Powerful APC RBC55: Ultimate Backup Power Protection

A UPS is a long-term investment in uptime, but its battery wears out sooner than the unit does. When runtime starts to fade, the APC Replacement Battery Cartridge RBC55 offers a factory-matched way to restore full backup capacity to compatible APC Smart-UPS units. You don’t have to buy a new UPS.

Introducing the RBC55

The RBC55 is a genuine APC replacement battery cartridge (#55). It is tested and certified by APC to restore UPS performance to its original specifications. It contains two battery modules, and it ships fully assembled with all required connectors, an installation guide, and a recycling guide. Instead of retiring a UPS that still works, you fit a fresh pack and carry on.

Compatibility of the RBC55

The RBC55 fits select APC Smart-UPS models. Listings show it for the SUA2200I, SUA3000I, SUA2200XLI, SUA3000XLI, SUA5000RMI5U, SMT2200I, SMT3000I, and SMT2200IC/SMT3000IC, and it is also used in the SUA48XLBP battery pack. Confirm your exact model in APC’s compatibility list before ordering, because RBC numbers are not interchangeable.

Why Timely Battery Replacement Matters

Batteries degrade gradually, often with no obvious warning until an outage exposes the problem. A weak battery can pass a self-test and still fail to deliver the expected runtime in a real event. That leaves critical equipment exposed at the worst moment. The RBC55 restores the capacity lost to years of charge cycles and normal aging.

Battery Specifications of the RBC55

The RBC55 is a sealed, maintenance-free, spill-proof VRLA (lead-acid) battery with 12V DC output and 816 VAh of capacity. Expected life is 3 to 5 years, and recharge takes about 3 hours. It weighs about 24kg, so use proper lifting technique and consider a second person when you install it.

Hot-Swappable Installation of the RBC55

The RBC55 is hot-swappable in compatible UPS units, so you can replace it without powering down protected equipment. That keeps downtime to a minimum and shortens the window of vulnerability that comes with a tired battery. Follow the installation guide and your UPS manual for the correct procedure.

Genuine APC Quality: The RBC55 Advantage

APC selects its battery suppliers carefully, monitors battery health in storage, and matches each battery to the UPS it supports. That keeps fit, voltage, and runtime within specification. Off-brand substitutes can bring poor fit, lower capacity, and shorter life. The RBC55 carries a 1-year limited warranty, so you have recourse if something goes wrong.

A Smarter Alternative to Full UPS Replacement

Replacing the battery costs far less than buying a new UPS. The core electronics of a UPS often outlast the battery, so a new cartridge extends the life of the system, protects your original investment, and restores like-new backup performance.

Recognizing When You Need the RBC55

Warning signs include reduced runtime during outages, recurring low-battery alerts, failed self-tests, and audible warning tones. If a compatible UPS shows any of these, the RBC55 gives you a direct path back to confident protection. Many teams replace the battery on a 3-to-5-year schedule instead of waiting for a failure.

Who Should Consider the RBC55

The RBC55 suits businesses, IT teams, and individual users who already own a compatible Smart-UPS and want to keep its performance up over time. It is especially valuable for those who depend on steady backup power and can’t risk reduced runtime from an aging battery.

Final Thoughts on the RBC55

Backup power is only as strong as the battery behind it. The APC Replacement Battery Cartridge RBC55 offers an affordable, dependable way to keep that protection intact, with genuine APC engineering, hot-swap installation, and a 1-year warranty. For anyone noticing battery wear in a compatible Smart-UPS, the RBC55 is a smart, cost-effective solution.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC APCRBC152 Battery: Ultimate Backup Power

Every UPS is only as reliable as the battery inside it. Over time, even the best battery pack loses its ability to hold a charge. The APC Replacement Battery Cartridge APCRBC152 restores full backup performance to compatible APC Smart-UPS units, so critical equipment stays protected without the cost of replacing the whole system.

Introducing the APCRBC152

The APCRBC152 is a genuine APC replacement battery cartridge (RBC #152). It matches the voltage, capacity, and physical form of the original battery it replaces. When battery performance declines, you swap in a fresh, factory-matched pack and keep using the UPS you already own. The cartridge arrives fully assembled, with an installation guide.

