Powerful Vertiv EDGE 3kVA UPS: Ultimate Protection

Growing offices and edge IT sites need serious backup power that doesn’t demand serious space or budget. The Vertiv EDGE UPS EDGE-3000IRT2UXL provides 3000VA/2700W of line-interactive protection at 230V in a compact 2U rack/tower design. It protects servers, switches, and networking equipment from outages, brownouts, and spikes.

Introducing the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL is the highest-capacity 2U model in Vertiv’s EDGE family. EDGE UPS units are reliable, efficient, manageable line-interactive sine-wave systems built for distributed and edge IT applications. The family spans 500VA to 3000VA across mini-tower, 1U rack, and rack/tower formats. The 3kVA model is the one for larger loads in a network closet or small edge data center.

Line-Interactive Protection with AVR in the EDGE-3000IRT2UXL

The unit uses line-interactive technology with automatic voltage regulation (AVR) and a sine-wave output. AVR corrects voltage sags and swells without drawing on the battery. Battery life is extended, and connected equipment sees steadier power. Efficiency in normal operation is up to 98%, which keeps energy costs down.

High 0.9 Power Factor on the EDGE-3000IRT2UXL

A 0.9 output power factor means 2700W of real power from the 3000VA rating. You can protect larger loads from one unit and spend less on oversizing. That is a real advantage at this price point.

Rack/Tower Convertible Design of the EDGE-3000IRT2UXL

The 2U chassis fits a standard 4-post rack, or it stands as a tower. A 4-post rail rack-mounting kit and a tower stand are included, so installation doesn’t need extra hardware. The unit measures about 438 x 630 x 88mm and weighs about 32kg. A color LCD shows status clearly in either orientation.

Battery Backup and Extended Runtime with the EDGE-3000IRT2UXL

Six 12V/9Ah sealed lead-acid batteries provide up to about 6 minutes of runtime at full load, with longer runtimes at lighter loads. That is time to save data, shut systems down cleanly, or hand over to a generator. When outages run longer, you can add up to 6 extended-run battery cabinets, which are auto-detected for hours of backup time.

Programmable Outlets and Green Mode on the EDGE-3000IRT2UXL

The unit has C13 outlets plus a C19 outlet for higher-draw devices. Three of the outlets are programmable as a group, so you can shut down less-critical loads during an outage to stretch battery runtime for what matters most. A “green mode” can also shut the UPS down automatically in battery mode under very small loads, to protect the batteries and save energy.

Remote Management and Connectivity on the EDGE-3000IRT2UXL

A USB port and a USB cable are included. A free IntelliSlot bay accepts optional SNMP or web cards for remote power management and operating-system shutdown with Vertiv’s free Power Assist software. An emergency power-off (EPO) input adds a safety control.

Warranty and Support for the EDGE-3000IRT2UXL

The unit carries a standard 3-year Vertiv warranty, which reflects confidence in its long-term reliability and gives buyers peace of mind on a critical-infrastructure purchase.

Who Should Choose the EDGE-3000IRT2UXL

The EDGE-3000IRT2UXL suits small and mid-sized businesses, branch offices, and edge IT sites that need mid-to-high-capacity line-interactive protection for several servers or networking devices. It is especially valuable where rack or tower flexibility, expandable runtime, and a high power factor matter, but true online double-conversion isn’t required.

Final Thoughts on the EDGE-3000IRT2UXL

The Vertiv EDGE UPS EDGE-3000IRT2UXL pairs dependable AVR protection with a 0.9 power factor, programmable outlets, and flexible 2U rack/tower deployment. Expandable runtime, IntelliSlot-ready remote management, and a 3-year warranty make it a smart, cost-effective way to protect 3kVA of critical equipment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert PSI PS1500RT3-230: Ultimate Protection

Small businesses and growing server closets need power protection that is dependable and doesn’t take much room or fuss. The Liebert PSI PS1500RT3-230 delivers 1500VA/1350W of line-interactive protection at 230V in a 2U rack/tower design. It shields servers, switches, and workstations from everyday power problems.

