Sale!
APC Smart-UPS 3000VA LCD 230V (SMT3000I) - Tiaco Technologies

APC Smart-UPS 3000VA LCD 230V (SMT3000I)

₦3,500,000.00 ₦2,800,000.00

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.
Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable.
  • Cold-start capable
    Provides temporary battery power when the utility power is out.
  • Energy meter
    Provides actual kilowatt hours of usage for energy conscious users.
  • Green mode
    Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency
    Reduces utility costs, generates less heat.
  • Intuitive LCD interface
    Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
  • Predictive replace battery date
    Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
  • Pure sine wave output on battery
    Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Sequenced network shutdown and reboot
    Customize network shutdown and reboot sequence of connected servers and UPSs.
  • Single switched outlet group
    Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
  • SmartSlot
    Customize UPS capabilities with management cards.
  • StruxureWare Data Center Expert compatible
    Enables centralized management via StruxureWare Data Center Expert.
  • Temperature-compensated battery charging
    Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Safety-agency approved
            Ensures the product has been tested and approved to work                      safely with the connected service provider equipment and                        within the specified environment.
  • Adjustable voltage sensitivity
    Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points
    Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

    Predictive failure notification

    Provides early-warning fault analysis ensuring proactive component replacement.

    Resettable circuit breakers

    Enables a quick recovery from overload events.

    Battery failure notification

    Provides early-warning fault analysis on batteries enabling timely preventive maintenance

    User-replaceable batteries

    Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

    Hot-swappable batteries

    Ensures clean, uninterrupted power to protected equipment
    while batteries are being replaced.

    Serial connectivity

    Provides management of the UPS via a serial port.

    LED status indicators

    Quickly understand unit and power status with visual indicators.

    Audible alarms

    Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

    USB connectivity

    Provides management of the UPS via a USB port (not available on all models).

    Network manageable

    Provides remote power management of the UPS over the network.

    Disconnected battery notification

    Warns when a battery is not available to provide backup power.
Add to wishlist
Category:

Description

Technical Specifications.

Output power capacity:2.7kWatts / 3.0kVA
Max Configurable Power (Watts):2.7kWatts / 3.0kVA
Nominal Output Voltage:230V
Output Voltage Note:Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion:Less than 5% at full load
Output Frequency (sync to mains):47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
Topology:Line Interactive
Waveform type:Sine wave

Output Connections

(8) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)
(1) IEC 320 C19 (Battery Backup)
Transfer Time:2ms typical
Nominal Input Voltage:230V
Input frequency:50/60 Hz +/- 3 Hz (auto sensing)
Input Connections:IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A
Input voltage range for main operations:160 – 286V
Input voltage adjustable range for mains operation:151 – 302V
Number of Power Cords:1
Other Input Voltages:220, 240

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time:3hour(s)
Replacement Battery:RBC55
Expected Battery Life (years):3 – 5
RBC Quantity:1

Extendable Run Time

1

Battery Volt-Amp-Hour Capacity:816

Interface Port(s):SmartSlot, USB
Control panel:Multi-function LCD status and control console
Audible Alarm:Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO):Yes

Available SmartSlot™ Interface Quantity

Surge energy rating:365Joules

Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Maximum Height: 43.5 CM
Maximum Width: 19.7 CM
Maximum Depth: 54.4 CM
Net Weight:52.5 KG

Reviews

There are no reviews yet.

Be the first to review “APC Smart-UPS 3000VA LCD 230V (SMT3000I)”

Related products