Affordable, Everyday Protection: The APC BV800I-MS

Everyday electronics — a personal computer, a router, a modem — don’t need enterprise power protection, but they still deserve genuine backup power when the grid fails. The APC BV800I-MS is built precisely for that need: compact, budget-friendly protection that handles the everyday power problems homes and small offices actually face.

What the APC BV800I-MS Delivers

The APC BV800I-MS is a battery backup and surge protector for electronics and computers, delivering 450 Watts / 800 VA of output power capacity — well-suited for safeguarding personal computers, networking equipment, modems, routers, and home entertainment systems. Output connections consist of 4 universal receptacles, all of which provide both battery backup and surge protection, meaning every outlet on the unit genuinely contributes to the protection it offers rather than being split into separate protected and unprotected groups.

APC BV800I-MS Technical Specifications

The unit operates on line-interactive topology with a stepped approximation to a sinewave waveform, and a transfer time of 6ms typical, 10ms maximum — fast enough that most connected electronics won’t notice the switch to battery power. Input frequency auto-senses across 50/60 Hz ±5 Hz, with an input voltage range of 170–280V for main operations, giving it real tolerance for the kind of voltage instability common on many home and small-office circuits.

Runtime is honest and predictable for a unit this size — typically around 2.5 minutes at 240W, 9 minutes at 180W, and 13 minutes at 120W load, giving you a clear picture of what to expect depending on exactly how much you’re actually running through it. The internal 7Ah lead-acid battery has an expected life of 3 to 5 years, with a typical recharge time of 8 hours.

Automatic Voltage Regulation Built Into the APC BV800I-MS

Automatic Voltage Regulation automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment, stabilizing the everyday dips and surges that would otherwise stress connected electronics — all without drawing on the battery, which stays reserved for genuine outages. This is one of the standout features of the BV800I-MS, offering real protection against the kind of voltage instability many regions experience on a routine basis.

Physical Design Built for Small Spaces

The unit is genuinely compact, measuring roughly 9.25 x 16.05 x 30.5cm and weighing just 5.3kg — light and small enough to sit comfortably on a desk, tuck into a corner, or mount to a wall without taking up meaningful space. Outlets are spaced widely to allow for the easy connection of bulky AC/DC power transformers, a small but genuinely practical detail for anyone whose setup includes larger wall-wart style adapters.

Surge and Phone-Line Protection

The APC BV800I-MS carries a surge energy rating of 156 Joules, giving it solid protection against voltage spikes for a unit this size, and it provides protection of connected equipment from power surges traveling on telephone lines — a genuinely useful, often-overlooked feature for anyone still running a modem or fax line alongside their networking equipment.

Clear Status and Timely Alerts

An LED status display quickly conveys unit and power status, distinguishing between online and on-battery operation at a glance, while audible alarms provide notification of changing utility power and UPS power conditions — including a distinctive low battery alarm and an overload continuous tone alarm, so you’re never caught off guard by a developing problem.

Intelligent Battery Management

Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging — genuinely extending the internal battery’s useful service life well beyond what basic charging circuitry typically achieves.

Genuinely Certified and Backed by Warranty

The unit is safety-agency approved, ensuring it has been tested and approved to work safely with connected service provider equipment and within its specified environment, and it carries CE certification along with a 2-year warranty — solid, independently verified assurance behind an affordably priced unit.

The Bottom Line on the APC BV800I-MS

For personal computers, routers, modems, and everyday home entertainment setups, the APC BV800I-MS delivers exactly the kind of dependable, budget-conscious protection those environments actually need: AVR-based voltage regulation, phone-line surge protection, clear status and alarm indicators, and a compact, wall-mountable design. It offers the perfect balance between affordability and protection for everyday devices — a genuinely valuable investment for anyone seeking peace of mind and consistent power in their daily life.

CONTACT US @ TIACO TECHNOLOGIES.

Simple, Dependable Backup for Home and Office: The APC BV1000I-MS

Not every environment needs enterprise-level UPS features — most homes and small offices just need dependable, easy-to-live-with backup power that handles everyday voltage problems without complication. The APC BV1000I-MS delivers exactly that: straightforward line-interactive protection built to fit comfortably into whatever space it’s protecting.

