quirks, user acclaim for performance in real crises underscores its value—ideal if you’re investing in lasting IT resilience. Even post-discontinuation, it’s a worthy legacy pick.

Considering an upgrade? Scout FROM US @ TIACO TECHNOLOGIES for availability and service options.

Exploring the APC Smart-UPS SMT2200I

In the realm of IT and home office setups, where power inconsistencies can disrupt everything from video calls to data backups, the APC Smart-UPS SMT2200I offers a reliable line-interactive solution. This 2200VA/1980W tower UPS, optimized for 230V systems, features an LCD display, Automatic Voltage Regulation (AVR), and pure sine wave output to protect servers, networking devices, and workstations from surges, sags, and blackouts. Launched as part of the acclaimed Smart-UPS series, it balances efficiency and expandability for small to medium environments. Let’s dive into its capabilities.

Key Specifications at a Glance

The SMT2200I combines compact design with robust specs, certified for CE, EN 50091, and VDE standards. Here’s a snapshot:

SpecificationDetails
Capacity2200 VA / 1980 W
Input Voltage230 V nominal; range 160–286 V (adjustable 151–302 V)
Output Voltage230 V (configurable: 220 V, 230 V, or 240 V)
Outlets8x IEC 320 C13, 1x IEC 320 C19 (plus 2x IEC Jumpers)
WaveformSine wave (<5% harmonic distortion at full load)
Transfer Time2 ms typical
EfficiencyUp to 97.9% at 75–100% load
Surge Protection365 Joules; full-time multi-pole EMI/RFI filtering (0.3% IEEE let-through)
Battery TypeSealed lead-acid VRLA (RBC55 cartridge, hot-swappable)
Recharge Time3 hours to 90% capacity
Dimensions (H x W x D)43.5 x 19.7 x 54.4 cm
Weight48.8 kg
Operating Temp0–40°C; 0–95% humidity (non-condensing)
Warranty2 years (repair or replace, excluding battery)

These make it a flexible choice for international setups with auto-sensing 50/60 Hz input.

Standout Features That Deliver Smart Protection

The SMT2200I’s “Smart” label reflects its user-centric innovations, making it more than just backup power.

Multi-Function LCD and AVR

The LCD console provides real-time metrics on load, runtime, and events in multiple languages, with easy navigation for configurations. AVR boosts or trims voltages without battery use, extending life in fluctuating grids—handling 160–286V seamlessly.

Pure Sine Wave and Expandability

Clean output supports sensitive electronics like PF-corrected PSUs, with a 3:1 crest factor for inrush handling. A SmartSlot allows add-ons like network cards, while USB/RS-232 ports enable PowerChute software for automated shutdowns and logging.

Battery and Acoustic Efficiency

The RBC55 pack offers maintenance-free operation with predictive self-tests. At 45 dBA, it’s quiet for office use, with just 275 BTU/hr thermal output in online mode—RoHS-compliant for eco-friendliness.

Performance in Action: Runtime and Real-World Reliability

Runtime charts show strong endurance: At full load (1980W), it provides about 7 minutes for critical saves. Half load (990W) extends to 24 minutes, covering typical outages. Lighter draws, like 500W for networking, can reach 50+ minutes.

In 2025 user reports, it bridged a 5-minute blackout in a small server setup without issues, crediting AVR for preventing dips during 180V brownouts. Efficiency peaks at 97.9% under moderate loads, keeping energy costs low, though fan noise rises slightly at peaks. Overall, it excels with 47–53 Hz sync for generators.

Easy Setup and Maintenance Tips

Setup is intuitive: Connect the IEC-320 C20 input to a 15A outlet, plug devices into C13/C19 ports (jumpers for extras), and link USB for PowerChute—LCD setup completes in minutes.

Maintenance includes monthly self-tests via LCD, RBC55 replacement every 3–5 years, and quarterly vent cleaning. Recharge fully after discharges; optimal at <25°C ambient.

Pros, Cons, and Who It’s For

Pros:

  • High efficiency and AVR for cost-effective, stable power.
  • Informative LCD and SmartSlot for easy management.
  • Compact tower suits desks or closets.
  • Solid surge rating and sine wave purity.

Cons:

  • 48.8 kg weight needs careful placement.
  • No native network card (requires SmartSlot add-on).

Ideal for SMBs, homelabs, or VoIP/POS systems (e.g., 2–3 servers at 70% load for 15+ minutes). In unstable regions, it’s a value gem; opt for active models like SRT for zero-transfer needs.

Wrapping Up: Enduring Reliability for Modern Demands

On October 10, 2025, the APC Smart-UPS SMT2200I endures as a smart, efficient defender against power pitfalls, from LCD insights to scalable runtime. Its blend of features fortifies workflows without fuss- CONTACT US @ TIACO TECHNOLOGIES for Availability & Price.

Shielding your setup with the SMT2200I? Drop your runtime experiences in the comments!

APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I)

In an era of volatile power grids and rising demands on IT infrastructure, a reliable Uninterruptible Power Supply (UPS) is crucial for preventing data loss and downtime. The APC Smart-UPS 2200VA USB & Serial 230V (model SUA2200I), from APC by Schneider Electric, is a line-interactive tower UPS engineered for 230V environments, delivering robust protection for mid-sized servers, workstations, and networking equipment. As a legacy model still valued for its durability, it combines high capacity with intelligent management features. This October 2025 blog delves into its specifications, standout capabilities, runtime performance, and user insights to help you gauge its fit for modern setups.

Key Specifications at a Glance

The SUA2200I supports up to 1980W, making it a step up for demanding loads while maintaining a tower form factor. Here’s a breakdown of its core technical details:

CategorySpecification
Power Capacity2200VA / 1980W
TopologyLine Interactive
Input Voltage230V (adjustable range: 160-286V)
Output Voltage230V, Sine Wave
Outlets8x IEC 320 C13 + 1x IEC 320 C19 + 2x IEC Jumpers
Battery TypeSealed Lead-Acid (maintenance-free; 3-hour recharge; 3-5 year life)
Surge Protection365 Joules
Dimensions (HxWxD)432mm x 196mm x 544mm
Weight51 kg
Operating Temperature0-40°C
Warranty1 year repair or replace

With certifications like CE and RoHS, it ensures safety and eco-compliance, featuring a DB-9 RS-232, USB, and SmartSlot for expanded connectivity.

Standout Features and Benefits

The SUA2200I shines with professional-grade tools that enhance reliability and usability.

  • Automatic Voltage Regulation (AVR): Boosts or bucks input voltages (160-286V) without battery use, preserving runtime for true outages and stabilizing power in fluctuating grids.
  • LED Status Display: Bar graphs for load and battery capacity, plus indicators for online, on-battery, replace battery, and overload—simple yet informative for quick status checks.
  • Connectivity Options: USB and serial ports integrate with PowerChute software for automated shutdowns, event logging, and remote management; SmartSlot supports optional network cards.
  • Pure Sine Wave Output: Delivers clean power (<5% THD) for sensitive devices like active PFC PSUs, with intelligent battery management including temperature-compensated charging.

Additional perks include hot-swappable batteries, audible alarms, and generator compatibility. Benefits? Extended battery life (up to 5 years) and seamless protection for entry servers, POS systems, and VoIP setups, all in a relatively quiet unit (under 50 dBA).

Runtime Performance: How Long Will It Last?

The SUA2200I’s battery provides scalable backup, ideal for safe shutdowns during blackouts. Runtimes vary by load and conditions; based on manufacturer data:

Load (Watts)Estimated Runtime
990 (Half)24.1 minutes
1980 (Full)6.7 minutes

For lighter loads (e.g., 500W networking), expect 40+ minutes. Self-tests and precision charging optimize longevity—replace via user-replaceable cartridges every 3-5 years.

Who Should Buy the APC SUA2200I?

This UPS is suited for:

  • Small Businesses: Backing servers, routers, and retail systems from downtime.
  • Home Offices/IT Labs: Protecting high-wattage desktops and NAS during storms.
  • Legacy Upgraders: Reliable power for 230V setups where expandability isn’t key.

It’s less ideal for rack-mount needs—consider RM variants—or ultra-extended runtimes without external packs.

User Reviews: Pros, Cons, and Real-World Insights

The SUA2200I enjoys strong acclaim for its robustness, with 2025 feedback averaging 4.5/5 across sites like Amazon and forums. Users praise its “flawless surge handling” during outages, powering servers for over 20 minutes at half load. One reviewer highlighted easy PowerChute integration for remote alerts, calling it a “workhorse for small offices.” Reddit homelab threads affirm its value for line-interactive efficiency, though some note the hefty 51kg weight as a setup challenge.

Pros:

  • High-capacity sine wave for sensitive gear.
  • Solid AVR and software ecosystem.
  • Proven longevity in unstable power areas.

Cons:

  • Bulky and heavy for solo installation.
  • Discontinued status limits new stock.
  • Modest base runtime at full load.

Final Thoughts: Legacy Powerhouse for Demanding Protection

The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) endures as a dependable sentinel, blending AVR intelligence and clean output for 2025’s hybrid environments. It’s a savvy pick for those seeking APC reliability without modern frills. If mid-tier backup is your need, this tower delivers enduring value. CONTACT US @ TIACO TECHNOLOGIES.

Powered through chaos with the SUA2200I? Share your saga in the comments!

APC Smart-UPS SRT 2200VA 230V (SRT2200KLI)

In today’s world of constant connectivity and data-driven operations, power interruptions can spell disaster for businesses and critical systems. Whether you’re running a small office server, medical equipment, or industrial controls, having a dependable uninterruptible power supply (UPS) is non-negotiable. Enter the APC Smart-UPS SRT 2200VA 230V (SRT2200KLI), a powerhouse from Schneider Electric’s renowned APC line. This double-conversion online UPS is engineered for mission-critical environments, offering zero-transfer-time protection and scalable runtime to keep your gear humming through blackouts, surges, and fluctuations. In this blog, we’ll dive deep into its specs, features, performance, and real-world applications to help you decide if it’s the right fit for your setup.