Compatibility of the APCRBC152

The APCRBC152 is tested and certified for specific APC UPS models. Distributor listings show it for Smart-UPS SRT units such as the SRT1500XLI, SRT3000XLI, and SRT3000RMXLI, and related variants. Check APC’s compatibility list for your exact model before ordering, because RBC numbers are not interchangeable between UPS models.

Why Battery Replacement Matters for UPS Reliability

A UPS is only useful in an outage if its battery can deliver the runtime it was designed for. As batteries age, capacity falls and runtime shrinks. In the worst case, the UPS fails when you need it most. The APCRBC152 restores the original runtime, so servers, networking equipment, and workstations stay protected as intended.

Battery Specifications of the APCRBC152

The APCRBC152 uses sealed lead-acid (VRLA) technology, rated at 12V and about 480VAh. It is maintenance-free and leak-proof, with a typical life of 3 to 5 years. It weighs about 15.3kg, so plan for safe handling during installation.

Genuine APC Engineering Behind the APCRBC152

A genuine cartridge keeps the UPS’s safety and performance within APC’s specifications. Off-brand substitutes can bring poor fit, lower capacity, or shorter life. The APCRBC152 is built to the same standards as the battery that shipped with the UPS, and it carries a 2-year limited warranty, so you are covered if something goes wrong.

Hot-Swappable, Straightforward Replacement with the APCRBC152

The APCRBC152 is hot-swappable in compatible UPS units, so you can replace it without powering down protected equipment. That keeps downtime to a minimum and shortens any gap in your power backup coverage. Always follow the installation guide and your UPS manual for your model.

Cost-Effective Alternative to Full UPS Replacement

A new battery costs far less than a new UPS. The core electronics of a UPS often outlast the battery, so replacing the cartridge extends the life of your system and protects your original investment. You get like-new runtime back without an unnecessary capital expense.

Signs You May Need the APCRBC152

Watch for shorter runtime than expected, frequent low-battery alerts, failed self-tests, or an audible warning that the battery needs replacing. If a compatible UPS shows any of these signs, the APCRBC152 gives you a direct path back to dependable performance. Many teams replace on a schedule of every 3 to 5 years instead of waiting for a failure.

Who Should Consider the APCRBC152

The APCRBC152 suits businesses, IT departments, and users who already run a compatible Smart-UPS SRT and want to maintain its performance. It is especially valuable for organizations that depend on steady uptime and can’t risk reduced runtime from an aging battery.

Final Thoughts on the APCRBC152

A UPS is only as dependable as its battery. The APC Replacement Battery Cartridge APCRBC152 offers a straightforward, cost-effective way to restore full protection with a genuine, factory-matched cartridge. For anyone seeing signs of battery wear in a compatible APC Smart-UPS, it is a smart, reliable solution.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS 1500VA: Ultimate Power Protection

Businesses that depend on constant uptime need more than basic battery backup. They need protection that is smart, informative, and built to a trusted standard. The APC Smart-UPS SMT1500I provides 1500VA/1000W of line-interactive protection at 230V in a tower with eight IEC C13 outlets, a SmartSlot, automatic voltage regulation, and an LCD.

Introducing the SMT1500I

The SMT1500I is made for IT professionals and network administrators who need to maintain uptime and continuity. It protects servers, point-of-sale systems, routers, switches, and other network devices from outages and voltage instability. Its eight IEC C13 outlets, plus two IEC jumper cables, let several devices share one protected source in a small server room, network closet, or office.

Pure Sine Wave and AVR Protection in the SMT1500I

The SMT1500I produces a pure sine wave output on battery, which gives the highest compatibility with active power-factor-corrected servers and other sensitive electronics. Automatic voltage regulation (AVR) corrects sags and surges without drawing on the battery, so the battery is kept for real outages. The unit also protects against lightning strikes, brownouts, and surges.

LCD Interface on the SMT1500I

The multifunction LCD gives clear, accurate information in several languages and lets you configure the UPS locally with simple navigation keys. A predictive replace-battery date helps with maintenance planning, and an energy meter reports actual kilowatt-hours used. You can read the UPS’s condition at a glance.

Green Mode Efficiency on the SMT1500I

Green mode bypasses unused electrical components when power is good, delivering high efficiency without giving up protection. Lower energy waste means lower running costs and less heat to remove.