What the APC BV1000I-MS Delivers

The APC BV1000I-MS is an Easy UPS that provides power protection for unstable power conditions in homes and small offices, ensuring consistent and reliable connectivity at the most critical moments. It delivers 600 Watts / 1.0kVA of output power capacity through 4 universal receptacles, all of which provide both battery backup and surge protection — meaning every outlet on the unit is genuinely useful, not split between protected and unprotected connections.

APC BV1000I-MS Technical Specifications

The unit operates on line-interactive topology with a stepped approximation to a sinewave waveform, delivering a transfer time of 6ms typical and 10ms maximum — fast enough that most connected equipment won’t even register the switch to battery power. Output frequency runs at 50/60 Hz ±1 Hz, and it carries a surge energy rating of 156 Joules, giving it solid baseline protection against voltage spikes for a unit this size.

Battery specifications reflect genuinely useful backup capacity: a 9.0Ah lead-acid battery (12V, model RBC17) delivers a runtime of approximately 8 hours in extended configurations, with a recharge time of around 8 hours as well. Physically, the unit is compact and practical, measuring roughly 9.25 x 16.05 x 30.5cm and weighing just 5.7kg — light enough to easily reposition, and small enough to genuinely disappear into a home office or small equipment closet.

Automatic Voltage Regulation Built Into the APC BV1000I-MS

Automatic Voltage Regulation (AVR) automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment — correcting the everyday dips and surges most home and small-office power supplies experience. This preserves battery life and maximizes runtime by correcting low voltages without discharging the battery, meaning the unit’s limited battery capacity is reserved specifically for genuine outages rather than being drained by routine grid fluctuations.

Built for Real Homes and Offices

Keep your essential devices protected and running during power interruptions — the APC BV1000I-MS is genuinely well-suited for PCs, routers, CCTV systems, POS terminals, and general home electronics. A slim, modern design can be positioned upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor, and wall-mount holes allow flexibility for setup in tight locations — genuinely practical touches for a unit meant to live in a home or small office rather than a dedicated server room.

Genuine Overload and Fault Protection

The APC BV1000I-MS is built to safeguard your equipment from overloads, excessive mains voltages, short circuits, installation mishaps, and battery damage due to low voltage situations — a comprehensive set of protections that go well beyond basic surge suppression, addressing several distinct failure modes a home or small office might realistically encounter.

Intelligent Battery Charging

Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging — extending the real-world service life of the internal battery well beyond what basic charging circuitry typically achieves, and reducing how often the battery needs replacing over the life of the unit.

Genuinely Safety-Certified

Safety-agency approval ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment, and the unit is CE and EN/IEC 62040 certified — real, independently verified assurance rather than just a manufacturer’s claim.

Backed by a Solid Warranty

The APC BV1000I-MS comes with a 2-year warranty, giving genuine confidence behind a unit built for everyday reliability rather than occasional, dramatic protection.

The Bottom Line on the APC BV1000I-MS

For homes, small offices, and the everyday electronics that keep them running — PCs, routers, POS terminals, and CCTV systems — the APC BV1000I-MS delivers exactly the kind of dependable, uncomplicated protection those environments actually need: solid AVR-based voltage regulation, comprehensive fault protection, and a slim, wall-mountable design that fits in wherever it’s needed. It’s straightforward, trustworthy backup power without unnecessary complexity.

CONTACT US @ TIACO TECHNOLOGIES.

Compact Protection for Focused Applications: The APC SUA750I

Not every setup needs a large-capacity UPS — small offices, home workstations, and point-of-sale terminals often just need dependable, no-nonsense power protection sized to fit the equipment they’re actually running. The APC SUA750I delivers exactly that, bringing genuine Smart-UPS reliability to a compact 750VA footprint.

What the APC SUA750I Delivers

The APC SUA750I is described as intelligent and efficient network power protection from entry level to scalable runtime — ideal for servers, point-of-sale systems, routers, switches, hubs, and other network devices. Output power capacity comes in at 500 Watts / 750 VA, with connections including 6 IEC 320 C13 outlets and 2 IEC jumpers, all wired through a standard IEC-320 C14 inlet.

Power Quality Behind the APC SUA750I

Output voltage distortion stays under 5% at full load, with output frequency synchronized to mains within 47-53Hz for 50Hz nominal operation, and a crest factor of up to 5:1 supporting a genuine sine wave output. Nominal output voltage is configurable for 220V, 230V, or 240V — real flexibility for deployments across different regional power standards.