Key Specifications at a Glance

The SRT2200KLI packs impressive power in a compact package, tailored for 230V regions with options for flexibility. Here’s a quick overview:

SpecificationDetails
Output Power Capacity1980 Watts / 2200VA
Nominal Output Voltage230V (configurable for 220V or 240V)
Output Connections8x IEC 60320 C13, 2x IEC 60320 C19, 2x IEC Jumpers
Nominal Input Voltage230V
Input ConnectionIEC 60320 C20
Input Voltage Range160–275V (100–275V adjustable at half load)
Output WaveformPure Sine Wave
Battery TypeMaintenance-free, sealed lead-acid (replaceable with APCRBC141)
Typical Recharge Time~3 hours
Runtime~4–5 minutes at full load (1980W); ~45–60 minutes at 100–200W
Transfer Time0 ms (online topology)
Surge Energy Rating340 Joules
Dimensions (H x W x D)432 x 85 x 584 mm
Weight25 kg
ConnectivityRJ-45 Serial, USB, SmartSlot
Warranty2 years (UPS)

These specs make it a robust choice for demanding loads, with certifications like CE, EAC, RCM, VDE, and EN/IEC 62040-1/2 ensuring global compliance and safety.

Design and Build: Built to Last

At first glance, the SRT2200KLI’s tower form factor (with optional rack-mount kit) screams professionalism. Measuring just 432mm high, 85mm wide, and 584mm deep, it fits neatly under desks or in server racks (2U with SRTRK4 kit, sold separately). The 25kg metal enclosure is rugged, shielding internals from dust and impacts—ideal for industrial or lab settings.

The front LCD display is a standout: it provides at-a-glance insights into input/output voltage, load percentage, battery status, and alerts. Around back, you’ll find ample outlets (8x C13 for standard devices, 2x C19 for high-power gear), plus USB/serial ports for direct PC connections and a SmartSlot for add-ons like network cards. An emergency power-off (EPO) button adds safety, and cold-start functionality lets you boot from battery alone during total outages. The sleek black finish isn’t just aesthetic—it’s practical for professional environments.

Standout Features That Set It Apart

What elevates the SRT2200KLI from basic UPS units? Its advanced tech focuses on zero-downtime reliability:

  • Double-Conversion Online Topology: Unlike line-interactive models, this continuously converts AC to DC and back, delivering a pure sine wave with <2% distortion. No glitches during switches—perfect for servers with power factor correction (PFC) supplies.
  • Scalable Runtime: Start with built-in batteries for quick shutdowns, then add up to 10 external packs (SRT72BP) for extended operation. From minutes at full tilt to hours at lighter loads, it’s adaptable to your needs.
  • Green Mode Efficiency: When power’s stable, it bypasses conversion for up to 97% efficiency, slashing energy bills without compromising protection.
  • Smart Monitoring Tools: The LCD is user-friendly, but pair it with PowerChute software for automated shutdowns and diagnostics. Add a Network Management Card (via SmartSlot) for remote EcoStruxure IT oversight, email alerts, and SNMP integration.
  • Surge and Noise Defense: 340 Joules of protection filters spikes and EMI/RFI noise, safeguarding sensitive electronics.
  • User-Friendly Maintenance: Hot-swappable batteries mean no downtime for replacements, and temperature-compensated charging extends battery life.

These features make it a forward-thinking investment for proactive power management.

Performance in Action

In real tests and user scenarios, the SRT2200KLI shines. Its wide input range (160–275V) handles brownouts and generator inputs effortlessly, while the pure sine wave ensures seamless operation—no humming or reboots on battery. Efficiency hits 97% in Green Mode, and noise levels hover at ~55 dBA (noticeable but tolerable in server rooms).

Runtimes align with APC charts: expect 4-5 minutes at max load for graceful shutdowns, stretching to 45-60 minutes for lighter setups like a few workstations. Users report flawless handling of unstable grids in regions like Africa, with one noting it powered a full office rig for over an hour without a hitch. Battery recharge is swift at ~3 hours, and surge suppression has thwarted multiple spikes in lab environments.

Ideal Applications: Where It Excels

This UPS isn’t one-size-fits-all—it’s tailored for high-stakes scenarios:

  • IT and Data Centers: Keeps servers, storage, and switches online during outages.
  • Healthcare: Powers diagnostic tools and monitors without interruption.
  • Industrial Automation: Protects PLCs and controls from power dips.
  • Small Businesses/Telecom: Shields POS systems, VoIP, and routers.
  • Home Pro Setups: Ideal for high-end PCs or NAS in power-unreliable areas.

If your setup demands <5ms tolerance (it’s 0ms here), this is your match.

Pros and Cons: The Honest Breakdown

Pros:

  • Unmatched zero-transfer reliability for critical loads.
  • Pure sine wave and scalable batteries for versatility.
  • Energy-efficient Green Mode and easy monitoring.
  • Hot-swappable design minimizes downtime.
  • Solid warranty and global certifications.

