Powerful APC Back-UPS Pro 1500: Ultimate Protection

Power protection doesn’t have to push up your energy bill. The APC Power-Saving Back-UPS Pro BR1500GI provides 1500VA/865W of line-interactive battery backup at 230V. Its power-saving outlets cut off idle peripherals, so it suits home offices and small businesses that care about efficiency as much as reliability.

Introducing the BR1500GI

The BR1500GI belongs to APC’s Back-UPS Pro line, which protects computers, networking gear, game consoles, external storage, and other home and business electronics from power outages and surges. With 865W of real power, it can run a desktop PC, monitor, router, and a handful of peripherals together. It comes in a tower format with a user-replaceable battery.

Power-Saving Outlets on the BR1500GI

The power-saving outlets are the standout feature. When your main device, such as a PC, is switched off or goes to sleep, the BR1500GI automatically cuts power to connected peripherals such as printers and speakers. That removes standby power draw without anyone switching each device off by hand. The savings add up over time, especially in a home office.

Battery-Backed and Surge-Only Outlets on the BR1500GI

The unit has ten IEC C13 outlets: five battery-backed outlets with surge protection, and five surge-only outlets. Two IEC jumper cables are included for the battery-backed group. Put your PC and router on battery backup, and plug a printer or charger into the surge-only group so it doesn’t drain the battery during an outage. Transformer-block spacing leaves room for bulky adapters.

Voltage Regulation and Surge Protection with the BR1500GI

Automatic voltage regulation (AVR) corrects low voltages without discharging the battery, which preserves battery life and maximizes runtime. The input range is about 186V to 284V. A surge energy rating of 445 joules helps protect connected devices from damaging spikes. Output on battery is a stepped approximation of a sine wave, so check that your equipment is compatible with this type of output.

Battery Backup and Runtime on the BR1500GI

During an outage, the sealed 24V/9Ah battery gives enough runtime to save your work and shut down properly. Runtime depends on the connected load, and lighter loads last longer. The battery is user-replaceable, and a replacement cartridge (APCRBC124) restores the unit to its original performance. Battery life is typically 3 to 5 years.

LCD Display and Software on the BR1500GI

A multifunction LCD shows status and lets you adjust settings at the unit. A USB port connects to your computer, and PowerChute software is included for monitoring and automatic shutdown. Audible alarms warn of battery operation, low battery, and overload. Efficiency at full load is about 89%.

Ideal for Home Offices and Entertainment Setups: The BR1500GI

The BR1500GI suits home office computers, and it also suits home entertainment systems. Reducing the standby draw of peripherals such as speakers and set-top boxes brings noticeable savings over time. The tower measures about 30.1 x 11.2 x 38 cm and weighs about 12.7kg.

Who Should Choose the BR1500GI

The BR1500GI suits home office users, small business owners, and anyone who wants dependable UPS protection plus energy-saving features. It is especially appealing for people who want to cut standby waste from peripherals without giving up the reliability of a trusted battery backup. A 2-year warranty covers the unit.

Final Thoughts on the BR1500GI

Reliable protection and energy efficiency don’t have to be separate goals. The APC Power-Saving Back-UPS Pro BR1500GI combines smart power-saving outlets, battery-backed and surge-only outlets, AVR, and an informative LCD. For anyone who wants to protect equipment while being mindful of energy use, it is a smart, worthwhile investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Easy UPS SMV1000I-MS: Ultimate Protection

Small offices and light IT setups need power protection that is dependable and doesn’t force you to worry about plug compatibility. The APC Easy UPS SMV1000I-MS provides 1000VA/700W of line-interactive protection at 230V in a compact tower. It has four universal outlets and a pure sine wave output.

Introducing the SMV1000I-MS

The SMV1000I-MS is part of APC’s Easy UPS SMV series, designed for essential power protection in unstable power conditions. It suits business PCs and workstations, small offices, audio/video systems, and retail point-of-sale terminals. At 1000VA, it protects a small server, a few networking devices, or core office equipment, and its input accepts a wide voltage range.

