Universal Compatibility, Real Protection: The APC Easy UPS SMV 3000VA (SMV3000AI-MS)

Not every business runs the same equipment, and not every piece of equipment ends in the same plug. The APC Easy UPS SMV 3000VA (SMV3000AI-MS) solves that practical headache with universal outlets, while still delivering the line-interactive protection and voltage regulation small and medium businesses actually need to keep critical systems running.

Designed for the Realities of Small Business Power

APC built this UPS specifically with SMB IT needs in mind. For IT professionals in small to medium businesses, APC by Schneider Electric developed the Easy UPS 1 Ph Line-Interactive category to handle essential power protection needs even in the most unstable power conditions. It’s a versatile UPS built to handle a wide voltage range and inconsistent power conditions, with pure sine wave output on battery backup power — the same standard of clean power larger, more expensive UPS units offer, brought down to a size and price point that fits SMB budgets.

This 3kVA line-interactive tower UPS is ideal for business PCs and workstations, small offices, server rooms, audio/video systems, and retail point-of-sale systems — the exact mix of equipment a growing small business typically needs to protect, often all plugged into the same power circuit.

Real Numbers Behind the Protection

The SMV3000AI-MS delivers an output power capacity of 2.1kWatts / 3.0kVA, with a nominal output voltage of 230V, output frequency of 50/60Hz ±1Hz, and a load crest factor of 3:1. On the input side, it accepts a wide voltage range of 157–303V, with output configurable across 220–240V — real tolerance for unstable grid conditions rather than a narrow operating window that trips into battery mode at the slightest fluctuation.

Runtime scales predictably with load — at a full 100% capacity load, the unit provides roughly 2 minutes and 25 seconds of runtime, giving you a clear, honest picture of what to expect at maximum draw, with meaningfully longer runtime available at more typical partial loads.

Automatic Voltage Regulation Without the Battery Drain

Like other members of the Easy UPS line, the SMV3000AI-MS doesn’t treat every voltage hiccup as an emergency. Automatic Voltage Regulation (AVR) automatically steps up low voltage and steps down high voltage to levels suitable for your equipment — correcting common sags and surges in real time without switching to battery power, which both protects connected equipment immediately and preserves battery life for genuine outages.

The unit is also cold-start capable, providing temporary battery power even when utility power is already out, useful in scenarios where you need to bring equipment online before grid power has been restored.

Universal Outlets: Genuinely Practical Flexibility

The defining feature that gives this model its name is right there in the outlet design. It offers 6 universal receptacles on battery backup, meaning it accommodates a range of plug types without requiring separate adapters for every device — genuinely useful in businesses running a mix of equipment from different manufacturers or regions. The plug-and-play unit comes with an IEC 320 C20 input connection, keeping the input side standardized even while the output stays flexible.

Clear Status, Clean Power, Generator-Ready

An LCD graphics display shows text and mimic diagrams for modes of operation, system parameters, and alarms, so status is always visible at a glance. Pure sine wave output on battery backup simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics — meaning modern equipment with active power factor correction runs exactly as it would on clean utility power, even during a battery event.

For businesses that pair UPS protection with backup generation, the unit is generator compatible, allowing it to be adapted for optimal performance in specific power environments or generator applications.

Management and Peace of Mind

The line-interactive UPS supports communication interfaces like USB and RS-232 for monitoring and management, giving IT staff real visibility without needing to be physically present at the unit. The Easy UPS and its built-in lead-acid battery are covered by a 2-year warranty, and it’s compatible with the replacement battery APCRBCV209 when the time eventually comes to refresh it — a straightforward, cost-effective path to extending the unit’s useful life well beyond the original battery.

The Bottom Line

The APC Easy UPS SMV3000AI-MS is built around a simple but genuinely useful idea: small and medium businesses need serious voltage regulation and clean power protection, but they also need flexibility for the mixed bag of equipment a real office actually runs. With universal outlet compatibility, AVR-based protection, pure sine wave output, and straightforward USB/RS-232 management, it delivers exactly that — dependable, adaptable power protection sized and priced for the businesses that need it most.

CONTACT US @ TIACO TECHNOLOGIES.

Rack-Ready Power Protection: The APC Smart-UPS C 1500VA LCD RM 2U (SMC1500I-2U)

Not every server room is a sprawling data center, but that doesn’t make its equipment any less critical. The APC Smart-UPS C 1500VA LCD RM 2U (SMC1500I-2U) takes the trusted reliability of APC’s Smart-UPS C line and packages it specifically for the rack — giving small and medium businesses a clean, integrated way to protect servers, network gear, and point-of-sale systems without a tower unit taking up floor space.

Built for the Modern Rack

The SMC1500I-2U is, first and foremost, a rack solution. It’s a 2U rack-mountable line-interactive UPS providing power protection for small to medium business IT equipment, offering 1500VA/900W capacity and pure sine wave output. That pure sine wave output matters in a rack environment especially — it’s designed for entry-level servers and network equipment and is compatible with today’s active PFC power supplies, the kind increasingly standard in modern multi-core and virtualized servers. Smart-UPS units are known for their efficiency across load levels, making them ideal for virtualized or multi-core servers with variable power needs — precisely the equipment most small business racks are built around today.

Real Runtime Numbers for Real Planning

Knowing exactly how much time you have during an outage lets you plan rather than react. At full load, backup runtime is approximately 9 minutes; at half load, that extends to around 31 minutes, with a typical battery recharge time of about 3 hours. That’s enough headroom to complete a controlled shutdown of rack equipment or ride out a short outage entirely, without the unit taking up more rack space than its 2U footprint demands.