Cons:

  • Fan noise could annoy in quiet offices.
  • Hefty 25kg build requires sturdy placement.
  • Higher upfront cost for premium features.
  • May need extra surge gear in lightning-prone spots.

Overall, positives far outweigh the minor gripes, especially for pros who value uptime.

Final Thoughts: A Powerhouse Worth the Investment

The APC Smart-UPS SRT 2200VA 230V (SRT2200KLI) isn’t just a backup—it’s a proactive guardian for your most vital equipment. With its double-conversion prowess, intelligent features, and proven performance in tough conditions, it’s a staple for IT admins, facility managers, and anyone battling unreliable grids. Priced as a mid-to-high-tier option, it pays off in prevented downtime and peace of mind. Ready to upgrade? CONTACT US @ TIACO TECHNOLOGIES for availability.

Have you used the SRT2200KLI? Drop your thoughts in the comments—we’d love to hear your power protection stories!

APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I)

In an age where digital operations hinge on uninterrupted power, the APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) emerges as a steadfast ally for medium-sized businesses, IT setups, and home offices with demanding loads. This line-interactive tower UPS from Schneider Electric’s renowned APC series packs 2200VA/1980W of capacity, delivering pure sine wave output to nurture sensitive servers, workstations, and networking gear. With built-in AVR for voltage stabilization, USB and serial ports for monitoring, and a user-friendly LED interface, the SUA2200I bridges reliability and manageability without the complexity of online topologies. Whether combating brownouts in unstable grids or ensuring graceful shutdowns during outages, this model shines for its balance of performance and accessibility. Join us as we dissect its features, specs, strengths, and savvy usage tips.

Key Features That Ensure Uptime

The SUA2200I is crafted with pro-grade essentials that prioritize clean power and ease of use:

  • Pure Sine Wave Output and AVR: Generates a low-distortion (<5% at full load) sine wave, compatible with active PFC power supplies, while AVR maintains output within safe limits during fluctuations (input range: 160–286V), conserving battery for true emergencies.
  • Fast Transfer and Surge Safeguards: Switches to battery in just 2ms typical, with 365 Joules of surge protection and full-time multi-pole noise filtering (0.3% IEEE surge let-through) to block spikes and EMI/RFI interference.
  • Intelligent Battery Management: Features a sealed lead-acid battery with 3-hour recharge, automatic self-tests, and a 3–5 year expected lifespan, plus cold-start capability for off-grid power-ups.
  • Connectivity and Monitoring: Dual USB and serial ports integrate with PowerChute software for automated shutdowns and alerts; the LED control panel displays load/battery bars, plus indicators for online, on-battery, overload, and replace-battery status. Audible alarms include configurable delays and low-battery warnings.
  • Robust Tower Design: Freestanding with a compact footprint, it’s built for floor or shelf placement, operating quietly at 45 dBA.

These attributes make the SUA2200I a versatile sentinel for environments where downtime isn’t an option.

Technical Specifications at a Glance

Dive into the details with this handy table of core specs:

CategoryDetails
Power Rating2200VA / 1980W
Input Voltage230V (Range: 160–286V adjustable to 151–302V)
Output Voltage230V (Sine wave, <5% distortion)
Outlets8x IEC 320 C13 + 2x IEC Jumpers + 1x IEC 320 C19 (all battery-backed)
Transfer Time2ms typical
Runtime Estimates7 min at full load (1980W); 15–20 min at half load (990W)
BatterySealed Lead-Acid; 3-hour recharge; 3–5 year life; 816 VAh
Surge Protection365 Joules
Dimensions (WxDxH)19.6 x 54.4 x 43.2 cm
Weight50.92 kg
Frequency50/60 Hz ±3 Hz auto-sensing
EfficiencyUp to 95% at full load
Warranty1 year repair or replace

It supports global frequencies and thrives in 0–40°C ambient temps with 0–95% humidity.

Pros and Cons: Power Packed with Pragmatism

The SUA2200I earns its stripes in reliability, but it’s not without considerations for space or expansion.

Pros:

  • Premium Power Quality: Pure sine wave and ultra-fast transfer excel with finicky IT hardware, reducing failure risks.
  • Comprehensive Monitoring: LED visuals and software integration offer at-a-glance insights and proactive alerts.
  • Energy Efficient: 95% efficiency curbs operating costs, with AVR extending battery life in variable grids.
  • Durable Build: Certifications like CE and VDE underscore its ruggedness for 24/7 use.

Cons:

  • Tower-Only Form: Lacks rack-mount options, limiting appeal for dense server rooms.
  • Modest Native Runtime: Suited for shutdowns, not extended outages— no slots for external packs.
  • Heft Factor: At over 50kg, relocation demands two-person handling.
  • Basic Alarms: Non-silenceable beeps during events may irk quiet environments.

Feedback from users lauds its longevity in real-world deployments.

Who Should Power Up with the SUA2200I?