Universal Outlet Design of the SMV1000I-MS

The unit has four universal battery-backup outlets that accept different plug types without separate adapters. That helps businesses that use equipment from multiple manufacturers, or that operate where plug standards differ. Setup is quicker and compatibility problems drop away. The input uses an IEC C14 connection.

Line-Interactive Protection with AVR in the SMV1000I-MS

The SMV1000I-MS uses automatic voltage regulation (AVR) to correct voltage sags and surges without switching to battery. Its input accepts about 165V to 290V, so it stays off battery through most swings and keeps battery capacity for real outages. When power fails, transfer to battery takes 2 to 6 ms typically. The pure sine wave output is gentle on sensitive electronics.

Battery Runtime and Safe Shutdown on the SMV1000I-MS

The 24V sealed lead-acid battery provides about 3 minutes at full load, about 6.5 minutes at 70% load, and about 11 minutes at half load. That is enough time to save work and shut down systems in a controlled manner, which matters in small offices without IT staff. The battery recharges in about 4 hours and typically lasts 3 to 5 years. A replacement cartridge (APCRBCV206) is available, and a cold-start function lets the unit power up on battery when the grid is down.

Display and Connectivity on the SMV1000I-MS

An easy-to-read LCD shows detailed, accurate UPS status. USB and serial ports support UPS management and monitoring software. Audible alarms warn of battery operation, low battery, and overload.

Power Rating of the SMV1000I-MS

With a 0.7 power factor, the 1000VA rating means 700W of real power. When you plan what to connect, keep the total load under both the VA and the watt figures. That covers a PC, a monitor, a router, and a few small peripherals.

Convenient, Compact Deployment: The SMV1000I-MS

The unit is a tower-only design, about 160 x 220 x 410 mm and 13.6kg, so it fits beside a desk or in a small cabinet. It needs no rack. A 2-year warranty covers the unit.

Who Should Choose the SMV1000I-MS

The SMV1000I-MS suits small businesses, home offices, and light commercial sites that want dependable protection and outlet flexibility. It is especially useful for organizations with mixed equipment types that want to avoid plug-compatibility headaches.

Final Thoughts on the SMV1000I-MS

Even a small IT setup benefits from protection that is dependable and adaptable. The APC Easy UPS SMV1000I-MS combines universal outlets, AVR-assisted line-interactive protection, a pure sine wave output, and right-sized 1000VA capacity. For anyone seeking reliable, flexible UPS protection for a smaller environment, it is a smart, dependable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Easy UPS SMV1500AI-MS for Ultimate Protection

Small businesses and light IT setups need power protection that is dependable without being complicated, and flexible enough to fit the equipment they already own. The APC Easy UPS SMV1500AI-MS provides 1500VA/1050W of line-interactive protection at 230V with universal outlets that accept different plug types. It is a pure sine wave tower that adapts to your setup.

Introducing the SMV1500AI-MS

The SMV1500AI-MS is part of APC’s Easy UPS SMV series, which gives power protection for unstable power conditions in a rugged metal tower. At 1500VA, it suits small server setups, network equipment, and a handful of essential office devices. It is generator compatible, and its input accepts a wide voltage range.

Universal Outlet Advantage of the SMV1500AI-MS

The unit has four universal battery-backup outlets that accept a variety of plug types without separate adapters. That helps with mixed equipment brands and with sites that use different plug standards. Setup is simpler, and compatibility worries drop away. The input uses an IEC C14 connection.

Line-Interactive Protection with AVR in the SMV1500AI-MS

The SMV1500AI-MS uses line-interactive technology with automatic voltage regulation (AVR) to correct voltage sags and surges without switching to battery. Its input accepts roughly 160V to 295V, so it stays off battery through serious swings. When a real outage hits, transfer to battery takes about 2 ms typically. The pure sine wave output suits sensitive electronics.

Battery Backup Runtime with the SMV1500AI-MS

Two 12V/10Ah sealed lead-acid batteries provide about 4 minutes at full load and about 13 minutes at half load. That is enough time to save work and shut down safely, which matters in small offices with no IT staff on hand. The batteries recharge in about 4 hours and typically last 3 to 5 years.