Automatic Voltage Regulation That Actually Protects Your Battery

Like other members of the Smart-UPS C family, the SMC1500I-2U doesn’t wait for a full outage to start protecting your equipment. Its Automatic Voltage Regulation (AVR) stabilizes voltage fluctuations, while the intuitive graphic LCD display offers real-time status updates. Because AVR corrects everyday sags and surges without switching to battery power, your battery is reserved for genuine outages rather than being drained by routine grid noise — meaningfully extending its useful life.

Efficiency is built in at the operating-mode level too. Green mode is a patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection, and high online efficiency reduces utility costs and generates less heat — a genuine advantage in a rack where excess heat means more strain on cooling systems. The unit is also cold-start capable, meaning it can provide temporary battery power even when utility power is already out, useful if you ever need to bring equipment online during an active outage.

Connections and Management Built for IT Environments

The SMC1500I-2U features four IEC C13 outlets, USB and serial connectivity, and compatibility with APC PowerChute software, ensuring seamless management and monitoring. That PowerChute integration is worth highlighting: the included PowerChute Business Edition software supports major server operating systems, providing UPS management and secure shutdown — so if utility power stays down past your available runtime, connected servers can shut down gracefully and automatically rather than losing power mid-operation.

The unit measures 3.3 inches high, 17 inches wide, and 26.3 inches deep, sized precisely for standard 19-inch rack installation, and its 4x IEC 320 C13 receptacles give you flexibility for a genuine mix of connected equipment.

Clear, At-a-Glance Status

The LCD isn’t just decorative — it’s genuinely functional. The LCD status display provides key UPS status at a glance, with multiple status indicators including load and battery bar graphs, so a quick look tells you exactly how the unit is performing without digging through a menu or a separate monitoring dashboard.

Backed by Real Support

The SMC has a built-in lead-acid battery and is covered by a 2-year UPS warranty, and because it’s part of the broader Smart-UPS C family, it’s compatible with genuine APC replacement battery cartridges that restore the unit to original performance specifications once the internal battery eventually ages out — a straightforward, cost-effective way to extend its service life well beyond that initial warranty period.

The Bottom Line

For small and medium businesses running servers, network switches, or point-of-sale systems out of a compact rack, the APC Smart-UPS C 1500VA LCD RM 2U (SMC1500I-2U) delivers exactly the right balance: genuine AVR-based power conditioning, pure sine wave output built for modern active-PFC equipment, PowerChute-managed graceful shutdown, and a form factor that fits neatly into the rack space you already have. It’s dependable, rack-native power protection without unnecessary complexity — precisely what a growing IT environment needs.

CONTACT US @ TIACO TECHNOLOGIES.

The Middle Ground That Doesn’t Compromise: The APC Easy UPS On-Line SRV3KIL

Choosing a UPS often feels like a balancing act between capacity, runtime, and cost — buy too little and you’re gambling on outages; buy too much and you’re paying for capability you’ll never use. The APC Easy UPS On-Line SRV3KIL sits at a genuinely useful middle point: real 3kVA double-conversion protection, scalable runtime, and enterprise-grade features, sized right for the servers, network gear, and edge equipment that make up most small-to-medium IT environments.

Genuine Double-Conversion, Not a Compromise

At its core, the SRV3KIL doesn’t cut corners on protection quality just because it’s a mid-sized unit. It’s a high-quality, double-conversion online UPS designed for essential power protection needs even in the most unstable power conditions, and it’s a high-performance double-conversion online uninterruptible power supply engineered to protect servers, networking gear, storage systems, and other business-critical loads from power outages, surges, and voltage fluctuations. It delivers clean sine-wave output, wide input voltage tolerance, and robust battery backup to keep IT and edge environments running smoothly during power disturbances.

The technical specifications reflect real engineering, not marketing shorthand: it operates on a topology of double-conversion online with true sine wave output, a nominal output voltage of 230V (also supporting 220V and 240V), output frequency synchronized to mains at 50/60Hz ±3Hz, a load crest factor of 3:1, nominal input voltage of 230V, and an input frequency range of 40–70Hz — tolerance that matters enormously in regions where grid frequency and voltage aren’t always stable.

Real Output Capacity for Real Loads

The SRV3KIL delivers an output power capacity of 2.4kWatts / 3.0kVA, with connections built for a genuine mix of equipment: 6 IEC 320 C13 outlets and 1 IEC 320 C19 outlet, all on battery backup, giving you room for both standard servers and higher-draw equipment on a single unit. At a practical load level, the unit provides roughly 20 minutes of runtime at 70% load — enough time for an orderly shutdown sequence or to bridge a short outage entirely.

Scalable Runtime for Longer Outages

Like the rest of the SRV On-Line family, the SRV3KIL doesn’t lock you into a single runtime figure. Up to 4 external battery modules (SRV72BP-9A) can be added for longer power availability, letting you tailor backup time to how long an outage realistically might last in your environment rather than accepting whatever the base unit happens to offer. This scalable runtime capability fulfills the needs of long-runtime applications, and the unit is also generator compatible, ensuring clean, uninterrupted power to connected loads during an extended power outage — a genuinely important detail for facilities that pair UPS protection with backup generation.