This UPS fits seamlessly for:

  • Mid-Size Offices: Shielding multiple PCs, printers, and NAS from surges.
  • Network Admins: Backing routers, switches, and small servers in branches.
  • Creative Studios: Protecting high-draw workstations and monitors.
  • Global Deployers: Auto-sensing for 50/60 Hz setups in varied regions.

For rack needs or ultra-long runtime, eye APC’s RM or X series.

Pro Tips for Peak Performance

Elevate your SUA2200I experience:

  • Prime the Battery: Full 3-hour charge post-unboxing; schedule monthly self-tests via software.
  • Optimize Loading: Balance under 1980W, favoring C19 for power-hungry devices—monitor via LEDs.
  • Software Setup: Install PowerChute for email alerts and safe shutdowns; update firmware regularly.
  • Placement Pointers: Ventilate in 0–40°C; avoid carpeted floors to prevent dust buildup.
  • Battery Best Practices: Replace every 3–5 years; store spares at 15–25°C for longevity.

These steps can stretch its service life significantly.

Wrapping Up: Smart Protection for Demanding Loads

The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) stands tall as a line-interactive legend, fusing pure sine wave prowess, swift transfers, and intuitive controls into a tower that’s equal parts guardian and workhorse. While its runtime leans toward efficiency over endurance, the AVR smarts and surge defenses make it indispensable for mid-tier setups chasing zero interruptions. At a competitive price, it’s a wise wager on APC’s proven ecosystem. Ready to fortify your power chain? CONTACT US @ TIACO TECHNOLOGIES—what’s your critical load story? Comment below!

APC Smart-UPS 2200VA LCD 230V (SMT2200I)

In today’s digital landscape, where power disruptions can halt operations, corrupt data, or damage critical hardware, a reliable uninterruptible power supply (UPS) is a cornerstone for small to medium-sized businesses and IT environments. The APC Smart-UPS 2200VA LCD 230V (SMT2200I), part of Schneider Electric’s trusted APC Smart-UPS lineup, delivers robust line-interactive power protection optimized for 230V regions like Europe, Asia, and Africa. With its blend of advanced features, user-friendly design, and cost-effective performance, this tower UPS is ideal for safeguarding servers, networking equipment, and workstations. In this blog, we’ll dive into the SMT2200I’s key features, technical specifications, ideal applications, and why it’s a smart choice in 2025 for ensuring uptime amidst growing power grid challenges.

Key Features: Reliable and Intuitive Power Management

The SMT2200I employs line-interactive topology, which uses Automatic Voltage Regulation (AVR) to correct voltage fluctuations without switching to battery power, preserving runtime for true outages. Its pure sine wave output ensures compatibility with sensitive, power-factor-corrected equipment, setting it apart from budget UPSs with modified sine waves. Here’s what makes it stand out:

  • Automatic Voltage Regulation (AVR): Stabilizes input voltages (160-286V) to deliver consistent 230V output, mitigating brownouts and overvoltages—common in ~70% of power events—without taxing the battery.
  • Pure Sine Wave Output: Provides clean power, reducing stress on modern IT equipment like servers and networking gear, extending hardware lifespan compared to cheaper alternatives.
  • Graphical LCD Interface: A multilingual, intuitive display offers real-time insights into load levels, battery status, estimated runtime, and event logs, simplifying monitoring and diagnostics.
  • High Efficiency with Green Mode: Achieves up to 97% efficiency by bypassing unused components during stable power conditions, lowering energy costs while maintaining full protection.
  • Intelligent Battery Management: Optimizes charging to extend battery life (typically 3-5 years) and provides predictive failure alerts. Hot-swappable batteries enable replacements without powering down connected devices.
  • Remote Management Capabilities: Supports an optional Network Management Card (e.g., AP9641) for remote monitoring via SNMP, HTTP, or PowerChute software, enabling automated shutdowns and alerts. USB and serial ports are included for local connectivity.

These features make the SMT2200I a versatile, user-friendly solution for businesses seeking reliable power protection without complexity.

Technical Specifications: Compact Power for Demanding Loads

Rated at 2200VA/1980W, the SMT2200I is designed for moderate to high-density loads in a compact tower form factor (rack-mountable with optional kits). Its manageable weight and straightforward setup appeal to IT administrators and small business owners.

CategoryDetails
Power Rating2200VA / 1980W
Input Voltage160-286V AC (adjustable via AVR); 50/60 Hz auto-sensing
Output Voltage230V AC ±5% (pure sine wave on battery); Configurable: 220/240V
Outlets8x IEC 320 C13, 1x IEC 320 C19 (all battery-backed and surge-protected)
Form FactorTower; Dimensions: 17.0 x 7.7 x 21.5 inches (432 x 196 x 546 mm)
Weight112 lbs (50.9 kg)
EfficiencyUp to 97% in Green Mode; ~95% in normal operation
Runtime (Full Load)~5.4 minutes (1980W); ~15.7 minutes at half load (990W)
ConnectivityUSB, RJ-45 serial, SmartSlot (for optional NMC), EPO
BatterySealed lead-acid (RBC55); 3-6 hour recharge; 48V nominal
Surge Energy Rating365 Joules
Noise Level<45 dBA at 1m

The unit features an IEC-320 C20 input and supports limited runtime extension with external battery packs (e.g., SMX120BP), though this is less common for its capacity. It’s RoHS-compliant and ENERGY STAR certified, aligning with sustainable IT practices.