SmartSlot Expandability of the SMT1500I

A SmartSlot accepts an optional Network Management Card. With it, PowerChute Network Shutdown can gracefully shut down physical servers, virtual machines, and HCI clusters, and the UPS can connect to EcoStruxure IT or third-party management platforms. That lets you add remote monitoring later, without replacing the unit. USB and RS-232 ports provide local connections.

Battery Runtime and Serviceability of the SMT1500I

Typical backup is about 6.5 minutes at full load and about 23 minutes at half load. That is time to save data, shut down cleanly, or hand over to a generator. The battery recharges in about 3 hours and is user-replaceable with the RBC7 cartridge. Automatic battery tests and a cold-start function add reliability.

Switched Outlet Group on the SMT1500I

A switched outlet group can be controlled separately from the rest of the UPS. You can reboot a hung device remotely, sequence startups, or shed non-critical load to stretch runtime for what matters most.

Warranty Backing for the SMT1500I

Listings show a 3-year warranty on the SMT1500I, with a 2-year warranty on the built-in lead-acid battery. That backing supports long-term planning.

Who Should Choose the SMT1500I

The SMT1500I suits small and mid-sized businesses, IT departments, and network environments that need dependable, feature-rich protection. It is especially valuable for teams that want pure sine wave output, a clear LCD, and the option to add network management later.

Final Thoughts on the SMT1500I

Business-critical equipment deserves protection that is both intelligent and dependable. The APC Smart-UPS SMT1500I combines pure sine wave output, AVR, an informative LCD, eight outlets, and SmartSlot expandability. For organizations investing in trusted, future-ready UPS protection, it is a compelling option.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC SRTG20KXLI: Ultimate Power Protection

High-density data centers, medical labs, and other mission-critical sites need protection built for serious loads and for flexible three-phase or single-phase supply. The APC Smart-UPS On-Line SRTG20KXLI provides 20kVA/20kW of true double-conversion online protection in a rack/tower convertible design, and it supports both 230V and 380V to 415V configurations.

Introducing the SRTG20KXLI

The SRTG20KXLI is part of APC’s Smart-UPS On-Line series. It provides high-density, true double-conversion protection for servers, voice and data networks, medical labs, and light industrial applications. It uses a 7U rack/tower convertible chassis and weighs about 142.5kg, so it suits environments that need a lot of protection capacity and installation flexibility together.

Flexible Voltage and Input Options on the SRTG20KXLI

The SRTG20KXLI accepts a main input of 380V to 415V three-phase or 230V single-phase, with an input tolerance of 160V to 285V. That gives facility teams flexibility when integrating into different electrical infrastructure. Outputs include a hardwired 5-wire (3P+N+E) connection, a hardwired 3-wire (1P+N+E) connection, and an IEC connector, so one unit can serve both three-phase and single-phase distribution.

True Double-Conversion Technology in the SRTG20KXLI

The SRTG20KXLI conditions power continuously, and it does not wait for an outage to switch to battery. The output is a clean sine wave with less than 5% harmonic distortion, synchronized to mains at 50 or 60Hz. Servers, medical devices, and industrial systems stay isolated from sags, surges, and frequency instability at all times.

Overload Handling and Bypass on the SRTG20KXLI

The unit handles overload gracefully, supporting 125% load for 60 seconds and 150% load for 30 seconds before protective action. A built-in static bypass adds operational continuity, passing utility power to the load if the UPS has to transfer during a fault.

Runtime and Scalability of the SRTG20KXLI

At full load, the SRTG20KXLI provides about 3.5 minutes of runtime, and about 9.5 minutes at half load. That is a window for a controlled shutdown or a generator handover. Compatible external battery packs, such as the SRTG192XLBP2, extend runtime for facilities that need longer backup.

Network Management and Remote Monitoring with the SRTG20KXLI

The unit includes an embedded Network Management Card for network-based monitoring and management. It ships with PowerChute Network Shutdown software, which supports graceful shutdown of physical servers, virtual machines, and HCI clusters during extended outages. It also connects to EcoStruxure IT and compatible third-party management platforms for fuller remote visibility.

Compatibility and Serviceability of the SRTG20KXLI

The SRTG20KXLI works with service bypass panels such as the SBP16KP and SBP20KP, additional Network Management Cards including the AP9613 and AP9641, and rail kits such as the SRTGRK1 and SRTGRK2 for rack integration. Listings show a 3-year warranty on the unit and a 2-year warranty on the built-in lead-acid battery.