Efficient and Battery-Smart

Efficiency and battery longevity aren’t afterthoughts here. ECO Mode / Green Mode is an energy-saving mode where the input voltage regulation range can be set or modified directly through the LCD display, and intelligent battery management maximizes battery performance, life, and reliability through intelligent precision charging. A high power factor also means more of the UPS’s rated capacity is delivered as usable real output power — you’re not paying for capacity you can’t actually use.

Monitoring and Fail-Safe Design

The SRV3KIL is built for visibility, not guesswork. It offers LED status indicators to quickly understand unit and power status, an LCD graphics display showing text and mimic diagrams for modes of operation, system parameters, and alarms, and a SmartSlot that lets you customize the UPS’s capabilities with optional management cards. Disconnected battery notification warns you when a battery isn’t available to provide backup power, and automatic self-test performs periodic checks to ensure early detection of a battery that needs replacing — problems get caught before they become failures.

Connectivity is comprehensive too: USB connectivity provides management of the UPS via a USB port, serial connectivity allows management via a serial port, and the unit is network manageable, offering remote power management options over the network.

Compact, Flexible, and Ready to Deploy

The compact form factor allows for flexible placement, whether that’s a server room floor, an equipment closet, or an edge deployment site with limited space. It ships complete with a basic UPS signalling RS-232 cable, software CD, country-specific detachable power cord, DC cable, USB cable, and user manual — everything needed to get it running the same day it arrives.

Backed by a Real Warranty

The SRV3KIL carries a 2-year repair or replace warranty, giving you tangible assurance behind the specifications rather than just promises on a spec sheet.

The Bottom Line

The APC Easy UPS On-Line SRV3KIL fills a genuinely useful spot in the power protection landscape — real double-conversion topology, meaningful output capacity, and scalable runtime, all in a compact, flexible tower unit that doesn’t demand enterprise-level complexity or cost. For small data centers, server rooms, and edge IT deployments that need dependable, uncompromised protection sized right for the job, this is a UPS built to do exactly that — no more, no less.

CONTACT US @ TIACO TECHNOLOGIES.

Right-Sized Reliability: The APC Easy UPS On-Line SRV2KIL

Not every critical load needs a rack full of power protection — sometimes what you’re safeguarding is a single server, a piece of network storage, or a compact telecom cabinet, and what you need is a UPS that matches that scale without compromising on protection quality. The APC Easy UPS On-Line SRV2KIL delivers genuine double-conversion reliability at 2000VA, built specifically for that kind of focused, essential deployment.

Small Footprint, Real Online Protection

Don’t mistake the SRV2KIL’s compact size for reduced capability. This 2000VA double-conversion on-line tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions, and it’s engineered specifically as a 2000VA/1600W double-conversion on-line pure sine wave tower UPS. That’s true online double-conversion technology at this size — not a scaled-down, line-interactive compromise — meaning connected equipment receives continuously regenerated clean power rather than power that’s simply corrected after a disturbance is already underway.

This APC single-phase Easy UPS is designed for IT professionals and network administrators who need to maintain business uptime and continuity, and its ideal use cases reflect that focus: it’s a strong fit for small data centers, manufacturing facilities, computer rooms, network storage devices, telecommunication equipment, and healthcare IT — environments where a single point of failure can have an outsized impact despite the modest overall power draw.

Connections Built for Practical Use

The SRV2KIL keeps its physical connections simple and standardized. It comes with an IEC 320 C14 input and 3x IEC 320 C13 outlets, according to some configurations, while other listings note 4 IEC 60320 C13 outlets on battery backup, a nominal 230V output and input, and a 1.5-meter input cord. Either way, the outlet layout is designed around the standard IEC connectors already used by servers, network switches, and storage devices — no adapters or proprietary connectors required.

Extended Runtime That Scales With You

Like its larger siblings in the SRV On-Line family, the SRV2KIL’s real advantage is extendable runtime. You can add up to 4 external battery packs (SRV72BP-9A) for extended runtime, letting you tailor backup time to the actual risk profile of what you’re protecting — whether that’s a brief bridge to generator power or genuine hours of coverage during an extended grid failure. That modularity means you’re never locked into a single runtime figure at the time of purchase; protection can grow as your requirements do.

Efficient, Monitored, and Fail-Safe by Design

Efficiency matters even at smaller capacities, and the SRV2KIL doesn’t cut corners here either. It delivers high operating efficiency through energy-saving ECO Mode, reducing wasted energy during normal, healthy grid conditions without sacrificing the protection the unit provides. An easy-to-read LCD interface provides detailed and accurate information on UPS status, so you always know exactly what state the unit — and your protected equipment — is in.

Reliability is reinforced by real fail-safes. Built-in automatic and manual bypass provides seamless power to the load even in the event of an internal detected fault or error in the UPS, meaning a problem with the UPS itself doesn’t automatically translate into a problem for the equipment it’s protecting. More specifically, a pure static bypass switch, rated for 125% of nominal load, secures a fast and reliable transfer to and from bypass without a bridging contactor, and automatic restart of loads after UPS shutdown means connected equipment starts back up automatically the moment utility power returns — no manual intervention required.

Ready for Networked Management

Even at this smaller capacity, the SRV2KIL is built to integrate into a properly managed IT environment rather than operate as an isolated box. It has an intelligent card slot for an optional Network Management Card (AP9544, SRVSMB001, or VGL9601l) that enables network-based UPS monitoring and management, and the UPS can connect to EcoStruxure IT or third-party centralized management platforms — the same management ecosystem used across APC’s larger UPS lines, so it fits naturally alongside bigger units elsewhere in your infrastructure.