Ideal Applications: Versatile Protection for Growing Setups

The SMT2200I is tailored for environments requiring dependable power for critical but manageable loads:

  • Small to Medium Server Rooms: Protects file servers, virtualization hosts, or NAS devices in offices with 5-30 employees, ensuring data integrity during power disruptions.
  • Networking Infrastructure: Keeps routers, switches, and VoIP systems operational, preventing communication breakdowns in retail, healthcare, or branch offices.
  • Workstations and POS Systems: Safeguards high-end PCs, graphic design stations, or point-of-sale terminals in environments like design firms, clinics, or small data centers.
  • Home Labs and Media Servers: Appeals to tech enthusiasts running home servers, gaming rigs, or AV setups, providing clean power and surge protection.

Why Choose the SMT2200I? Balancing Cost and Performance

The SMT2200I offers enterprise-grade features at a mid-tier price, making it ideal for businesses scaling their IT infrastructure on a budget. Its AVR and pure sine wave output protect against power irregularities, which cause ~80% of hardware failures in unstable grids. The Green Mode reduces energy costs, and the LCD interface simplifies management. A 1-year warranty with advance replacement, combined with global availability of RBC55 batteries, ensures low maintenance costs.

Compared to APC’s double-conversion SRT series, the SMT2200I is less suited for extreme power environments but excels for cost-conscious deployments needing line-interactive protection. In 2025, with energy costs rising and grid reliability faltering in regions like Africa and South Asia, its efficiency and uptime assurance are invaluable.

Final Thoughts: A Trusted Solution for Power Continuity

The APC Smart-UPS 2200VA LCD 230V (SMT2200I) delivers reliable, efficient, and user-friendly power protection, making it a top choice for businesses and tech enthusiasts safeguarding critical systems. Whether you’re protecting servers or ensuring network uptime, it’s a smart investment. CONTACT US @ TIACO TECHNOLOGIES for pricing and configurations to secure your setup today.

What power protection challenges do you face? Share in the comments—let’s keep the conversation going!

APC Smart-UPS 2200VA LCD 230V (SMT2200I): A Comprehensive Guide to Reliable Power Protection

The APC Smart-UPS 2200VA LCD 230V (SMT2200I) is a high-performance uninterruptible power supply (UPS) designed to deliver robust power protection for servers, networking equipment, and critical systems in small to medium-sized businesses, home offices, and IT environments. Featuring line-interactive topology, an intuitive LCD interface, and energy-efficient operation, the SMT2200I ensures uninterrupted power and safeguards sensitive electronics from power disturbances. In this blog, we’ll explore the key features, specifications, benefits, and real-world applications of the APC Smart-UPS 2200VA LCD 230V (SMT2200I), highlighting why it’s a trusted choice for reliable power backup.

Key Features of the APC Smart-UPS 2200VA LCD 230V (SMT2200I)

1. Line-Interactive Topology

The SMT2200I employs line-interactive technology, which regulates voltage fluctuations by boosting or trimming incoming power without switching to battery mode. This enhances efficiency, extends battery life, and protects against power surges, spikes, and outages, ensuring stable power delivery to connected devices.

2. High Power Capacity

With a power capacity of 2200VA (2.2 kVA) and 1980 watts, the SMT2200I is well-suited for supporting demanding loads, such as servers, networking gear, and high-performance workstations. Its pure sine wave output during battery operation ensures compatibility with sensitive equipment, including devices with active power factor corrected (PFC) power supplies.

3. Intuitive LCD Interface

The SMT2200I features a user-friendly LCD display that provides real-time information on power conditions, load status, battery health, and estimated runtime. This intuitive interface allows users to monitor and configure the UPS easily without requiring additional software.

4. Automatic Voltage Regulation (AVR)

The built-in AVR corrects low and high voltage conditions without draining the battery, preserving battery capacity for critical outages. This ensures consistent performance and protects connected equipment from voltage fluctuations.

5. Intelligent Battery Management

The UPS uses maintenance-free, sealed lead-acid (VRLA) batteries, which are hot-swappable for easy replacement. APC’s intelligent battery management system optimizes battery performance and longevity, providing notifications for timely battery replacement to ensure continuous protection.

6. Connectivity and Management

The SMT2200I offers USB and serial connectivity for integration with APC’s PowerChute Business Edition software, enabling users to monitor power conditions, configure settings, and perform safe shutdowns during extended outages. It also includes a SmartSlot for optional management cards, such as a network management card for remote monitoring. The UPS features eight IEC 320 C13 outlets and one IEC 320 C19 outlet, providing flexibility for connecting multiple devices.