Introducing the PS1500RT3-230

The PS1500RT3-230 is part of the Liebert PSI series, a compact line-interactive UPS designed for IT applications such as network closets and small data centers. It can be configured as a self-standing tower or rack-mounted in a 2U space. Tower stands and rack-mount handles are included.

Line-Interactive Protection with Pure Sine Wave in the PS1500RT3-230

The unit regulates voltage and filters noise and transients, and it delivers a pure sine-wave output. Transfer time to battery is 6 ms. The configurable input voltage window means it can ride through voltage swings that would push other units onto battery, which saves battery life for real outages.

Rack/Tower Convertible Design of the PS1500RT3-230

The 2U chassis fits a standard rack or stands as a tower. At about 440 x 412 x 88mm and 20.9kg, it is compact enough for a network closet. Forced cooling keeps it running reliably.

Hot-Swappable Batteries on the PS1500RT3-230

Three 12V/9Ah sealed lead-acid batteries sit in a plug-in module. They are hot-swappable, so replacing them doesn’t mean powering down protected equipment. Runtime is more than 5 minutes at full load at a 0.7 power factor, and more than 3 minutes at a 0.9 power factor. Recharge takes about 5 hours to 90% of capacity. Extended-run battery cabinets are available for longer outages.

Connectivity and Management on the PS1500RT3-230

The unit supports USB, RS-232, and contact-closure communications, and an IntelliSlot port accepts an SNMP web card for network management. An RJ-45 port provides data line protection. An Emergency Power Off (EPO) input, dark start capability, and automatic battery self-test add control and safety. Liebert MultiLink software supports monitoring and controlled shutdown of connected computers.

Alarms and Self-Protection on the PS1500RT3-230

The unit raises alarms for low battery, site wiring faults, and overloads. These warnings help you fix wiring or loading problems early, instead of finding them during an outage. An LED display shows status at a glance.

Who Should Choose the PS1500RT3-230

The PS1500RT3-230 suits small businesses, branch offices, and IT teams that need a mid-capacity line-interactive UPS for a few servers, switches, or workstations. It is especially valuable where rack or tower flexibility, hot-swappable batteries, and SNMP manageability matter more than true online double-conversion. It comes with a 2-year warranty.

Final Thoughts on the PS1500RT3-230

For small-scale IT environments, the Liebert PSI PS1500RT3-230 combines dependable line-interactive protection, pure sine-wave output, hot-swappable batteries, and flexible 2U rack/tower deployment. Built-in data line protection, EPO support, and SNMP-ready management make it a capable choice for protecting 1500VA of essential equipment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert PS2200RT3-230V: Ultimate Protection

Growing network closets and small server rooms need power protection with real capacity and no needless complexity. The Liebert PSI PS2200RT3-230 gives you 2200VA/1980W of line-interactive protection at 230V in a flexible 2U rack/tower design. It protects servers, switches, and networking equipment from everyday power disruptions.

Introducing the PS2200RT3-230

The PS2200RT3-230 is part of the Liebert PSI series, a compact line-interactive UPS designed for IT applications such as network closets and small data centers. It can be configured as a self-standing tower or rack-mounted in a 2U space. It protects servers, critical nodes, network workstations, large network peripherals, routers, and bridges.

Line-Interactive Protection in the PS2200RT3-230

The PS2200RT3-230 corrects voltage sags and surges without switching to battery. It accepts a wide input range of 165V to 300V and delivers a sine-wave output. Connected equipment is shielded from unstable power, and the battery is saved for real outages, which helps it last longer.

Rack/Tower Convertible Design of the PS2200RT3-230

The 2U chassis fits a standard 19-inch rack, or it stands as a tower. Teams can adapt the unit to the site’s layout instead of being locked into a single installation style. Forced cooling keeps it running reliably.

Hot-Swappable Batteries on the PS2200RT3-230

The unit uses six 12V sealed VRLA batteries in a plug-in module design. They are hot-swappable and recharge in about 5 hours, so servicing doesn’t require powering down protected equipment. If an outage hits, there is time to save data, shut systems down cleanly, or hand over to a generator.