Backed by a Genuine Warranty

The UPS and its built-in lead-acid battery are covered by a 2-year warranty, giving you real assurance rather than just a specification sheet full of promises.

The Bottom Line

Small deployments deserve serious protection too, and the APC Easy UPS On-Line SRV2KIL delivers it — true double-conversion topology, scalable runtime via external battery packs, efficient ECO Mode operation, automatic bypass fail-safes, and full network management integration, all in a compact tower unit sized for exactly the kind of focused, essential loads that need it most. For small data centers, computer rooms, and network storage protection, it’s a right-sized answer to a problem that shouldn’t need an oversized solution.

CONTACT US @ TIACO TECHNOLOGIES.

Built for IT Professionals Who Can’t Afford Guesswork: The APC Easy UPS On-Line SRV6KIL

Server rooms and small data centers don’t need flashy features — they need power that’s clean, dependable, and backed by real runtime when the grid fails. The APC Easy UPS On-Line SRV6KIL delivers exactly that at the 6kVA tier, combining true double-conversion protection with the kind of scalable, extended battery runtime that turns a routine outage from a crisis into a non-event.

Real Double-Conversion Protection for Real-World Power Problems

The SRV6KIL is engineered specifically for environments where power quality can’t be taken for granted. APC’s Easy UPS 1 Ph Online line is a versatile, high-quality, cost-competitive UPS developed to handle a wide voltage range and inconsistent power conditions, delivering the kind of quality millions of IT professionals trust around the world. Designed for IT professionals and network administrators focused on maintaining business uptime and continuity, this 6kVA double-conversion online tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions.

That last point matters more than it might seem — a true sine wave output, rather than a stepped approximation, protects sensitive server and networking hardware from the kind of subtle electrical stress that cheaper UPS technology can introduce over time.

Genuinely Flexible on Voltage

Grid conditions vary widely by region, and the SRV6KIL is built to adapt rather than demand a perfect environment. It supports a main input voltage of 230V with compatibility for 220V and 240V, and the output voltage is similarly configurable for 220V, 230V, or 240V, ensuring seamless integration into diverse power setups. Beyond simple voltage flexibility, it accepts a wide input voltage range of 110–300V, providing stable power even in areas with fluctuating grid conditions — a genuinely important feature for facilities operating on less-than-pristine utility power.

Scalable Runtime, Built for Growth

What sets the SRV6KIL apart is how far its runtime can be pushed. To meet extended uptime requirements, this Easy UPS allows users to connect up to four external battery packs (SRV240BP-9A), giving organizations real flexibility to scale protection based on how long an outage might realistically last in their environment. This modular battery support ensures scalability based on runtime needs, giving organizations the flexibility to protect mission-critical systems during prolonged outages — rather than being stuck with a single fixed runtime figure that may or may not match your actual risk.

On the hardware side, the battery system is built for durability: it operates at a battery voltage of 240V, with a battery recharge time of 5 hours and an expected lifespan of 3 to 5 years. The unit also delivers an impressive 94% efficiency at full load, meaning less energy wasted as heat and lower operating costs over the life of the system.

Management That Fits Into Your Existing Workflow

A UPS protecting critical infrastructure needs to be visible to the people managing that infrastructure, and the SRV6KIL is built with that in mind. It has an intelligent card slot for an optional Network Management Card (AP9544, SRVSMB001, or VGL9601l) that enables network-based UPS monitoring and management, and the unit can connect to EcoStruxure IT or third-party centralized management platforms — meaning it slots directly into whatever monitoring stack your team already relies on rather than becoming an isolated blind spot.

Installation is also refreshingly straightforward for professional environments: the SRV6KIL comes with hard-wire 3-wire (1P+N+E) input and hard-wire 3-wire (P+N+E) output, giving electricians a clean, standardized way to integrate it into a facility’s wiring rather than relying on consumer-style plugs.

Smart Features That Protect Both Uptime and Budget

Several built-in features reduce both risk and cost over the long run. A pure static bypass switch, rated for 125% of nominal load, secures a fast and reliable transfer to and from bypass without a bridging contactor, and automatic restart of loads after UPS shutdown means connected equipment automatically starts back up the moment utility power returns — no manual intervention required after an outage clears.

ECO Mode bypasses unused electrical components during good power conditions to achieve high operating efficiency without sacrificing protection, and the product has a power-factor-corrected input side ensuring the input power factor stays at 1 regardless of load and mains voltage — a detail that translates directly into lower installation costs, since it allows the use of smaller generators and lighter-gauge cabling. For facilities with strict safety protocols, the unit can also be connected to an Emergency Power Off (EPO) system.

Ready Out of the Box

The SRV6KIL ships complete with a USB cable, RS-232 configuration cable, external battery pack, battery cable, and user manual — everything needed for integration into a managed IT environment from day one, with no separate accessories to track down.

The Bottom Line

For server rooms, small data centers, and enterprise applications where uptime isn’t negotiable, the APC Easy UPS On-Line SRV6KIL offers a genuinely compelling combination: true double-conversion protection, wide voltage tolerance, scalable battery runtime up to four external packs, and network management that fits into existing IT workflows. It’s built by people who understand that IT professionals don’t want to gamble on power quality — they want a UPS that simply, reliably does its job.