Runtime and Physical Specifications

At full load, the unit provides approximately 7 minutes of runtime, extending to roughly 24 minutes at half load — enough time to complete a safe shutdown during a brief outage, or bridge to generator activation if one is available. The 3-hour recharge time ensures quick recovery once utility power returns. Physically, the compact tower design measures 13.7 x 19.6 x 37.1 cm and weighs 13.18 kg, small enough to tuck comfortably into a home office desk setup or a small server room without commanding much space.

Automatic Voltage Regulation That Protects Battery Life

Automatic Voltage Regulation (AVR) maintains safe voltage levels without using battery power, extending the life of the UPS and connected devices. That’s a genuinely important detail — by correcting everyday sags and surges in real time rather than switching to battery, the APC SUA750I preserves its battery reserve specifically for real outages, extending the useful life of the unit as a whole.

Network-Grade Power Conditioning

The APC SUA750I offers network-grade power conditioning with a 320-Joule surge energy rating and full-time multi-pole noise filtering with 0.3% IEEE surge let-through — solid, measurable protection against both dramatic voltage spikes and the quieter electrical noise that can degrade sensitive electronics gradually over time, even without a single dramatic surge event.

Built for Fast, Practical Servicing

Battery replacement without tools allows quick, easy battery replacement, while front-access servicing simplifies installation and maintenance while minimizing space requirements — genuinely practical design choices for a unit that’s often installed in tight spaces like under a desk or in a compact equipment closet where rear or side access isn’t realistic.

Communication and Software Management

The unit is equipped with communication ports including USB and serial connections for connecting to a computer or network for remote monitoring and management using APC’s PowerChute software. Disconnected battery notification warns you if the battery isn’t available to provide backup power, adding a layer of proactive awareness before an actual outage reveals a problem you didn’t know you had.

Built for Real-World Small-Scale Applications

The APC SUA750I is genuinely versatile across small-scale environments — suited to small offices and home offices for protecting computers, networking equipment, and peripherals; retail environments for safeguarding point-of-sale systems and electronic cash registers; and home use for ensuring uninterrupted power to personal computers, routers, and entertainment systems.

Proven, Trusted Design

As part of the broader Smart-UPS line, the SUA750I carries a strong reputation, with APC’s Smart-UPS trusted globally for compact size, reliability, and ease of use in small-scale setups — the kind of consistent, dependable performance that comes from decades of proven engineering rather than a single generation of good reviews.

The Bottom Line on the APC SUA750I

For small offices, home workstations, point-of-sale terminals, and other focused, moderate-load applications, the APC SUA750I delivers dependable, well-engineered protection in a genuinely compact footprint — real AVR-based voltage regulation, solid surge and noise filtering, tool-free battery servicing, and PowerChute software management. It’s a practical, no-compromise choice for anyone who needs reliable backup power without paying for capacity they’ll never use.

CONTACT US @ TIACO TECHNOLOGIES.

Clean, Efficient, Dependable: The APC SMC1000I

Sensitive equipment doesn’t need enormous backup capacity to deserve serious power protection — it needs consistently clean power, smart voltage regulation, and a UPS that quietly does its job without complication. The APC SMC1000I delivers exactly that at 1000VA, bringing the trusted Smart-UPS C design down to a size and price point that fits comfortably into home offices, small server rooms, and entry-level IT deployments.

What the APC SMC1000I Delivers

The APC SMC1000I is a reliable, line-interactive uninterruptible power supply designed for entry-level servers, networking equipment, and sensitive electronics in small business or home office environments. It provides backup power with a pure sine wave output and features Automatic Voltage Regulation (AVR) to protect equipment from power fluctuations. Load capacity comes in at 1000VA / 600W, with connections including 8x IEC 320 C13 outlets and 2x IEC jumper cables — a genuinely flexible mix for connecting servers, point-of-sale systems, routers, switches, and other network devices.

Runtime and Recharge Specifications

The unit provides approximately 6 minutes of runtime at full load, extending to around 16 minutes at half load, with a typical battery recharge time of 3 hours. Input voltage range runs from 170V AC to 300V AC, giving it real tolerance for unstable grid conditions, and it carries a surge energy rating of 455 Joules — solid protection against the kind of transient spikes that can quietly degrade or destroy sensitive electronics over time.