Outlets and Connectivity on the PS2200RT3-230

Multiple IEC C13 outlets power servers, switches, and peripherals, with a C20 input connector. A remote ON/OFF function and an LED display give you control and visibility at the unit. Liebert MultiLink software supports monitoring and controlled shutdown of connected computers. The unit also has communication options for network management.

Solid Capacity for Growing IT Needs: The PS2200RT3-230

At 2200VA/1980W, the PS2200RT3-230 has enough headroom to protect several servers, switches, and peripherals from a single unit. That reduces the number of smaller UPS units to manage and simplifies power protection in a rack. It measures about 440 x 657 x 88mm.

Who Should Choose the PS2200RT3-230

The PS2200RT3-230 suits small to mid-sized businesses and IT departments with network closets or small server rooms. It is especially valuable for organizations that need a higher-capacity line-interactive UPS with rack or tower flexibility and hot-swappable batteries.

Final Thoughts on the PS2200RT3-230

For growing IT environments, the Liebert PSI PS2200RT3-230 offers dependable line-interactive protection, a wide input range, hot-swappable batteries, and flexible 2U rack/tower deployment. A generous 2200VA/1980W capacity and MultiLink monitoring make it a capable choice where true online protection isn’t required.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert PSI PS3000RT3-230V: Ultimate Protection

Small server rooms and network closets need power protection with real capacity and no needless complexity. The Emerson Liebert PSI PS3000RT3-230 provides 3000VA/2700W of line-interactive protection at 230V in a flexible 2U rack/tower design. It protects servers, switches, and networking equipment from everyday power disruptions.

Introducing the PS3000RT3-230

The PS3000RT3-230 is part of the Liebert PSI series, a compact line-interactive UPS designed for IT applications such as network closets and small data centers. It can be configured as a self-standing tower or rack-mounted in a 2U space. It protects servers, critical nodes, network workstations, large network peripherals, routers, and bridges.

Line-Interactive Protection with Buck/Boost AVR in the PS3000RT3-230

The PS3000RT3-230 uses line-interactive technology with buck/boost automatic voltage regulation (AVR). It corrects voltage fluctuations without drawing on the battery. It accepts an input range of 165V to 300V and delivers sine-wave output, so equipment sees stable power even when the grid doesn’t provide it. The battery stays charged for real outages, which extends battery life.

Rack/Tower Convertible Design of the PS3000RT3-230

The 2U chassis fits a standard rack, or it stands as a tower using the included stand. A rotatable display follows the orientation you choose. Teams can adapt the unit to the site’s layout instead of committing to a single installation style.

Battery Backup and Hot-Swappable Batteries on the PS3000RT3-230

The unit uses six 12V/9Ah sealed lead-acid battery modules. Typical runtime is about 3 minutes at full load and about 9 minutes at half load. That is enough to save data, shut systems down cleanly, or hand over to a generator. The batteries are hot-swappable and recharge in about 5 hours, so servicing doesn’t require powering down protected equipment.

Flexible Outlet Configuration of the PS3000RT3-230

The PS3000RT3-230 offers multiple IEC outlets, including C13 and C19, with a C20 input. One unit can power a range of servers, switches, and higher-draw devices without extra distribution hardware. The C19 outlet suits heavier equipment.

Connectivity and Manageability on the PS3000RT3-230

RS-232 and USB ports connect to Liebert MultiLink software for monitoring and unattended, controlled shutdown. The unit also supports SNMP manageability, so it can sit within a wider network monitoring setup. IT teams can see power status and respond to events without walking to the rack.

Solid Capacity for Growing IT Needs: The PS3000RT3-230

At 3000VA/2700W, the PS3000RT3-230 has enough headroom to protect several servers, switches, and peripherals from a single unit. That reduces the number of smaller UPS units to manage. At about 37kg, it is a substantial but manageable 2U unit.

Who Should Choose the PS3000RT3-230

The PS3000RT3-230 suits small to mid-sized businesses and IT departments with network closets or small server rooms. It is especially valuable for organizations that need a higher-capacity line-interactive UPS with rack or tower flexibility. It also comes with a 2-year factory warranty.