CONTACT US @ TIACO TECHNOLOGIES.

When Every Minute of Runtime Counts: The APC Easy UPS On-Line SRV10KIL

Some environments don’t just need protection from a five-minute outage — they need the confidence that comes with hours of runway if the power stays down. The APC Easy UPS On-Line SRV10KIL was built for exactly that gap: full double-conversion protection at 10kVA, paired with an external battery pack that turns a brief bridge into serious, extended backup time.

Genuine Online Protection, Even in Unstable Power Conditions

The SRV10KIL doesn’t cut corners on topology. It’s a high-quality, double-conversion online UPS designed for essential power protection needs even in the most unstable power conditions — precisely the scenario where lesser UPS technology tends to struggle. Because it’s true double conversion rather than line-interactive, your connected equipment receives continuously regenerated power at all times, not power that’s simply monitored and corrected after a disturbance is detected.

The specifications back up that reliability. It delivers 10.0kW/10.0kVA of output power capacity, with a nominal output voltage of 230V (also supporting 220V and 240V), a load crest factor of 3:1, and true double-conversion online topology producing a clean sine wave output. On the input side, it accepts a wide 40–70Hz frequency range and nominal 230V (with 220V/240V flexibility), connecting via hard-wire 3-wire (1P+N+E) input — the kind of tolerance that matters enormously in regions where grid frequency and voltage aren’t always textbook-stable.

Extended Runtime, Built Into the Name

What sets the SRV10KIL apart from a standard 10kVA UPS is right there in its description: extended runtime via an external battery pack. With the additional external battery pack, the unit can provide up to 7 hours of runtime — a dramatic leap beyond the few minutes typical internal-battery UPS units offer. That kind of runway changes what’s actually possible during an outage: instead of a rushed shutdown sequence, you get real operational continuity, whether that means running critical systems through an extended grid failure or simply having enormous peace of mind that a short blip will never become an emergency.

The battery itself uses a maintenance-free, sealed lead-acid design with suspended electrolyte construction, making it leakproof — engineered for safe, low-maintenance operation even when installed in the kind of always-on server room or equipment closet where you’d rather not think about battery upkeep at all.

Smart Features That Reduce Risk and Cost

Beyond raw runtime, the SRV10KIL includes a set of features aimed squarely at reliability and lowering total cost of protection. Automatic internal bypass supplies utility power directly to connected loads in the event of a UPS overload or fault, ensuring your equipment doesn’t simply lose power because the UPS itself hit a limit. A pure static bypass switch, rated for 125% of nominal load, secures a fast and reliable transfer to and from bypass without a bridging contactor — a detail that matters when milliseconds separate clean power from a hard interruption.

Automatic restart of loads after UPS shutdown means connected equipment starts back up automatically the moment utility power returns, removing the need for someone to manually power everything back on after an outage. ECO Mode bypasses unused electrical components during good power conditions to achieve high operating efficiency without sacrificing protection, and input power factor correction minimizes installation costs by allowing the use of smaller generators and cabling — a genuinely practical benefit for any facility pairing the UPS with generator backup.

For facilities with strict safety requirements, the unit can be connected to an Emergency Power Off (EPO) system, allowing power to be cut immediately in an emergency situation. And on the battery side, intelligent battery management maximizes battery performance, life, and reliability through intelligent charging, extending the useful life of the investment rather than letting the battery degrade prematurely.

Physical Specs and What’s in the Box

The unit measures roughly 46cm x 58cm x 57cm and weighs approximately 76.5kg — substantial, purpose-built hardware rather than a compact desktop accessory, reflecting the serious capacity it delivers. It arrives ready to integrate into a managed environment: the package includes a DC cable, a basic UPS signalling RS-232 cable, a CD with software, a USB cable, and a user manual, giving you everything needed for monitoring and control from day one.

Backed by Real Confidence

The SRV10KIL includes an LCD display, alarm functions, built-in surge protection, and a 2-year warranty — a combination that reflects genuine confidence in the unit’s long-term reliability, not just its specifications on paper.

The Bottom Line

For server rooms, network closets, and small-to-medium facilities where a brief power blip simply isn’t the only scenario you need to plan for, the APC Easy UPS On-Line SRV10KIL offers something most UPS units at this size can’t: genuine double-conversion protection paired with hours, not minutes, of real runtime. Add in automatic bypass, EPO integration, intelligent battery management, and a solid warranty, and you have a UPS built not just to survive an outage, but to make an extended one a non-event.

CONTACT US @ TIACO TECHNOLOGIES.

Serious Power for Serious Infrastructure: The APC Easy UPS 3S 40kVA (E3SUPS40KHB1)

At 40kVA, a UPS stops being a background convenience and becomes central infrastructure — the thing standing between a stable operation and a genuinely costly outage. The APC Easy UPS 3S 40kVA (E3SUPS40KHB1) is built for exactly that role: substantial three-phase power protection for environments where downtime isn’t an inconvenience, it’s a real financial and operational risk.

Capacity Built for Critical Applications

This is not an entry-level unit. The E3SUPS40KHB1 is a high-capacity, three-phase uninterruptible power supply designed for critical applications where robust power protection and reliability are essential, and it’s suitable for medium to large-sized data centers, industrial environments, and other facilities requiring substantial power backup and stability. At the 40kVA tier, it provides significant power capacity, capable of supporting large loads including multiple servers, networking equipment, and other critical infrastructure — the kind of consolidated load you’d find protecting an entire rack row rather than a single cabinet.