Power Rating and Power Factor of the SMV1500AI-MS

At 1500VA with a 0.7 power factor, the unit delivers 1050W of real power. That covers a small server, a switch, and a few peripherals. When you plan what to connect, keep the total load under both the VA and watt figures.

Display and Alerts on the SMV1500AI-MS

An LCD shows AC, AVR, and battery modes, battery and load levels, input and output voltage, and error conditions at a glance. A USB port connects the UPS to a computer for monitoring and shutdown. Audible alarms warn of battery operation, low battery, and overload.

Simple, Adaptable Deployment: The SMV1500AI-MS

The unit is a tower-only design, about 160 x 220 x 410 mm and 17.8kg, and it operates from 0 to 40°C. It needs no rack and no complex setup. A 2-year warranty covers the unit.

Who Should Choose the SMV1500AI-MS

The SMV1500AI-MS suits small businesses, light commercial sites, and IT setups with mixed equipment that want dependable protection and outlet flexibility. It is especially useful for organizations that want straightforward power protection without worrying about plug compatibility.

Final Thoughts on the SMV1500AI-MS

Dependable protection is more valuable when it fits different equipment and setups. The APC Easy UPS SMV1500AI-MS combines universal outlets, AVR-assisted line-interactive protection, a pure sine wave output, and practical 1500VA capacity. For anyone who wants reliable, flexible protection for a smaller IT environment, it is a smart, dependable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SMV2000AI-MS Ultimate Power Protection Now

Businesses with mixed equipment, or sites in different regions, often struggle to find a UPS that works with every plug type. The APC Easy UPS SMV2000AI-MS answers that with 2000VA/1400W of line-interactive protection at 230V and six universal outlets. It protects several devices without a drawer full of adapters.

Introducing the SMV2000AI-MS

The SMV2000AI-MS is part of APC’s Easy UPS SMV line, designed to deliver battery backup and surge protection for electronics and computers. As a 2000VA tower, it suits small server rooms, network closets, and offices that need reliable protection for several connected devices. The unit uses a pure sine wave output, which is gentle on sensitive electronics.

Universal Outlet Flexibility in the SMV2000AI-MS

Six universal receptacles accept a range of plug types without separate adapters. That is useful for businesses with equipment from different manufacturers or organizations operating in regions with varying plug standards. Setup is simpler, and day-to-day equipment management gets easier.

Line-Interactive Protection in the SMV2000AI-MS

The SMV2000AI-MS uses line-interactive technology with automatic voltage regulation (AVR) to correct minor voltage sags and surges without draining the battery. That helps extend battery life while still protecting quickly when a real outage hits. Its input accepts a nominal 230V at 45 to 65Hz with auto-sensing, so connected equipment is kept clear of unstable electricity.

Battery Runtime and Safe Shutdown on the SMV2000AI-MS

When power is lost, the SMV2000AI-MS provides about 3 minutes 21 seconds at full load and about 11 minutes at half load. That is enough time to save data and shut systems down in a controlled manner, which helps avoid the data loss and equipment stress that follow sudden power cuts. Check your actual load against the 1400W rating when planning runtime.

Power Rating and Capacity of the SMV2000AI-MS

At 2000VA with a 0.7 power factor, the unit delivers 1400W of real power. That covers a handful of servers, switches, or workstations. When you plan what to connect, keep the total load under both the VA and watt figures.

Simplifying Multi-Region and Mixed-Equipment Deployments: The SMV2000AI-MS

For organizations that manage offices or server rooms across regions, universal outlets reduce the work of sourcing region-specific protection. You can standardize on one UPS model across locations and equipment types, which cuts spares and training.

Installation Notes for the SMV2000AI-MS

The SMV2000AI-MS is a tower-only unit measuring about 18 x 24 x 45.5 cm and weighing about 23.5kg. It uses an IEC C14 input. A 2-year warranty covers the unit.

Who Should Choose the SMV2000AI-MS

The SMV2000AI-MS suits small and mid-sized businesses, multi-site operations, and IT environments with mixed equipment that value both dependable protection and outlet flexibility. It is especially useful for organizations looking to simplify their power protection strategy across diverse hardware.