Final Thoughts on the PS3000RT3-230

For growing IT environments, the Emerson Liebert PSI PS3000RT3-230 offers dependable line-interactive protection, buck/boost AVR, hot-swappable batteries, and flexible 2U rack/tower deployment. SNMP manageability and a generous 3000VA/2700W capacity make it a capable choice for protecting critical equipment where true online protection isn’t required.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert Surge Arrest 38900029001: Ultimate Defense

Power surges from lightning strikes and other utility line problems can permanently damage computers and other sensitive electronics. They can also degrade performance long before anything visibly fails. The Vertiv Liebert 38900029001 is a six-way power extension with surge protection. It puts a line of defense between the mains and the equipment that matters.

Introducing the 38900029001

The 38900029001 is a Liebert six-outlet surge-protected power extension. It follows the Liebert approach of high-quality surge suppression for desktop and network equipment. One unit powers a computer, monitor, printer, and other peripherals from a protected source, so you don’t need a stack of unprotected adapters.

Six Surge-Protected Outlets on the 38900029001

Six surge-protected outlets give plenty of room for a typical workstation or small server closet. All outlets get protection from the same suppression circuitry. That reduces the number of separate power strips you need and keeps cabling tidy.

Thermal Fuse Protection in the 38900029001

A key safety feature is the thermal fuse, which inhibits destructive surges even if the surge suppressor itself has failed. Many cheap power strips keep passing power after their protection is used up, which leaves connected equipment exposed without any warning. A thermal-fuse design is meant to fail safe instead.

Surge Protection Indicator on the 38900029001

A surge protection indicator shows whether protection is still available. You can see at a glance that the suppression circuitry is still working. When it stops, you know it is time to replace the unit, and you don’t find out after the next storm.

On/Off Switch with Circuit Breaker on the 38900029001

The unit has an on/off switch with a built-in circuit breaker. You can cut power to everything connected in one move. The breaker adds protection against overloads, which suits a desk with several devices drawing power at once.

Why Surge Protection Matters: The 38900029001 Advantage

Surges don’t always destroy equipment outright. Repeated smaller spikes can degrade electronic components over time and shorten the life of computers, monitors, and networking gear. A dedicated surge-protected extension is an inexpensive way to guard that investment, and it costs far less than replacing damaged equipment.

Practical Use at the Desk and in the Server Closet: The 38900029001

The 38900029001 fits a home office, a small business desk, a network closet, or anywhere equipment needs more outlets than the wall provides. It extends reach and adds protection in one step, with no configuration.

Who Should Choose the 38900029001

The 38900029001 suits home users, small offices, and IT teams that need more outlets and want surge protection built in. It is especially useful in areas with lightning activity or an unstable grid. It also pairs well with a UPS in a layered protection plan, where the UPS handles outages and the surge-protected extension spreads protected power to more devices.

Final Thoughts on the 38900029001

Surge damage is sudden, expensive, and often avoidable. The Vertiv Liebert 38900029001 gives you six protected outlets, thermal-fuse fail-safe protection, a protection indicator, and a switch with circuit breaker in one simple unit. For anyone who wants dependable, affordable protection for computers and sensitive electronics, the 38900029001 is a smart and sensible choice.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv GXTRT-1500IRT2UXL: Ultimate Protection

Edge sites and small server rooms need power protection that is dependable without taking much room. The Vertiv Liebert GXT RT+ GXTRT-1500IRT2UXL gives you 1.5kVA/1350W of true online double-conversion protection at 230V in a compact 2U rack or tower design. It has six C13 outlets for your equipment.

Introducing the GXTRT-1500IRT2UXL

The GXTRT-1500IRT2UXL is part of Vertiv’s Liebert GXT RT+ series. It is a single-phase UPS that mounts in a rack or stands as a tower, with an easy-to-read LCD and a compact form factor. Online technology with two stages of power conversion delivers strong, affordable protection that suits edge and space-constrained facilities.

Online Double-Conversion Technology in the GXTRT-1500IRT2UXL

The unit uses true online double-conversion architecture. It regulates power continuously through the inverter and does not wait for an outage to switch to battery. Output is clean and continuous, with no interruption when transferring to or from battery. Servers, switches, and edge equipment are shielded from sags, surges, and noise at all times.