Its versatility across industries is notable. It’s a fit for data centers, industrial environments, commercial buildings, healthcare facilities, financial institutions, and telecommunications — sectors where the cost of unplanned downtime is measured not just in inconvenience but in lost revenue, compliance exposure, or worse. That breadth speaks to how seriously this unit is engineered: it’s built to the standard those industries actually require.

True Double-Conversion, Three-Phase Throughout

The E3SUPS40KHB1 delivers a rated 40kW of effective power and 40kVA of apparent power, using genuine double-conversion (online) technology, with three-phase input and three-phase output — meaning connected equipment receives continuously regenerated, clean power rather than power that’s merely monitored and corrected after a problem occurs. That distinction is what separates a true online UPS from cheaper interactive alternatives, and at 40kVA of capacity, it’s exactly the level of protection large infrastructure deployments require.

Runtime That Scales With Your Load

Runtime on a UPS this size isn’t a single number — it depends directly on how much of its capacity you’re actually using, and the E3SUPS40KHB1 is transparent about that relationship. At a full 40kW load, runtime is approximately 5.2 minutes; at 30kW it extends to roughly 8.4 minutes; and at 20kW load, runtime reaches approximately 15 minutes. That scaling gives you a real, practical planning tool: the less of the UPS’s total capacity your equipment draws, the more time you have to execute an orderly shutdown or wait for backup generation to engage.

And like the rest of the Easy UPS 3S family, runtime isn’t fixed at purchase. This version includes 3 internal 7Ah modular battery strings, expandable to 4 strings for extended runtime, so as your critical load or required bridge time grows, the system can grow with it rather than requiring a full UPS replacement.

Connectivity Built for Integration, Not Isolation

A UPS protecting infrastructure this important needs to talk to the rest of your monitoring and management stack, and the E3SUPS40KHB1 is equipped for it. It includes serial RS232, RS485, and USB interfaces, along with dry contacts, giving IT and facilities teams multiple ways to integrate it into existing monitoring systems. For centralized oversight, an available SNMP card lets you monitor and manage UPS status remotely through the UPS web interface or through EcoStruxure IT’s cloud-based and on-premise software suites — meaning this unit doesn’t have to operate as an isolated island of infrastructure. It becomes a visible, managed part of your broader operations.

Hardened for Real Facility Conditions

Like other members of the Easy UPS 3S line, it includes a dust filter and conformance-coated boards for harsh environments, protecting internal electronics from the dust, humidity, and temperature swings that are common in industrial settings and less-than-pristine electrical rooms — exactly the kind of environments where 40kVA-class deployments often live.

Easy to Deploy, Serious in Capability

Despite the substantial capacity, the installation and operating philosophy stays true to the Easy UPS 3S name.It’s engineered to be easy to install, easy to operate, easy to maintain, and easy to service as a 40kVA, 400V three-phase UPS, with advanced product features, competitive specifications, and robust electrical design that make business continuity easy for small and medium data centers and electrical rooms. That combination — real enterprise-tier capacity without an enterprise-tier deployment burden — is precisely what makes this unit a practical choice for growing organizations rather than only the largest data center operators.

The Bottom Line

When 40kVA of continuous, clean power stands between your operation and a costly outage, you need genuine double-conversion reliability, scalable runtime, and real integration with the systems your team already monitors. The APC Easy UPS 3S 40kVA (E3SUPS40KHB1) delivers all three, in a package still built around the straightforward installation and service philosophy that defines the Easy UPS 3S line. For data centers, healthcare facilities, financial institutions, and industrial operations that simply cannot afford unplanned downtime, this is power protection sized for the job.

CONTACT US @ TIACO TECHNOLOGIES.

Scaling Up Business Continuity: The APC Easy UPS 3S 30kVA (E3SUPS30KHB1)

As data centers and electrical rooms grow, their power protection needs to grow with them — without demanding a specialist team just to keep it running. The APC Easy UPS 3S 30kVA (E3SUPS30KHB1) is built for exactly that transition point: serious three-phase double-conversion capacity for small and medium businesses that are scaling up, wrapped in a system still designed around genuine simplicity.

Enterprise-Grade Protection, Right-Sized

At its core, this is a full online double-conversion UPS, not a stepped-down compromise. It uses genuine online double-conversion technology, continuously regenerating clean power for connected equipment rather than reacting to problems after they occur. Its output power capacity reaches 30.0kW/30.0kVA, running on a nominal 400V three-phase output that matches a nominal 400V three-phase input, with a maximum input current of 55.0A — real headroom for a growing rack environment, electrical room, or small data center that’s outgrown a smaller UPS tier.

Power quality holds up to genuinely demanding standards. Output voltage total harmonic distortion stays under 3% under linear load, with output voltage tolerance held within ±1.5% — numbers that matter enormously to sensitive server and networking equipment, which can be gradually damaged or destabilized by dirty, poorly regulated power even when an outright outage never occurs.

Runtime and Battery Configuration Built for Flexibility

The E3SUPS30KHB1 comes ready to protect from day one. This version ships with internal batteries providing approximately 9 minutes of runtime at full load — enough to bridge a short blip or begin an orderly shutdown sequence the moment utility power fails. It includes 2 internal 7Ah modular battery strings, expandable up to 4 strings, so if your runtime needs grow later, you’re not stuck buying an entirely new UPS — you’re simply adding battery capacity to the system you already have.