Who Should Choose the SRTG20KXLI

The SRTG20KXLI suits data centers, medical laboratories, light industrial sites, and other environments with dense, business-critical loads that need flexible three-phase or single-phase double-conversion protection. It is especially valuable for organizations that need scalable runtime and strong remote management at 20kVA.

Final Thoughts on the SRTG20KXLI

For facilities that can’t compromise on power quality or uptime, the APC Smart-UPS On-Line SRTG20KXLI delivers a flexible, high-density solution built on proven double-conversion technology. Scalable runtime, comprehensive remote monitoring, and support for single-phase and three-phase configurations make it a strong choice for mission-critical environments. For organizations investing in serious 20kVA power protection, it is a smart, capable choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful APC Smart-UPS 1500VA: Ultimate Power Protection

Small businesses and growing offices often need more than entry-level capacity, plus built-in monitoring that keeps IT staff informed. The APC Smart-UPS C SMC1500I provides 1500VA/900W of line-interactive protection at 230V, with ten battery-backed connections and a graphic LCD. It gives you smart protection for everyday power management.

Introducing the SMC1500I

The SMC1500I is a tower in APC’s Smart-UPS C series, an entry-level family designed to provide intelligent, efficient network power protection. It suits servers, point-of-sale systems, routers, switches, hubs, and other network devices. At 1500VA, it has solid headroom for a small server, several networking devices, or essential office equipment at the same time.

Pure Sine Wave and AVR Protection in the SMC1500I

The SMC1500I delivers a pure sine wave output and uses automatic voltage regulation (AVR) to correct sags and surges without switching to battery. That preserves battery life for real outages and keeps connected equipment clear of unstable power. Its input window is wide, so it stays on mains through most voltage swings.

Ten Battery-Backed Connections on the SMC1500I

The unit provides eight IEC C13 outlets plus two IEC jumper cables, ten battery-and-surge connections in total. That gives you room to protect a server, switch, monitor, and other devices from one unit, instead of leaving some on unprotected strips.

Graphic LCD and Status Monitoring on the SMC1500I

The graphic LCD shows clear, real-time information on power status, battery condition, and load. You can configure settings at the unit and run battery and runtime tests. You can see the UPS’s condition at a glance, with no extra software needed for day-to-day checks. Audible alarms warn of battery operation, low battery, and overload.

Battery Backup Runtime with the SMC1500I

During an outage, the SMC1500I gives users time to save data and shut systems down safely, or to hand over to alternate power. Typical backup is about 8 minutes at full load and about 28 minutes at half load. The battery recharges in about 3 hours. It is hot-swappable and user-replaceable with the RBC6 cartridge, so servicing doesn’t require powering down protected equipment. Automatic battery tests and a cold-start function add reliability. This is a standard-runtime model with no external battery option.

USB and Serial Connectivity of the SMC1500I

USB and serial ports connect the UPS to your computer for monitoring and automatic, graceful shutdown. The unit ships with a software CD, a documentation CD, and a USB cable. Note that the SMC1500I has no SNMP network card option, so it suits local monitoring better than remote management across many sites.

Compact Tower Design of the SMC1500I

The tower measures about 219 x 171 x 439 mm, so it fits beside a desk or in a network closet. It operates from 0 to 40°C, and it carries CE, C-Tick, GOST, and VDE approvals. A 2-year warranty covers the unit.

Who Should Choose the SMC1500I

The SMC1500I suits small to mid-sized businesses and IT departments running server or networking equipment that need dependable line-interactive protection with clear built-in monitoring. It is especially valuable for organizations that want straightforward visibility into their power protection without paying for a premium online UPS.

Final Thoughts on the SMC1500I

Reliable protection with accessible monitoring makes the APC Smart-UPS C SMC1500I a solid choice for small businesses and growing IT environments. Pure sine wave output, AVR, ten battery-backed connections, a graphic LCD, and a hot-swappable battery give businesses a practical way to safeguard essential equipment while staying informed. For anyone who wants dependable, smart UPS protection at 1500VA, it is a trustworthy, capable investment.

CONTACT US @ TIACO TECHNOLOGIES.