Automatic Voltage Regulation Built Into the APC SMC1000I

Extended-range automatic voltage regulation gives higher application availability by correcting low and high voltage conditions without using the battery — meaning the everyday sags and surges common on many grids get handled instantly, without ever touching the battery reserved for genuine outages. That distinction matters enormously for battery longevity: a UPS that treats every minor fluctuation as an emergency wears its battery down far faster than one that corrects the problem in real time through AVR alone.

Efficiency That Fits Modern Server Hardware

Smart-UPS units have extremely high efficiency at low, medium and high load levels, making them ideal for today’s multi-core or virtualized servers that have varying load consumption — a genuinely important detail for anyone running modern, power-scaling equipment rather than a single fixed-draw appliance. High online efficiency reduces utility costs and generates less heat, a benefit that compounds over the unit’s full operating lifespan.

Pure Sine Wave Output for Sensitive Electronics

Pure sine wave output on battery simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics — ensuring modern equipment runs exactly as it would on clean utility power, even during a battery event, rather than being exposed to a rougher, stepped waveform that lesser UPS units fall back on.

Monitoring and Status at a Glance

An LCD status display provides key UPS status at a glance, with multiple status indicators including load and battery bar graphs, while a 16-segment LED display gives additional visual confirmation of unit and power status. Audible alarms actively let you know if the unit is on battery, if the battery is low, or if there’s an overload condition — clear, immediate warning before a problem becomes a genuine crisis.

Intelligent Battery Management

Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging, which prolongs battery life by regulating the charge voltage according to battery temperature. Periodic automatic self-test ensures early detection of a battery that needs to be replaced, and disconnected battery notification warns when a battery isn’t available to provide backup power — catching problems well before an actual outage puts the battery to the real test.

Connectivity and Management Options

Serial connectivity provides management of the UPS via a serial port, and USB connectivity offers management via a USB port, giving flexible options for integrating the unit into existing monitoring workflows. The unit is also network manageable, providing remote power management over the network, and it includes a Smart-Slot interface for additional manageability options as your monitoring needs grow. Automatic restart of loads after UPS shutdown means connected equipment automatically starts back up once utility power returns — no manual intervention required.

Proven at Scale

Over 20 million units sold reflects the broader trust behind the Smart-UPS line — APC’s award-winning Smart-UPS is the most popular UPS in the world for servers, storage, and network power protection, trusted to protect critical data and equipment from power problems by supplying clean and reliable network-grade power.

The Bottom Line on the APC SMC1000I

For entry-level servers, networking equipment, and sensitive electronics in home offices or small businesses, the APC SMC1000I delivers dependable, efficient protection without unnecessary complexity — real AVR-based voltage regulation, pure sine wave output, intelligent temperature-compensated battery charging, and clear LCD status monitoring. It’s a compact, trustworthy choice backed by decades of proven Smart-UPS engineering, built for exactly the kind of modest but genuinely critical loads most small setups actually need to protect.

CONTACT US @ TIACO TECHNOLOGIES.

Award-Winning Reliability at Entry Level: The APC SUA1000I

Small servers, routers, and desktop workstations deserve the same trusted protection larger infrastructure gets — just scaled to match. The APC SUA1000I brings genuine Smart-UPS reliability down to a 1000VA footprint, delivering clean, regulated power for exactly the kind of moderate loads found in home offices, small businesses, and edge IT deployments.

What the APC SUA1000I Delivers

The APC SUA1000I is a line-interactive tower UPS offering 670 Watts / 1000 VA of output power capacity, with nominal output voltage configurable for 220V, 230V, or 240V. APC Smart-UPS protects critical data by supplying reliable, network-grade power, and this award-winning line is built as the perfect UPS for protecting business-critical servers, voice and data networks, point of sale systems, retail and bank back offices, and ATMs — a genuinely broad range of applications for a compact tower unit.

Power Quality Behind the APC SUA1000I

Output voltage distortion stays under 5% at full load, with output frequency synchronized to mains within 47-53Hz for 50Hz nominal operation, and a crest factor of up to 5:1 supporting a genuine sine wave output waveform. That clean sine wave output ensures compatibility with a wide range of devices, including servers, networking equipment, and gaming consoles, avoiding the compatibility issues cheaper UPS technology can cause with modern active PFC power supplies.

Connections and Physical Specifications

The APC SUA1000I comes with 8 IEC 320 C13 outlets and 2 IEC jumper cables, along with a DB-9 RS-232 interface port, a SmartSlot, and USB connectivity — a genuinely flexible connection set for a unit this size. It ships complete with a CD containing software, a Smart-UPS signalling RS-232 cable, a USB cable, and a user manual, ready for integration into a managed IT environment from day one.