That flexibility matters because runtime requirements are rarely one-size-fits-all. A short bridge to generator power calls for a very different battery configuration than a facility that needs 20+ minutes to gracefully shut down a full rack of virtualized servers — and the modular design means the E3SUPS30KHB1 can be tuned to either scenario rather than forcing a compromise.

Real Protection Against Real-World Grid Problems

A UPS is only as good as its ability to handle actual grid conditions, not idealized ones. The unit provides a maximum available short-circuit current of 10kA, giving it robust protection against serious electrical fault conditions rather than just everyday sags and surges. Combined with its double-conversion topology, that means connected equipment stays isolated from grid instability whether the problem is a minor brownout or a significant electrical fault.

Built for Environments That Aren’t Always Ideal

Like the rest of the Easy UPS 3S family, the 30kVA model is engineered to keep performing outside of pristine, climate-controlled server rooms. It includes conformance-coated boards for harsh environments and a dust filter — details that meaningfully extend service life in facilities with less-than-perfect air quality, humidity, or ambient temperature control.

Genuinely Easy to Live With

The “Easy” branding reflects real engineering choices, not just marketing language. It’s described as exceptionally easy to install, operate, maintain, and service — ideal for small and medium businesses scaling up their infrastructure, and its advanced features, competitive specifications, and robust electrical design are specifically aimed at making business continuity easy in the data center or electrical room. For growing organizations without a dedicated power-systems engineer on staff, that reduced complexity translates directly into faster deployment and lower ongoing maintenance burden.

Connectivity for larger deployments is also built in from the start — the unit includes interface ports for parallel operation and temperature sensor integration, meaning it’s ready to scale into multi-unit configurations or integrate with broader environmental monitoring as your facility’s needs expand.

Who Should Be Looking at This Unit

If your organization has outgrown a 10 or 20kVA UPS — or is planning infrastructure that will — the 30kVA tier of the Easy UPS 3S line is the natural next step. It’s purpose-built for small and medium data centers, electrical rooms, and commercial facilities that need genuine three-phase double-conversion protection at a meaningfully larger capacity, without jumping straight to complex, high-maintenance enterprise systems designed for much larger operations.

The Bottom Line

Growth shouldn’t mean starting your power protection strategy over from scratch. The APC Easy UPS 3S 30kVA (E3SUPS30KHB1) delivers real double-conversion protection at genuine three-phase capacity, expandable battery runtime that grows alongside your needs, and hardened components built for real-world facility conditions — all without sacrificing the straightforward installation and maintenance the Easy UPS 3S line is known for. For a business scaling its infrastructure and refusing to compromise on uptime, this is a UPS built to grow right alongside you.

CONTACT US @ TIACO TECHNOLOGIES.

Business Continuity, Simplified: The APC Easy UPS 3S 20kVA (E3SUPS20KHB1)

Small and medium data centers face a genuine dilemma when it comes to backup power: they need the same double-conversion reliability that large enterprise facilities rely on, but without the complexity, footprint, and commissioning overhead that typically comes with it. The APC Easy UPS 3S 20kVA (E3SUPS20KHB1) was built to close exactly that gap — enterprise-grade protection, delivered in a package designed to be genuinely easy.

Real Double-Conversion Protection

Don’t let the friendly name fool you — this is a serious online UPS. It’s a high-efficiency, double-conversion online UPS built for maximum business continuity in demanding environments, delivering a reliable 20kVA/20kW of output power for small to medium data centers, commercial buildings, and electrical rooms. That means your connected equipment is continuously protected from voltage sags, surges, and outages — not just covered after the fact once a problem is detected.

The numbers reflect genuine engineering discipline, not just marketing copy. Output voltage distortion stays under 3% even under linear load, output voltage tolerance holds within ±1.5%, and the input power factor at full load reaches 0.99 — meaning very little energy is wasted and the power reaching your equipment stays exceptionally clean. The unit tolerates an input voltage range of 304 to 477V for main operations and an input frequency range of 45 to 65Hz, giving it real resilience against the kind of grid instability that trips up less capable systems.

Three-Phase Power, Built for 400V Environments

This is a genuine three-phase unit designed for serious infrastructure loads. Input voltage runs 380–415V across three primary phases, with matching 380–415V output across three secondary phases, and support for both 50Hz and 60Hz operation — making it a natural fit for facilities running standard 400V three-phase distribution, whether in a purpose-built data center or a commercial electrical room.

Runtime and Battery Flexibility

Out of the box, the E3SUPS20KHB1 is ready to bridge real outages. It ships with internal batteries providing roughly 15 minutes of runtime at full load — enough time to gracefully shut down connected systems or bridge the gap until a generator takes over. And it’s not locked into that runtime permanently: it includes 2 internal 7Ah modular battery strings, expandable to 3 strings for extended runtime, so as your uptime requirements grow, the UPS can grow with them rather than forcing a replacement.

Engineered for Environments That Aren’t Always Kind

Data centers and electrical rooms aren’t always pristine, climate-controlled spaces, and the Easy UPS 3S is built with that reality in mind. It includes a dust filter and conformance-coated boards specifically to perform reliably in harsh environments — a detail that matters enormously in facilities with less-than-ideal air quality or humidity control, where a lesser UPS’s electronics might degrade prematurely.