High 0.9 Power Factor on the GXTRT-1500IRT2UXL

The high 0.9 power factor means more of the unit’s capacity is usable power for connected equipment. A wide input voltage range keeps it running on mains through voltage swings that would push other units onto battery. You get more usable power for the same footprint.

Input Plug and Output Socket Configuration of the GXTRT-1500IRT2UXL

The input is an IEC60320 C14 plug. Output comes through six IEC60320 C13 sockets, standard connections for servers, switches, and edge networking gear. Integration with existing cabling is straightforward, with no special adapters.

Compact 2U Rack/Tower Design of the GXTRT-1500IRT2UXL

The unit measures 438 x 462 x 88mm and weighs 14.5kg. The 2U form factor fits a standard rack or stands as a tower, so it adapts to the site. That flexibility suits network closets and small server rooms where space is tight.

Battery Backup and Hot-Swap Convenience on the GXTRT-1500IRT2UXL

The GXTRT-1500IRT2UXL uses three 12V/9Ah sealed lead-acid batteries. Typical runtime is about 3.2 minutes at full load and about 9 minutes at half load, enough for a controlled shutdown or a generator handover. The batteries are hot-swappable, so replacing them doesn’t mean powering down protected equipment. External battery cabinets can extend runtime where outages tend to run long.

Efficiency and Energy Savings of the GXTRT-1500IRT2UXL

Efficiency in normal online mode is about 88%. A configurable ECO mode raises efficiency further when conditions allow, lowering energy costs and total cost of ownership. You decide when to trade a little protection for savings.

LCD Interface and Network Monitoring on the GXTRT-1500IRT2UXL

A user-friendly LCD shows full UPS status and configuration information at a glance. A network interface or serial connection allows remote access to monitor power consumption and configure alert notifications. Early warning helps teams act before a small problem becomes downtime, especially at unattended sites.

Who Should Choose the GXTRT-1500IRT2UXL

The GXTRT-1500IRT2UXL suits edge deployments, branch offices, and small server rooms that need genuine online double-conversion protection at a practical capacity. It is especially valuable for organizations that want rack or tower flexibility together with hot-swappable batteries and scalable runtime.

Final Thoughts on the GXTRT-1500IRT2UXL

For edge and space-constrained environments that still demand true online power quality, the Vertiv Liebert GXT RT+ GXTRT-1500IRT2UXL pairs double-conversion reliability with a high power factor and flexible mounting. Hot-swappable batteries, LCD visibility, and network monitoring make it a smart, capable investment for businesses protecting 1.5kVA of critical infrastructure.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv GXTRT-2000IRT2UXL: Ultimate Protection

Edge sites and space-constrained server rooms need power protection that is dependable without taking much room or complexity. The Vertiv Liebert GXT RT+ GXTRT-2000IRT2UXL gives you 2kVA/1800W of true online double-conversion protection at 230V in a 2U rack or tower design. Six C13 outlets are ready for your equipment.

Introducing the GXTRT-2000IRT2UXL

The GXTRT-2000IRT2UXL is the mid-range model in Vertiv’s Liebert GXT RT+ series. It uses online technology with two stages of power conversion for strong, affordable protection. It is a compact, single-phase UPS that mounts in a rack or stands as a tower, and it suits edge and space-constrained facilities.

Online Double-Conversion Technology in the GXTRT-2000IRT2UXL

The unit uses true online double-conversion architecture. It regulates power continuously through the inverter and does not wait for an outage to switch to battery. The output is a continuous, high-quality AC supply with no interruption when transferring to or from battery. Servers, switches, and edge equipment are shielded from every common power disturbance.

High 0.9 Power Factor on the GXTRT-2000IRT2UXL

The high 0.9 power factor means more of the UPS’s rated capacity is usable power for connected devices. A wide input voltage range, 178 to 288V, keeps it on mains power through voltage swings that would push other units onto battery. More usable power per unit means savings in space and cost.

Input Plug and Output Socket Configuration of the GXTRT-2000IRT2UXL

The input is an IEC60320 C14 plug. Output comes through six IEC60320 C13 sockets, standard connections for servers, switches, and edge networking gear. Integration with existing cabling is straightforward, and no special adapters are needed.