Final Thoughts on the SMV2000AI-MS

Reliable protection is more valuable when it adapts to different equipment and regional needs. The APC Easy UPS SMV2000AI-MS delivers with universal outlets, AVR-assisted line-interactive protection, and 2000VA/1400W of capacity. For businesses that want dependable, flexible UPS protection, it is a smart, worthwhile choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Easy UPS SMV 3000VA: Ultimate Protection

Not every business uses the same equipment or the same plugs, so flexibility in a UPS matters as much as capacity. The APC Easy UPS SMV3000AI-MS provides 3000VA/2100W of line-interactive protection at 230V with six universal outlets. They accept a wide range of plug types, so mixed equipment connects without adapters.

Introducing the SMV3000AI-MS

The SMV3000AI-MS is the largest model in APC’s Easy UPS SMV line, built to provide battery backup and surge protection for electronics and computers. As a 3000VA tower, it suits small server rooms, network closets, and office environments with several devices to protect. A pure sine wave output makes it suitable for sensitive electronics.

Universal Outlet Design of the SMV3000AI-MS

Six universal receptacles accept many plug standards. That helps businesses with mixed equipment brands or sites in regions with different plug types, and it removes the need to hunt for adapters. Standardizing on one UPS model across varied locations becomes easier.

Line-Interactive Protection with AVR in the SMV3000AI-MS

The SMV3000AI-MS uses automatic voltage regulation (AVR) to boost low voltage and cut high voltage without switching to battery. Its wide input range, 165V to 290V, keeps it off battery through most voltage swings. That preserves battery life for real outages. Transfer to battery takes 2 to 6 ms typically, with a 12 ms maximum.

Battery Backup Runtime on the SMV3000AI-MS

The 48V sealed lead-acid battery (432VAh) provides about 11 minutes at half load, about 6.5 minutes at 70% load, and about 3 minutes at full load. That is time to save data, shut systems down cleanly, or hand over to a generator. The battery recharges in about 4 hours and has a typical life of 3 to 5 years. Replacement is available as the APCRBCV209, and a cold-start function lets the unit power up on battery when the grid is down.

Display and Management on the SMV3000AI-MS

A graphic LCD shows operating modes, system parameters, and alarms, so you can read status at the unit. A USB port provides local connection, and an intelligent card slot accepts an optional network management card for SNMP-based remote monitoring. Audible alarms warn of battery operation, low battery, and overload. Noise is about 45 dBA, which suits an office.

Capacity and Power Factor of the SMV3000AI-MS

At 3000VA with a 0.7 power factor, the unit delivers 2100W of real power. Make sure your total load stays under 2100W as well as 3000VA when you plan what to connect. That is enough for several servers, switches, or workstations.

Installation Notes for the SMV3000AI-MS

The SMV3000AI-MS is a tower-only unit weighing about 25.2kg and measuring 180 x 240 x 455 mm. It has an IEC C20 input, so confirm your mains lead and supply socket are rated for the load. A 2-year warranty covers the unit.

Who Should Choose the SMV3000AI-MS

The SMV3000AI-MS suits small and mid-sized businesses, multi-site operations, and IT environments with mixed equipment that want outlet flexibility alongside dependable line-interactive protection. It is especially valuable for organizations that want to simplify deployment across varied hardware.

Final Thoughts on the SMV3000AI-MS

Flexibility and reliability can go together. The APC Easy UPS SMV3000AI-MS combines universal outlets, AVR protection, a graphic LCD, and an optional management card slot at 3000VA. For organizations that want adaptable, dependable UPS protection across varied equipment, it is a smart, practical choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS C 1500VA: Ultimate Protection

For rack-mounted equipment, space efficiency and clear status information matter as much as backup power. The APC Smart-UPS C SMC1500I-2U provides 1500VA/900W of line-interactive protection at 230V in a compact 2U rack-mount chassis, with a graphic LCD for status at a glance.