Runtime and Battery Configuration

The unit is equipped with 2 x 11Ah built-in batteries, delivering approximately 6 minutes of runtime at full load and around 20.6 minutes at 50% load — figures that give you a clear, honest picture of what to expect under real-world conditions rather than an idealized best case. The lead-acid battery carries an expected lifespan of 3 to 5 years, and efficiency runs as high as 96%, reducing both energy consumption and the heat generated during normal operation.

Automatic Voltage Regulation That Protects Battery Life

Like the rest of the Smart-UPS family, the APC SUA1000I doesn’t treat every voltage fluctuation as an emergency requiring battery power. Its AVR feature stabilizes voltage fluctuations, reducing battery usage and extending battery life — particularly valuable in regions with inconsistent power supply, where it ensures devices receive safe, consistent voltage levels without unnecessary battery cycling. Input voltage tolerance runs from 160 to 285V in standard configuration, with an adjustable range extending to 151-302V for genuinely unstable grid environments.

Intelligent Battery Management

APC’s precision charging system adjusts voltage based on battery temperature, maximizing battery performance and life — meaningfully extending the real-world service life of the battery well beyond what basic charging circuitry would achieve. Status indicators include LED displays with load and battery bar graphs, giving clear at-a-glance visibility into how the unit and connected battery are performing.

Surge Protection and Software Management

The APC SUA1000I includes 320 Joules of surge protection with full-time multi-pole noise filtering, safeguarding connected equipment from both dramatic spikes and the quieter electrical noise that can degrade sensitive electronics over time. Included PowerChute Business Edition software supports Microsoft Exchange, SQL Server, IIS, and more, giving IT teams genuine software-based management and shutdown capability rather than relying solely on hardware indicators.

Certified and Trusted

With certifications including CE, VDE, UL, FCC, and RoHS compliance, the APC SUA1000I ensures safety and environmental responsibility that goes beyond a basic manufacturer claim — genuine, independently verified assurance behind the hardware.

The Bottom Line on the APC SUA1000I

For desktops, routers, small servers, and point-of-sale systems that need dependable, trusted power protection without unnecessary size or cost, the APC SUA1000I delivers exactly what its award-winning reputation promises: solid AVR-based voltage regulation, pure sine wave output, intelligent temperature-compensated battery charging, and genuine PowerChute software integration. It’s compact, reliable protection built on decades of proven Smart-UPS engineering — a dependable choice for any small setup that simply can’t afford to lose power without warning.

CONTACT US @ TIACO TECHNOLOGIES.

Trusted, Efficient, and Built to Last: The APC SMC2000I

There’s a reason APC’s Smart-UPS line has become the default choice for millions of businesses worldwide — it consistently delivers dependable, well-engineered protection without unnecessary complexity. The APC SMC2000I continues that legacy at 2000VA, offering line-interactive protection genuinely suited to servers, networking equipment, and sensitive electronics in real-world business environments.

What the APC SMC2000I Delivers

The APC SMC2000I is a reliable, line-interactive uninterruptible power supply designed for small to medium-sized businesses, home offices, and IT environments, offering robust power protection and user-friendly features ideal for safeguarding servers, networking equipment, and sensitive electronics. It delivers 1.3kW/2kVA of line-interactive power protection through a tower-only design, with outlets configured as 6x IEC 320 C13 and 1x IEC 320 C19, along with 2x IEC jumper cables — a genuinely flexible mix for connecting a real assortment of business equipment.

Runtime and Recovery Specifications of the APC SMC2000I

The unit provides backup runtime of approximately 5 minutes at full load, extending to around 20 minutes at half load, with a typical battery recharge time of 3 hours. Physically, it measures 8.5 inches high, 6.7 inches wide, and 17.3 inches deep, weighing roughly 60.63 lbs — substantial enough to feel like genuine infrastructure while still comfortably fitting into a home office or small server closet.

Automatic Voltage Regulation Built Into the APC SMC2000I

Like the rest of the Smart-UPS C family, the SMC2000I doesn’t wait for a full outage to protect your equipment. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation — meaning everyday sags and surges get corrected instantly, without ever touching the battery reserved for genuine outages. Boost and Trim AVR gives higher application availability by correcting low and high voltage conditions without using the battery, a genuinely important distinction for extending the unit’s real-world battery lifespan.