Compact 2U Rack/Tower Design of the GXTRT-2000IRT2UXL

The unit measures 438 x 462 x 88mm and weighs 18.2kg. The 2U form factor mounts in a standard rack or stands as a tower. Network closets and small server rooms often have little room, and this design fits.

Battery Backup and Runtime with the GXTRT-2000IRT2UXL

The GXTRT-2000IRT2UXL uses four 12V/9Ah sealed lead-acid batteries. They deliver about 3.2 minutes at full load and about 9 minutes at half load. The batteries are hot-swappable, so replacing them does not mean shutting down protected equipment. For longer outages, up to six external battery cabinets can be added for scalable runtimes of several hours.

ECO Mode and Efficiency of the GXTRT-2000IRT2UXL

Efficiency in normal online mode is about 89%. A configurable ECO mode raises efficiency further when conditions allow, which lowers energy costs and total cost of ownership. You choose when to trade a little protection for savings.

LCD Interface and Network Monitoring on the GXTRT-2000IRT2UXL

A user-friendly LCD shows full UPS status and configuration information. A network interface or serial connection allows remote access to monitor power consumption and configure alert notifications. That visibility helps you act on problems early, which matters most at remote or unattended sites.

Who Should Choose the GXTRT-2000IRT2UXL

The GXTRT-2000IRT2UXL suits edge deployments, branch offices, small server rooms, and other space-constrained facilities that need genuine online double-conversion protection at a mid-range capacity. It is especially valuable for organizations that want rack or tower flexibility together with hot-swappable batteries and scalable runtime.

Final Thoughts on the GXTRT-2000IRT2UXL

For edge and space-constrained environments that still need true online power quality, the Vertiv Liebert GXT RT+ GXTRT-2000IRT2UXL pairs double-conversion reliability with a high power factor and flexible mounting. Hot-swappable batteries, LCD visibility, network monitoring, and expandable runtime make it a smart, capable investment for businesses protecting 2kVA of critical infrastructure.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Liebert GXT4-3000RT230E: Ultimate Protection

Small server rooms, network closets, and edge sites need power protection that never blinks. The Liebert GXT4-3000RT230E provides 3000VA/2700W of true online double-conversion protection at 230V in a compact 2U rack/tower design. It shields critical IT equipment from blackouts, brownouts, sags, surges, and noise.

Introducing the GXT4-3000RT230E

The GXT4-3000RT230E belongs to Vertiv’s Liebert GXT4 series, a compact true online UPS family for protection up to 3kVA. With 3000VA/2700W, it suits servers, switches, and networking devices that need continuous, high-quality AC power in a small footprint. At about 430 x 602 x 85mm, it fits where space is tight.

Online Double-Conversion Technology in the GXT4-3000RT230E

The GXT4-3000RT230E regulates power continuously through its inverter and does not wait for an outage to switch to battery. Output stays clean, with zero transfer time. If utility power fails, the critical load continues on a seamless flow of power. This is the highest level of protection available in this capacity range.

Rack/Tower Convertible Design of the GXT4-3000RT230E

The 2U chassis fits a standard rack or stands as a tower, so it adapts to the site’s layout. Rack mounting hardware is bundled with this class of GXT4 model, which speeds installation.

Battery Backup and Hot-Swappable Batteries on the GXT4-3000RT230E

The unit uses valve-regulated, non-spillable lead-acid batteries. Typical runtime is around 3 minutes at full load, and it is longer at lighter loads. That window lets teams save data, shut down safely, or hand over to a generator. The batteries are replaceable and hot-swappable, so servicing doesn’t require powering down protected equipment.

Programmable Outlets on the GXT4-3000RT230E

The unit provides 6 x C13 outlets and 1 x C19 outlet, with a C14 input connection. Two independently programmable pairs of outlets let you control power to multiple devices. Less critical loads can shut down first so the battery lasts longer for the equipment that matters most. The same controls let you power-cycle hung equipment remotely.