Introducing the SMC1500I-2U

The SMC1500I-2U is an entry-level model in APC’s Smart-UPS C range, designed to provide intelligent, efficient network power protection. It suits servers, point-of-sale systems, routers, switches, hubs, and other network devices. Four IEC C13 outlets plus two IEC jumper cables, all battery-backed, let one unit power several devices. The input is an IEC C14 connection.

Line-Interactive Protection with AVR in the SMC1500I-2U

The unit delivers a pure sine wave output and uses automatic voltage regulation (AVR) to correct sags and surges without switching to battery. It accepts a wide input range of 170V to 300V, so it stays off battery through most voltage swings. A surge energy rating of 459 joules and protection against lightning, brownouts, and sags help shield connected equipment.

Graphic LCD Interface on the SMC1500I-2U

The multifunction graphic LCD gives clear information on power status, load, and battery. You can configure the UPS locally with simple navigation keys. A load energy meter reports usage. Because status is visible on the unit itself, you don’t need separate software for a quick check.

Space-Efficient 2U Rack Design of the SMC1500I-2U

The SMC1500I-2U takes up only 2U of rack space. It measures about 89 x 432 x 457 mm and mounts in a standard 19-inch rack. Rack-mounting brackets are included, along with a USB cable, installation guide, and a CD with software. Noise is about 46 dB, which is quiet for a rack unit.

Battery Runtime and Hot-Swap Convenience on the SMC1500I-2U

The built-in battery (260VAh) gives about 6.8 minutes at full load and about 18.7 minutes at half load. That is enough time to save data, shut systems down cleanly, or hand over to a generator. The battery is hot-swappable and user-replaceable, and a replacement battery cartridge restores original performance. It recharges in about 3 hours, and automatic battery tests help catch a weak battery early. A cold-start function lets it power up on battery when the grid is down.

Green Mode Efficiency of the SMC1500I-2U

Green mode bypasses unused components when power is clean, which delivers high operating efficiency without sacrificing protection. Lower energy waste means lower running costs, and less heat to cool in the rack.

Connectivity of the SMC1500I-2U

USB communication connects the UPS to your computer for monitoring and safe shutdown. Auto-restart brings the load back when utility power returns. Audible alarms and LED indicators warn of battery operation and other events.

Warranty on the SMC1500I-2U

The SMC1500I-2U carries a 2-year warranty, and its battery can be replaced without sending the unit away.

Who Should Choose the SMC1500I-2U

The SMC1500I-2U suits small and mid-sized businesses and IT departments that run rack-based server or network equipment and want reliable protection with a clear built-in display. It is especially valuable where rack space is limited but visibility into power conditions still matters.

Final Thoughts on the SMC1500I-2U

Reliable rack power protection with clear, built-in monitoring makes the APC Smart-UPS C SMC1500I-2U a smart choice for space-conscious IT environments. With a compact 2U design, pure sine wave output, AVR, green mode, and a hot-swappable battery, it gives businesses a practical way to safeguard critical rack equipment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Easy UPS SRV 3000VA: Ultimate Protection

Businesses that depend on clean, steady power need more than basic backup. The APC Easy UPS SRV3KIL is a 3kVA/2400W double-conversion online UPS for 230V that ships with an external battery pack and can scale to longer runtime. It is designed for IT environments that need dependable performance in unstable power conditions.

Introducing the SRV3KIL

The SRV3KIL is part of APC’s Easy UPS On-Line SRV series, a versatile, cost-competitive single-phase online range built to handle wide voltage swings and inconsistent power. As a 3kVA pure sine wave tower, it suits small and mid-sized server rooms, network closets, and business-critical setups. It suits businesses that have outgrown line-interactive units but don’t need enterprise-scale systems.

Online Double-Conversion Technology in the SRV3KIL

The SRV3KIL regulates power continuously through its inverter and does not wait for an outage to switch to battery. The output is a clean sine wave with 0 ms transfer time. An input range starting at 160V keeps the unit off battery through voltage swings. It auto-senses frequency from 40 to 70Hz and is generator compatible.