7. Energy-Efficient Green Mode

The SMT2200I incorporates APC’s patented Green Mode, which bypasses unused electrical components during stable power conditions, achieving up to 97% efficiency. This reduces energy consumption, lowers operating costs, and supports environmentally friendly operations.

Technical Specifications

Here are the key technical details of the APC Smart-UPS 2200VA LCD 230V (SMT2200I):

  • Power Capacity: 1980 watts / 2200 VA
  • Topology: Line-interactive
  • Input Voltage: 230V (160–286V adjustable)
  • Output Voltage: 230V (configurable for 220/240V)
  • Output Connections: 8x IEC 320 C13, 1x IEC 320 C19, 2x IEC jumpers
  • Battery Type: Maintenance-free sealed lead-acid (VRLA), hot-swappable
  • Typical Backup Time: 5.1 minutes at full load (1980W), 14.2 minutes at half load (990W)
  • Recharge Time: Approximately 3 hours
  • Surge Energy Rating: 365 joules
  • Interfaces: USB, serial (RJ-45), SmartSlot
  • Dimensions: 435 x 197 x 544 mm (17.1 x 7.7 x 21.4 inches)
  • Weight: 50.9 kg (112.2 lbs)
  • Warranty: 1-year repair or replace
  • Part Number: SMT2200I

Benefits of the APC Smart-UPS 2200VA LCD 230V (SMT2200I)

1. Reliable Power Backup

The SMT2200I provides dependable backup power, with a runtime of 5.1 minutes at full load or 14.2 minutes at half load, allowing sufficient time for safe shutdowns or bridging short outages. This minimizes downtime and protects against data loss.

2. Enhanced Equipment Protection

With AVR and surge protection (365 joules), the UPS shields sensitive electronics from voltage fluctuations and surges, reducing the risk of hardware damage and extending equipment lifespan.

3. User-Friendly Operation

The LCD interface and PowerChute software simplify monitoring and management, making the UPS accessible to both IT professionals and non-technical users. The SmartSlot and hot-swappable batteries further enhance ease of use and maintenance.

4. Energy Efficiency

The Green Mode achieves up to 97% efficiency, reducing energy consumption and operational costs. This makes the SMT2200I an environmentally friendly choice for businesses aiming to lower their carbon footprint.

5. Versatility

The tower form factor and multiple output connections make the SMT2200I suitable for various applications, from server rooms to home offices. Its compatibility with a wide range of devices ensures flexibility for diverse setups.

Real-World Applications

The APC Smart-UPS 2200VA LCD 230V (SMT2200I) is ideal for:

  • Small to Medium Businesses: Protects servers, networking equipment, and point-of-sale systems, ensuring business continuity during power disruptions.
  • Home Offices: Safeguards high-performance PCs, NAS devices, and routers, preventing data loss and hardware damage.
  • Small IT Environments: Provides reliable power for small-scale server racks, storage systems, and telecommunication equipment.
  • Retail and Hospitality: Supports point-of-sale terminals and back-office systems, ensuring seamless operations during outages.

Environmental and Lifecycle Considerations

The SMT2200I is designed with sustainability in mind, featuring energy-efficient Green Mode and recyclable packaging. APC offers a take-back program in select regions for responsible disposal. The UPS comes with a standard 1-year warranty.

Conclusion

The APC Smart-UPS 2200VA LCD 230V (SMT2200I) is a reliable and versatile UPS that delivers robust power protection for small to medium-sized businesses, home offices, and small IT environments. Its line-interactive topology, energy-efficient Green Mode, intuitive LCD interface, and intelligent battery management make it an excellent choice for safeguarding critical systems, such as servers, networking gear, and workstations. With its combination of performance, flexibility, and user-friendly features, the SMT2200I ensures peace of mind by protecting against power disruptions and extending equipment lifespan.

For more information, CONTACT US @ TIACO TECHNOLOGIES.

A Comprehensive Guide to the APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I)

In today’s technology-driven world, ensuring uninterrupted power for critical IT infrastructure is paramount for businesses and professionals. The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I), part of Schneider Electric’s acclaimed Smart-UPS series, is a high-performance uninterruptible power supply (UPS) designed to deliver reliable power protection for servers, networking equipment, and other mission-critical devices. This blog explores the features, benefits, applications, and technical specifications of the SUA2200I, highlighting why it’s a trusted choice for robust power management.

Overview of the APC Smart-UPS 2200VA (SUA2200I)

The APC Smart-UPS 2200VA (SUA2200I) is a line-interactive UPS with a 2200VA/1980W power capacity, optimized for 230V environments. Designed for small to medium-sized businesses, data centers, and server rooms, it offers pure sine wave output, advanced power management, and a compact tower design. With USB and serial connectivity, it provides seamless integration with modern IT systems, ensuring continuous operation during power disruptions and protection against voltage fluctuations.

Key Features

1. Pure Sine Wave Output

The SUA2200I delivers pure sine wave output, ensuring compatibility with sensitive electronics, such as servers with active power factor corrected (PFC) power supplies. This mimics utility power, providing the highest level of reliability for critical devices.