Eco-Mode Efficiency of the GXT4-3000RT230E

A selectable Eco-Mode improves energy efficiency when conditions allow. You choose when to trade a little protection for lower energy use, which helps reduce operating costs. Some GXT4 models are also ENERGY STAR qualified.

Communication and Monitoring on the GXT4-3000RT230E

The unit offers USB, RS232, and a terminal communication block, plus an IntelliSlot port for SNMP network management cards. Multilink software supports graceful shutdown of connected computers. An optional Unity card adds compatibility with environmental sensors for temperature, humidity, door status, and more. An LCD shows status at a glance.

Who Should Choose the GXT4-3000RT230E

The GXT4-3000RT230E suits small and mid-sized businesses, IT departments, and edge deployments that need true online protection at 3kVA with rack or tower flexibility. It is especially valuable for organizations that have outgrown line-interactive UPS units and want zero-transfer-time protection.

Final Thoughts on the GXT4-3000RT230E

For businesses that won’t compromise on power quality, the Liebert GXT4-3000RT230E combines true online double-conversion protection, flexible 2U rack/tower deployment, hot-swappable batteries, and programmable outlets. Selectable Eco-Mode and flexible communication options round out the package. For organizations protecting 3000VA of critical equipment, it is a smart and capable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv Liebert EXS 10kVA: Ultimate Protection

Small data rooms, IT closets, and branch sites need dependable three-phase protection without a big footprint or a complicated install. The Vertiv Liebert EXS ITC101A0100A00A provides 10kVA of true double-conversion online protection in a 0-minute autonomy configuration. It is built for sites that pair the UPS with external battery infrastructure.

Introducing the ITC101A0100A00A

The ITC101A0100A00A is the entry point to Vertiv’s Liebert EXS series, an optimized, integrated three-phase UPS platform designed for high efficiency. At 10kVA, it suits small data rooms, IT closets, VoIP systems, and branch storage or security infrastructure. It is a standalone unit that delivers serious power protection in a compact chassis.

0-Minute Autonomy Design of the ITC101A0100A00A

Instead of shipping with a fixed internal battery bank, the ITC101A0100A00A is configured for 0-minute autonomy. It is built to connect to external battery cabinets or existing backup infrastructure. Contractors, integrators, and end users can size runtime to the actual outage risk instead of committing to internal battery capacity up front.

Double-Conversion Efficiency Up to 96.2% in the ITC101A0100A00A

The ITC101A0100A00A reaches double-conversion efficiency of up to 96.2%, which cuts operating costs and lowers the environmental impact of continuous online protection. Power quality stays high, with the continuous regulation and zero transfer time that double-conversion technology provides.

Compact Footprint Engineering in the ITC101A0100A00A

The Liebert EXS platform is a monolithic, transformer-free UPS with a unity output power factor and high power density. It delivers a large amount of active power while keeping the footprint small. That avoids the oversized installation space older three-phase UPS systems often needed.

Output Power Factor and Clean Power Delivery on the ITC101A0100A00A

With an output power factor of up to 1, the ITC101A0100A00A makes its full rated capacity usable as active power. Input current total harmonic distortion (THDi) correction delivers clean power to protected loads and limits the electrical noise the UPS sends back into the facility’s power infrastructure.

Integrated Manual Bypass and Breaker Protection on the ITC101A0100A00A

Built-in safeguards include an integrated manual bypass and integrated input and output breakers and switches. Maintenance gets easier, and teams have a reliable way to handle fault conditions or service the unit without leaving connected equipment exposed.

Parallel Capability of the ITC101A0100A00A

An integrated parallel load bus and synchronization port (LBS) lets the ITC101A0100A00A work in parallel with additional compatible units. Facilities can add capacity or build in redundancy later, which protects the original investment as needs grow.

Battery Charging and Standalone Design of the ITC101A0100A00A

A battery charger rated up to 13A supports efficient charging of connected external battery banks. The standalone design combines the UPS and its distribution and communications needs into one easy-to-install, easy-to-operate unit. That simplicity helps contractors and integrators working in limited space.