Efficiency That Actually Saves Money

The APC SMC2000I operates with a patented green operating mode that bypasses unused electrical components in good power conditions, achieving efficiencies over 97% — a genuinely impressive figure that reduces utility costs and generates less heat during normal operation. Smart-UPS was the first network UPS to be Energy Star certified, reflecting a long-standing commitment to efficiency rather than a recent marketing addition.

Clean Power for Sensitive Electronics

Pure sine wave output on battery simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics — meaning modern server hardware runs exactly as it would on clean utility power, even during a battery event, rather than being exposed to a rougher, stepped approximation.

Monitoring That Keeps You Ahead of Problems

An LCD Status Display provides key UPS status at a glance, with multiple status indicators including load and battery bar graphs — giving you clear, immediate visibility without digging through menus. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature-compensated charging, while a dynamic battery replacement date indicator and automatic self-tests ensure battery reliability and warn in advance of needing replacement — catching problems well before an actual outage puts the battery to the real test.

Serviceability Without Downtime

Convenient, easy-to-connect, hot-swappable battery modules provide battery replacement without powering down, and user-replaceable batteries increase availability by allowing a trained user to perform upgrades and replacements directly, reducing Mean Time to Repair. Cold-start capability provides temporary battery power even when utility power is already out, useful for bringing equipment online during an active outage.

Adaptable to Real-World Power Environments

Adjustable voltage-transfer points maximize useful battery life by widening the input voltage window or tightening output voltage regulation, and adjustable voltage sensitivity provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications — genuinely useful flexibility for businesses operating outside of ideal, textbook grid conditions.

Proven Reliability at Scale

Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold — a track record that reflects genuine, sustained confidence from IT professionals worldwide, not just a single generation of good reviews.

The Bottom Line on the APC SMC2000I

For small to medium businesses, home offices, and IT environments that need dependable, efficient power protection without unnecessary complexity, the APC SMC2000I delivers exactly what its reputation promises: solid AVR-based voltage regulation, pure sine wave output, over 97% green-mode efficiency, and hot-swappable, user-replaceable batteries. It’s proven, trustworthy protection backed by one of the most established names in the industry — a genuinely safe, well-reasoned choice for anyone safeguarding critical business equipment.

CONTACT US @ TIACO TECHNOLOGIES.

Precision Power Protection for Server Rooms and Network Closets: The APC SRT3000XLI

Server rooms and network closets face the same fundamental risk as much larger data centers — power that isn’t clean or dependable enough for the equipment relying on it. The APC SRT3000XLI brings genuine high-density, double-conversion protection to that scale, delivering the same rigorous power quality larger enterprise UPS units offer, sized right for a 3kVA critical load.

What the APC SRT3000XLI Delivers

The APC Smart-UPS SRT 3000VA 230V (SRT3000XLI) is a high-density, double-conversion online Uninterruptible Power Supply that provides reliable, pure sine wave power protection for critical electronic equipment in server rooms and network closets. Power capacity comes in at 2700 Watts / 3000VA, with output voltage held to a tight ±3% tolerance — genuinely precise regulation that protects sensitive electronics from the kind of subtle voltage drift that degrades performance over time even without an outright outage.

Connections and Physical Specifications of the APC SRT3000XLI

The unit is genuinely well-equipped for real IT equipment: output connectors include 8x IEC 60320 C13 and 2x IEC 60320 C19 outlets, giving you room for both standard servers and higher-draw devices from a single unit. Input connectors support IEC 60320 C20, BS 1363A, and Europlug CEE 7/16 standards, reflecting genuine international flexibility. Physically, the tower measures approximately 43.2cm high and 63.5cm deep, weighing around 69 lbs (31kg) — substantial enough to feel like serious hardware, but still practical for a server closet or small equipment room.

Power Quality Behind the APC SRT3000XLI

As part of the broader Smart-UPS On-Line family, the SRT3000XLI is a versatile UPS developed for the harshest power conditions in the world, providing high density, true double-conversion on-line power protection for servers, voice/data networks, medical labs, and light industrial applications. The Smart-UPS On-Line family provides a reliable source of uninterruptible power even in demanding environments, including a very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction — genuinely enterprise-grade characteristics scaled to a 3kVA footprint. Input voltage tolerance is adjustable from 100 to 275V, giving real headroom for unstable grid conditions.