Efficiency and Power Quality of the SRV3KIL

An ECO mode bypasses unused components in good power conditions and reaches up to 95% efficiency without giving up protection. In normal double-conversion mode, the unit shields connected equipment from sags, surges, and frequency variation. Servers, storage, and networking gear see steady power, which supports longer life and fewer unexpected reboots.

External Battery Pack Included with the SRV3KIL

The SRV3KIL ships as a kit: the UPS plus one external battery pack (SRV72BP-9A) and a battery cable. The pack uses sealed, maintenance-free 12V/9Ah batteries in a 72V string, and it recharges in about 5.5 hours. Keeping the battery outside the UPS chassis means it can sit where it suits the site.

Scalable Runtime with the SRV3KIL

You can add up to four external battery packs to scale runtime from minutes to hours. This suits long-runtime applications, such as sites with lengthy outages or those that want more time for a generator to start. Start with the included pack and add more as your needs become clearer.

Outlets and Connectivity on the SRV3KIL

The SRV3KIL provides six IEC C13 outlets and one IEC C19 outlet, with a C20 input, so one unit can power several servers, switches, and a higher-draw device. An intelligent card slot accepts an optional network management card, and USB and RS-232 ports are included. A multifunction LCD shows status and settings, and management software is provided.

Reliability Features of the SRV3KIL

An automatic internal bypass keeps the load powered if the UPS overloads or faults. Loads restart automatically after a shutdown when utility power returns. A resettable circuit breaker makes overload recovery easy, and intelligent battery management maximizes battery life. Audible alarms warn of battery operation, low battery, and overload.

Installation Notes for the SRV3KIL

The UPS and its battery pack together weigh about 38kg, so plan for safe lifting and placement. The tower measures about 336 x 190 x 425 mm. A 2-year warranty covers the UPS and its battery.

Who Should Choose the SRV3KIL

The SRV3KIL suits small and mid-sized businesses and IT departments that need dependable, high-quality power for several servers or networking devices. It is especially valuable for organizations that have outgrown line-interactive UPS units and want true online protection with room to extend runtime.

Final Thoughts on the SRV3KIL

For businesses that treat power protection as part of their infrastructure strategy, the APC Easy UPS SRV3KIL is a dependable, high-quality choice. True double-conversion technology, up to 95% ECO-mode efficiency, an included battery pack, and expandable runtime make it a smart investment for growing IT environments.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRV2KIL: Ultimate Backup Power Protection

Not every business needs a large UPS, but many still need the power quality that only online protection gives. The APC Easy UPS On-Line SRV2KIL is a 2000VA double-conversion UPS for 230V that comes with an external battery pack for extended runtime. It is a compact tower with pure sine wave output.

Introducing the SRV2KIL

The SRV2KIL is part of APC’s Easy UPS On-Line SRV series, designed for essential power protection in unstable power conditions. APC built the range for IT professionals and network administrators who need business uptime and continuity. The 2000VA tower suits small server setups, network closets, and compact critical deployments. IEC C13 outlets, an intelligent card slot, and an LCD complete the package.

Online Double-Conversion Technology in the SRV2KIL

The SRV2KIL regulates power continuously through its inverter and does not wait for an outage to switch to battery. The output is clean sine wave power with zero transfer time. That is a higher level of protection than line-interactive units give, and it matters even at this capacity. The wide input range lets the unit ride through voltage swings without using the battery.

External Battery Pack Included with the SRV2KIL

The SRV2KIL ships with an external lead-acid battery pack and a battery cable. The pack is a 72V VRLA unit of about 18kg, and it recharges in about 4 to 5.5 hours depending on the listing. Keeping the battery outside the UPS chassis lets you place it where it suits the site, and it opens the door to extended runtime.

Flexible Runtime Scaling with the SRV2KIL

Extended-runtime models let you add external battery packs to scale backup time from minutes to hours. That suits sites with longer outages, or those that want more time for a generator to start. You are not locked into a fixed runtime, so you can add capacity as your needs grow.

Built-In Bypass and Battery Care on the SRV2KIL

An automatic internal bypass uses a static switch so the load keeps power even during an internal fault or overload, up to 125% of rated load. Intelligent battery management uses precise charging to extend battery performance and life. Automatic battery tests provide advance notice of problems.