Who Should Choose the ITC101A0100A00A

The ITC101A0100A00A suits small data rooms, IT closets, VoIP systems, and branch facilities that need dependable 10kVA three-phase protection and the freedom to design their own external battery runtime. It is especially valuable for organizations standardizing on external battery infrastructure or planning modest parallel expansion.

Final Thoughts on the ITC101A0100A00A

For small sites that need real three-phase protection without an oversized footprint or fixed internal batteries, the Vertiv Liebert EXS ITC101A0100A00A combines double-conversion reliability, high efficiency, and runtime flexibility. Parallel capability, integrated bypass protection, and a scalable approach to battery infrastructure make it a smart choice for small data rooms and branch facilities investing in 10kVA three-phase power protection.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Vertiv Liebert GXT5-6000IRT5UXLE: Ultimate Power

Businesses running mission-critical servers and networking infrastructure need power protection that holds up under pressure. The Vertiv Liebert GXT5-6000IRT5UXLE offers 6kVA/6kW of true online double-conversion protection at 230V in a flexible 5U rack/tower design. It guards essential IT equipment against the common forms of power disturbance.

Introducing the GXT5-6000IRT5UXLE

The GXT5-6000IRT5UXLE is part of Vertiv’s GXT5 series, a single-phase online double-conversion UPS family. It provides premium protection against power outages, along with continuous power conditioning, in a compact and flexible package. It suits critical infrastructure in both centralized and edge network applications.

Online Double-Conversion Protection in the GXT5-6000IRT5UXLE

The GXT5-6000IRT5UXLE uses true online double-conversion architecture. It regulates power continuously through the inverter and does not wait for an outage to switch to battery. The output is a clean, tightly regulated sine wave with zero transfer time. Connected equipment is shielded from outages, voltage drops, overvoltage, and distortion.

Unity Power Factor (1.0) on the GXT5-6000IRT5UXLE

The unit has a unity power factor of 1.0, so all 6kVA of capacity is available as 6kW of usable power. That means more connected equipment per unit, with less need to oversize the UPS. It translates into real savings in space and cost.

Rack/Tower Flexibility of the GXT5-6000IRT5UXLE

The 5U chassis converts between rack and tower mounting. Facility teams can fit it into a standard server rack or run it as a standalone tower, whichever the site layout calls for. IT teams are not forced into one rigid installation approach.

Battery Runtime and Charging on the GXT5-6000IRT5UXLE

At full load, the GXT5-6000IRT5UXLE provides about 5.5 minutes of runtime, and roughly 14.5 minutes at half load. The battery charger is rated at 2.25A by default and up to 5A at maximum. Matching external battery cabinets can add runtime when an outage may run long, so you don’t need a different UPS model for longer backup.

Energy Star Efficiency of the GXT5-6000IRT5UXLE

The GXT5 series is ENERGY STAR 2.0 certified for higher efficiency. That delivers real energy savings and lower running costs even in full online double-conversion mode.

Remote Management and Monitoring on the GXT5-6000IRT5UXLE

Streamlined remote monitoring is part of the GXT5 platform. It supports faster deployment and accurate runtime information through compatible network communication cards. IT teams can track power status, battery health, and load conditions without checking the unit in person.

Warranty Coverage for the GXT5-6000IRT5UXLE

The unit comes with Vertiv’s 3-year factory warranty, and an optional 2-year extension gives up to 5 years of total coverage. That reflects confidence in long-term reliability and adds peace of mind for a critical infrastructure investment.

Who Should Choose the GXT5-6000IRT5UXLE

The GXT5-6000IRT5UXLE suits data centers, server rooms, and businesses in banking, healthcare, education, and retail that need dependable, high-quality online power protection at 6kVA. It is especially valuable for organizations that want rack/tower flexibility together with strong energy efficiency and scalable runtime.

Final Thoughts on the GXT5-6000IRT5UXLE

For businesses that won’t compromise on power quality, the Vertiv Liebert GXT5-6000IRT5UXLE combines true online double-conversion protection, unity power factor, and flexible rack/tower deployment. ENERGY STAR certified efficiency, scalable external battery runtime, and strong warranty backing make it a smart, capable investment for protecting 6kVA of critical infrastructure.

CONTACT US @ TIACO TECHNOLOGIES.