Runtime and Scalability of the APC SRT3000XLI

Out of the box, the unit provides approximately 4 minutes of runtime at full load — enough for an immediate, orderly shutdown sequence or to ride out a very brief interruption. But when business-critical systems require runtime in hours, not minutes, the Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands, with expandable runtime achieved by adding up to 10 external battery packs. That scalability means the APC SRT3000XLI isn’t locked into a fixed runtime figure — it can grow directly alongside your actual risk tolerance for extended outages.

Management Software Built for IT Environments

The included PowerChute management software provides unattended graceful shutdown of network operating systems, ensuring that if utility power stays down past available runtime, connected servers shut down cleanly rather than losing power abruptly mid-operation. Networking connectivity includes RS-232 and USB interfaces, giving IT teams flexible options for monitoring and management through their existing tools.

Rack/Tower Flexibility

The APC SRT3000XLI is available in a rack/tower convertible form, and compatible mounting hardware — including the 2-Post Mounting Rail Kit (SRTRK3) and the 19-inch Rail Kit for SRT 1/1.5/2.2/3kVA units (SRTRK4) — lets the same unit sit on a floor or slot directly into a standard rack as your infrastructure needs evolve.

Reliability Backed by Real Standards

The APC SRT3000XLI meets ENERGY STAR environmental standards, reflecting genuine efficiency credentials rather than just a marketing claim. It’s backed by a solid manufacturer warranty, and it’s compatible with genuine APC replacement battery cartridges — such as the APCRBC152 — that restore the unit to original performance specifications once the internal battery eventually ages out, extending its useful life well beyond the initial warranty period.

The Bottom Line on the APC SRT3000XLI

For server rooms, network closets, and small-to-medium IT deployments that need genuine double-conversion protection without the scale of a much larger UPS, the APC SRT3000XLI delivers real, precise power quality — tight voltage regulation, flexible outlet configuration, rack/tower convertibility, and expandable runtime through external battery packs. It’s dependable, enterprise-grade protection sized exactly for the critical equipment most businesses actually need to protect.

CONTACT US @ TIACO TECHNOLOGIES.

High-Density Protection for Business-Critical Systems: The APC SRT6KXLI

At 6kVA, a UPS moves beyond simply bridging outages — it becomes a genuine load-bearing part of your critical infrastructure, capable of supporting real server clusters and demanding equipment racks. The APC SRT6KXLI delivers exactly that: high-density, true double-conversion protection built for IT professionals who need zero-compromise reliability.

What the APC SRT6KXLI Delivers

This APC Smart-UPS is designed for IT professionals or network administrators to maintain business uptime and continuity. This 6kVA on-line tower UPS provides pure sine wave power and extended runtime to support critical electronics during power disruptions. It delivers a 6kVA/6kW double-conversion on-line pure sine wave tower UPS, and it’s ideal for servers, storage, voice/data networks, medical labs, and light industrial applications — precisely the kind of infrastructure where even a momentary power gap can mean lost data or damaged equipment.

Power Quality Behind the APC SRT6KXLI

The APC SRT6KXLI holds harmonic distortion to less than 2%, with output frequency synchronized to mains within 50/60Hz ±3Hz — genuinely tight regulation that protects sensitive electronics from the subtle stress of dirty power. On the input side, the unit auto-senses network frequency across 40 to 70Hz and accepts adjustable input voltage limits from 100 to 275V, giving it real tolerance for unstable grid conditions. Customers with harsh power environments looking for extremely tight voltage and frequency regulation, internal bypass, and input power factor correction typical of double-conversion online topology get exactly that with this unit.

Outlets and Connections on the APC SRT6KXLI

The APC SRT6KXLI comes with hard-wire 3-wire (1P+N+E) input, 6x IEC 320 C13 and 4x IEC 320 C19 outlets, and 2x IEC jumper cables — a genuinely flexible mix that accommodates both standard servers and higher-draw equipment from a single unit. Physically, the tower measures roughly 43.2cm high, 17.4cm wide, and 71.94cm deep, weighing about 60kg — substantial, purpose-built hardware reflecting its serious capacity.

Flexible Deployment and Scalable Runtime

The APC SRT6KXLI is rack/tower convertible using a separately sold rail kit, letting the same unit sit on a server room floor or slot directly into a standard rack as your infrastructure evolves. High power internal chargers allow virtually unlimited additional matching battery packs to comply with the aggressive runtime demands of business-critical systems, and specifically, you can add up to 10 external battery packs (SRT192BP) for extended runtime — a genuine path to hours, not minutes, of backup power for facilities that need it.