2. Line-Interactive Technology

With line-interactive topology, the UPS corrects minor voltage fluctuations (sags or surges) without switching to battery power, enhancing efficiency and extending battery life. This is ideal for regions with unstable power grids.

3. Automatic Voltage Regulation (AVR)

The built-in AVR stabilizes voltage irregularities, delivering consistent power to connected devices and protecting them from damage caused by power surges or dips.

4. Multiple Output Connections

The SUA2200I features 8x IEC 320 C13 outlets and 1x IEC 320 C19 outlet, along with 2x IEC jumper cables, providing flexible connectivity for servers, networking equipment, and other devices. It uses a hardwire 3-wire (H N + G) input for robust power delivery.

5. USB and Serial Connectivity

The UPS includes USB and DB-9 serial ports for advanced management and monitoring. It comes with PowerChute Business Edition software, enabling safe system shutdowns, power monitoring, and diagnostics. It’s also compatible with optional Network Management Cards for remote management.

6. Intelligent Battery Management

APC’s intelligent battery management system uses temperature-compensated charging to optimize battery performance and lifespan. The UPS supports hot-swappable batteries and provides automatic self-tests and a dynamic battery replacement date indicator for proactive maintenance.

7. LED Status Display

An intuitive LED display with load and battery bar graphs offers real-time information on UPS status, input/output voltage, and load capacity, allowing for easy local monitoring and configuration.

8. Cold Start Capability

The cold start function enables the UPS to power on and provide temporary power during a complete power outage, ensuring critical systems can restart without utility power.

9. Audible Alarms and Notifications

The SUA2200I features audible alarms to notify users of power events, such as low battery or overload conditions, ensuring timely action to maintain system uptime.

Benefits of the APC Smart-UPS 2200VA

1. Reliable Power Protection

The SUA2200I ensures uninterrupted operation during power outages, providing ample time for data saving and graceful shutdowns. Its surge protection and AVR safeguard equipment from damaging power disturbances.

2. High Performance for Critical Systems

With its high power capacity and pure sine wave output, the UPS is ideal for protecting high-performance servers, networking equipment, and other sensitive devices, ensuring maximum uptime.

3. Advanced Management Capabilities

The USB and serial connectivity, combined with PowerChute software and optional Network Management Cards, offer robust monitoring and management options, catering to IT professionals’ needs.

4. Versatile Applications

The tower design and multiple outlets make the SUA2200I suitable for:

  • Servers and storage systems
  • Network switches, routers, and hubs
  • Business VoIP systems
  • Retail point-of-sale (POS) systems

5. Eco-Friendly Design

The UPS is packaged with minimum 70% recycled cardboard (50% in the US) and is eligible for APC’s take-back program in select regions, supporting sustainable disposal practices.

Applications

The APC Smart-UPS 2200VA (SUA2200I) is ideal for:

  • Data Centers and Server Rooms: Protects critical servers and storage systems, ensuring data integrity and uptime.
  • Network Closets: Safeguards networking equipment like routers, switches, and hubs from power disruptions.
  • Small to Medium Businesses: Supports POS systems, VoIP phones, and other critical devices in retail or office environments.
  • Regions with Unstable Power: Provides reliable power protection in areas prone to voltage fluctuations or frequent outages.

Technical Specifications

  • Power Capacity: 2200VA / 1980W
  • Input Voltage: 230V (hardwire 3-wire: H N + G)
  • Output Voltage: 230V
  • Output Connections: 8x IEC 320 C13, 1x IEC 320 C19, 2x IEC jumper cables
  • Topology: Line-Interactive
  • Surge Energy Rating: 480 Joules
  • Battery: Maintenance-free sealed lead-acid with suspended electrolyte
  • Transfer Time: 2-4 ms typical
  • Noise Level: <45 dB
  • Dimensions: 432 mm (H) x 196 mm (W) x 544 mm (D)
  • Weight: Approximately 42 kg
  • Warranty: 1 years
  • Certifications: CE, VDE
  • Operating Environment: 0–40°C, 0–95% relative humidity (non-condensing)
  • Connectivity: USB, DB-9 serial, SmartSlot for optional Network Management Card

Why Choose the APC Smart-UPS 2200VA (SUA2200I)?

The SUA2200I offers a powerful combination of high capacity, pure sine wave output, and advanced management features in a compact tower design. Its line-interactive technology, AVR, and intelligent battery management ensure reliable power protection for critical IT infrastructure. Backed by APC’s trusted reputation and a 2-year warranty, this UPS provides peace of mind for businesses relying on uninterrupted power.

Conclusion

The APC Smart-UPS 2200VA USB & Serial 230V (SUA2200I) is a robust and versatile UPS designed for small to medium-sized businesses, data centers, and network environments. With its advanced features, high performance, and eco-friendly design, it delivers dependable power protection and scalability. Whether you’re safeguarding servers, networking equipment, or business-critical devices, the SUA2200I is a smart investment for ensuring business continuity.

For more details, CONTACT US @ TIACO TECHNOLOGIES.