Management and Connectivity of the SRV2KIL

An intelligent card slot accepts a network management card, and the UPS can connect to EcoStruxure IT or third-party management platforms. A multifunction LCD shows status and settings locally. USB and RS-232 connections are included, and audible alarms warn of battery operation, low battery, and overload.

Compact Capacity, Serious Protection: The SRV2KIL Advantage

Online protection used to mean big, costly units. The SRV2KIL brings it to a compact tower at 2000VA. You get double-conversion power quality without the cost or footprint of a much larger system.

Warranty on the SRV2KIL

The UPS and its built-in lead-acid battery carry a 2-year warranty, with extended service options available.

Who Should Choose the SRV2KIL

The SRV2KIL suits small businesses, remote offices, and IT teams that manage compact but critical equipment. It is especially valuable where clean online power matters, and where the option to add battery packs later gives a clear path to longer runtime.

Final Thoughts on the SRV2KIL

Even small IT environments deserve serious power protection. The APC Easy UPS On-Line SRV2KIL combines true double-conversion technology, an included external battery pack, and room to extend runtime. For organizations that value power quality as much as capacity, it is a smart, practical choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRV6KIL: Ultimate Backup Power Protection

Some sites need more than a short buffer when the power goes out. They need clean power and the option to extend backup time as their needs change. The APC Easy UPS On-Line SRV6KIL is a 6kVA/6kW double-conversion online UPS for 230V that comes with an external battery pack. You can scale runtime from minutes to hours by adding more packs.

Introducing the SRV6KIL

The SRV6KIL is a pure sine wave, tower-format online UPS in APC’s Easy UPS On-Line SRV series. It is designed to handle a wide voltage range and inconsistent power conditions, and it suits servers, networking infrastructure, and other essential equipment in small and mid-sized IT environments. It has a hard-wired 3-wire (1P+N+E) connection, an intelligent card slot, and an LCD. The supplied battery pack, cable, USB cable, RS-232 cable, and manual are included.

Online Double-Conversion Technology in the SRV6KIL

The SRV6KIL regulates power continuously through its inverter and does not wait for an outage to switch to battery. The output is clean and stable with zero transfer time. A wide input range, 176V to 300V at full load and 110V to 300V at half load, keeps the UPS off battery through serious voltage swings. It auto-senses input frequency from 40 to 70Hz, so it works with generators too.

External Battery Pack Included with the SRV6KIL

Unlike units that ship with internal batteries, the SRV6KIL comes with a 240V external battery pack (SRV240BP-9A). It is a lead-acid pack of about 1512VAh, and it recharges in about 5 hours. A battery connector joins the pack to the UPS. Because the battery sits outside the UPS chassis, it can be placed where it suits the site.

Scalable Runtime with the SRV6KIL

You can add up to four SRV240BP-9A external battery packs to extend runtime from minutes to hours. That fits long-runtime applications, such as sites with frequent or lengthy outages, or those that want a longer cushion while a generator starts. Start with one pack and add more as your needs become clearer.

Reliability and Protection Features of the SRV6KIL

Intelligent, temperature-compensated battery management maximizes battery performance and life. An automatic internal bypass supplies utility power to the load in the event of an overload or fault. A battery disconnector adds safety during service. Audible alarms warn of battery operation, low battery, and overload, and an Emergency Power Off (EPO) input supports safety systems.

Connectivity and Control of the SRV6KIL

A multifunction LCD shows UPS status and settings. USB and RS-232 ports provide local connections, and the intelligent card slot accepts a network management card for remote monitoring and control. IT teams can watch power conditions and respond to alerts without visiting the rack.

Installation Notes for the SRV6KIL

The UPS and battery pack are heavy; the battery pack alone weighs about 79kg. Plan for suitable lifting equipment and floor loading. The unit needs a hard-wired single-phase connection, which a qualified electrician should install.

Warranty on the SRV6KIL

The UPS and its battery carry a 2-year warranty, with extended service options available.