True to Its Name: Genuinely Easy

The “Easy” in Easy UPS 3S isn’t just branding — it reflects real design choices aimed at reducing the time and expertise needed to get the unit running. It offers plug-and-play installation with minimal setup time and intuitive controls, whether you’re integrating it into a new system or replacing an older UPS, and its advanced product features, competitive specifications, and robust electrical design are built specifically to make business continuity easy for small and medium data centers and electrical rooms. For IT and facilities teams without a dedicated power-systems specialist on staff, that reduction in commissioning complexity is a genuine, practical advantage — not just a convenience.

Confidence Backed by Real Support

A UPS this central to your operations deserves a warranty that matches its importance. The Easy UPS 3S comes with a 2-year on-site repair or replace warranty, including factory-authorized start-up services, backed by Schneider Electric’s global support network. That combination — genuine on-site service plus a worldwide support infrastructure — means you’re never left troubleshooting a critical power failure alone.

The Bottom Line

Small and medium data centers shouldn’t have to choose between enterprise-grade double-conversion protection and a manageable installation and maintenance burden. The APC Easy UPS 3S 20kVA (E3SUPS20KHB1) delivers both: clean, tightly regulated three-phase power, expandable battery runtime, hardened components for harsh environments, and an installation experience genuinely designed around simplicity. For any commercial building, electrical room, or growing data center that needs serious power protection without a serious learning curve, this is a UPS built to make business continuity exactly what its name promises — easy.

CONTACT US @ TIACO TECHNOLOGIES.

Simple, Reliable, and Built for the Rack: The Case for the APC AP9559 Basic Rack PDU

Not every rack needs remote switching, network monitoring, or a management dashboard. Sometimes what you actually need is dependable, high-quality power distribution that just works — outlet after outlet, year after year, without adding another system to configure and maintain. That’s precisely the niche the APC AP9559 Basic Rack PDU fills, and it fills it extremely well.

Straightforward Power Distribution Done Right

The AP9559 doesn’t try to be more than it is, and that’s its strength. It’s a basic rack PDU with a 1U horizontal mounting design, supporting a maximum input current of 16A and operating at both 208V and 230V — the two voltage standards most common in enterprise and data center environments worldwide. That dual-voltage support alone makes it a flexible choice for organizations operating across regions or preparing infrastructure that might move between facilities.

In practical terms, it distributes up to 3.68kVA from a single feed across twelve outlets, giving you real capacity to power a meaningful cluster of rack-mounted equipment from one unit — no daisy-chaining strips together or juggling multiple power feeds for a single shelf of gear.

Outlet Variety That Matches Real Equipment

Not all rack equipment uses the same power connector, and the AP9559 accounts for that from the start. It features 10 IEC 60320 C13 outlets and 2 IEC 60320 C19 outlets, providing flexibility for connecting various types of IT equipment. The C13 outlets comfortably handle servers, switches, and standard networking gear, while the two higher-capacity C19 outlets are ready for power-hungry devices — larger servers, storage arrays, or blade enclosures — that draw more current than a standard C13 connection is rated for. That mix means you rarely need a separate PDU just to accommodate one oddly-powered device.

Built for Simple, Fast Installation

Getting a PDU into a rack shouldn’t be a project of its own, and APC clearly designed the AP9559 with that in mind. It includes a toolless mounting kit for quick setup, and the package comes complete with rack mounting brackets and a user manual — everything needed to get it installed and powering equipment the same day it arrives. Its horizontal mounting design fits comfortably into a wide variety of rack configurations, so it slots easily into an existing layout rather than forcing you to redesign your rack around it.

Reach matters too, especially in deeper racks or when the input feed isn’t positioned conveniently. It includes an 8.2-foot power cord with an IEC 60320 C20 plug, giving installers real flexibility in routing power without needing extension cables or awkward cable management workarounds.

Compact and Unobtrusive

At just 1U, the AP9559 barely registers as rack space at all — the unit measures approximately 44.7cm wide, 4.4cm high, and 5.7cm deep, and weighs under a kilogram, leaving the rest of your rack free for the equipment that actually needs the room. For network closets, lab environments, or branch-office racks where every unit of rack space counts, that footprint is a genuine advantage.

Knowing When Basic Is the Right Choice

It’s worth being clear-eyed about what the AP9559 is — and isn’t. As its category name suggests, it’s intended for basic power distribution where advanced metering or switched control isn’t required, and it is not suitable for environments needing outlet-level switching, remote monitoring, or intelligent load management. If your environment genuinely needs remote power-cycling of individual devices or network-based alarm thresholds, APC’s switched PDU line is the better fit. But for the very large number of racks that simply need dependable, well-built power distribution without the added complexity, cost, and configuration overhead of a networked unit, that simplicity is exactly the point.

Built for the Environments That Need It Most

The AP9559 is designed for data center, lab, or branch racks requiring reliable AC power distribution, and fits comfortably into data centers, server rooms, and network closets alike. It’s the kind of hardware you install once, forget about, and simply trust to keep doing its job — which, for a huge share of rack deployments, is precisely what’s needed.

The Bottom Line

Not every power problem calls for a networked, feature-rich solution — sometimes the right answer is well-engineered simplicity. The APC AP9559 delivers exactly that: solid 16A dual-voltage capacity, a practical mix of C13 and C19 outlets, toolless installation, and a compact 1U footprint that disappears into your rack. For labs, branch offices, network closets, and any environment where dependable basic power distribution matters more than remote bells and whistles, the AP9559 is a smart, cost-effective choice that just works.

CONTACT US @ TIACO TECHNOLOGIES.