Who Should Choose the SRV6KIL

The SRV6KIL suits small and mid-sized businesses, IT departments, and sites that need clean online power and runtime they can grow. It is especially valuable where outages tend to run long, and where the ability to add battery packs later brings peace of mind.

Final Thoughts on the SRV6KIL

Reliable power protection doesn’t have to mean choosing between quality and flexibility. The APC Easy UPS On-Line SRV6KIL combines true double-conversion power with an included external battery pack and room to add more. For organizations that want dependable, scalable protection at 6kVA, it is a smart, practical investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRV10KIL: Ultimate Backup Power Protection

Some sites can’t live with a short backup window when the power fails. The APC Easy UPS On-Line SRV10KIL is a 10kVA/10kW double-conversion online UPS for 230V that is built for long-runtime applications. You can add up to four external battery packs to take runtime from minutes to hours.

Introducing the SRV10KIL

The SRV10KIL is a pure sine wave, tower-format online UPS in APC’s Easy UPS On-Line SRV series. It is designed for essential power protection in even the most unstable power conditions, and it suits servers, networking equipment, and other critical infrastructure. It has an intelligent card slot, a multifunction LCD, and a hard-wired 3-wire (1P+N+E) connection for permanent installation.

Online Double-Conversion Technology in the SRV10KIL

The SRV10KIL regulates power continuously through its inverter and does not wait for an outage to switch to battery. The output is clean and stable with zero transfer time. It can handle an input voltage range of 176V to 300V at full load, or 110V to 300V at half load, which keeps the UPS off battery during severe voltage swings. A frequency range of 40 to 70Hz suits generator supplies as well.

Extended Runtime with External Battery Packs for the SRV10KIL

The SRV10KIL backs up a full 10kW load for about 2.5 minutes on its own batteries. For longer outages, you can add up to four external battery packs (SRV240BP-9A) to scale runtime from minutes to hours. That is valuable where outages tend to run long, or where you want extra time to be sure a generator has fully taken over.

Why Runtime Flexibility Matters: The SRV10KIL Approach

Different sites have different outage risks. With the SRV10KIL, you size backup time to your actual requirement instead of accepting a fixed internal battery. You can start with the UPS alone and add packs as your needs become clearer.

High Efficiency and Power Factor of the SRV10KIL

Double-conversion efficiency is about 94% at full load. An ECO mode bypasses unused electrical components in good power conditions to raise efficiency further without giving up protection. Input power factor correction reduces installation cost because smaller generators and cabling can be used. Output power factor is 1, so all 10kVA is usable as 10kW.

Reliability Features of the SRV10KIL

An automatic internal bypass supplies utility power to the load if the UPS overloads or faults, and a manual bypass supports maintenance. Intelligent, temperature-compensated battery management maximizes battery life and reliability. A battery disconnector adds safety, and the unit restarts loads automatically after a shutdown when utility power returns.

Connectivity and Control of the SRV10KIL

DB-9 RS-232, USB, and an intelligent card slot provide connectivity. The card slot accepts a network management card for remote monitoring and control. The multifunction LCD shows status and settings, and an Emergency Power Off (EPO) input supports safety systems. Audible alarms warn of battery operation, low battery, and overload.

Installation Notes for the SRV10KIL

The SRV10KIL is a tower-only unit that weighs about 76.5kg, so plan for suitable lifting equipment and floor loading. It needs a hard-wired single-phase connection, which a qualified electrician should install. Dimensions are about 36.8 x 38 x 48.5 cm.

Warranty on the SRV10KIL

The UPS and its built-in lead-acid battery carry a 2-year warranty, and extended service options are available.

Who Should Choose the SRV10KIL

The SRV10KIL suits data rooms, healthcare and light industrial sites, and businesses running mission-critical infrastructure that needs clean online power and extendable runtime. It is especially valuable in regions with long or frequent outages, where internal batteries alone wouldn’t give enough coverage.

Final Thoughts on the SRV10KIL

When power protection has to go beyond a short buffer, the APC Easy UPS On-Line SRV10KIL combines true double-conversion power with extendable runtime, high efficiency, and solid reliability features. For organizations that need serious, scalable power protection at 10kVA, it is a smart, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.