Management Built for Serious IT Environments

The unit has an embedded Network Management Card for UPS network-based monitoring and management, and it comes with PowerChute Network Shutdown, which provides graceful shutdown of physical servers, virtual machines, and HCI clusters. An additional SmartSlot supports optional accessory cards such as a Dry Contact I/O card, and the UPS can connect to EcoStruxure IT or third-party centralized management platforms — meaning the APC SRT6KXLI integrates cleanly into whatever monitoring stack your team already relies on. It’s also InfraStructure Manager compatible, enabling centralized management via the APC InfraStructure Manager across larger deployments.

Efficiency and Battery Intelligence

The APC SRT6KXLI includes a patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature-compensated charging, and automatic self-tests ensure battery reliability while warning customers in advance of a needed replacement — catching problems well before an actual outage puts the battery to the test.

Serviceability Without Downtime

Convenient, easy-to-connect, hot-swappable battery modules provide battery replacement without powering down, and user-replaceable batteries increase availability by allowing a trained user to perform upgrades and replacements directly — reducing Mean Time to Repair without requiring a scheduled service visit.

Compatibility and Confidence

The APC SRT6KXLI provides pure sine wave output, which is recommended by server manufacturers using active power factor corrected (PFC) power supplies — ensuring full compatibility with modern, efficient server hardware. It’s safety agency tested and approved, meaning it meets or exceeds the industry’s most rigorous standards, and it comes with a 1-Year Secure Network Management Card subscription included, giving genuine value beyond the hardware itself.

The Bottom Line on the APC SRT6KXLI

For servers, storage systems, and mission-critical infrastructure that simply cannot tolerate a power gap, the APC SRT6KXLI delivers true double-conversion protection at real 6kVA capacity — flexible rack/tower deployment, scalable runtime up to 10 external battery packs, and enterprise-grade management through PowerChute and EcoStruxure IT integration. It’s the kind of dependable, high-density protection that IT professionals build their infrastructure around.

CONTACT US @ TIACO TECHNOLOGIES.

Centralized Three-Phase Protection at the Right Scale: The APC SUVTP20KH4B4S

Not every business needs a massive data-center-scale UPS, but plenty need more than a single-phase tower can deliver. The APC SUVTP20KH4B4S fills that space precisely — genuine three-phase, double-conversion protection at 20kVA, built for small data centers, retail operations, and regional offices that need serious continuity without unnecessary overbuild.

What the APC SUVTP20KH4B4S Offers

The APC SUVTP20KH4B4S Smart-UPS VT 20kVA Tower UPS offers centralized three-phase power protection with the reliability of the award-winning Smart-UPS family. It’s ideal for small data centers, large retail stores, regional offices, and dense power requirements — the kind of infrastructure where a single outage can mean lost sales, corrupted transactions, or costly operational disruption. The unit delivers 16kW output power capacity from its 20kVA rating, with nominal output voltage configurable for 380V, 400V, or 415V three-phase to match your facility’s exact electrical standard.

Availability Features Built Into the APC SUVTP20KH4B4S

Real business continuity depends on redundancy, and the APC SUVTP20KH4B4S is engineered around it. Dual mains input increases availability by allowing the UPS to be connected to two separate power sources, meaning a fault on one utility feed doesn’t automatically compromise your protection. The unit includes automatic and maintenance bypasses, along with scalable runtime and hot-swappable batteries for increased availability — a combination that keeps connected loads protected through both routine servicing and unexpected UPS-side faults.

Runtime and Battery Servicing

This configuration of the APC SUVTP20KH4B4S ships with 4 battery modules, and scalable runtime allows additional runtime to be quickly added as needed — a genuine path to extending backup time as your requirements grow, rather than replacing the entire unit. Hot-swappable batteries ensure clean, uninterrupted power to protected equipment while batteries are being replaced, and serviceability is greatly enhanced by user-replaceable batteries, meaning a trained technician can perform battery maintenance directly without an extended service window or specialized third-party support.

Efficiency That Lowers Total Infrastructure Cost

One of the more distinctive advantages of the APC SUVTP20KH4B4S is how its efficiency translates into broader savings. Low cost of ownership is achieved through best-in-class efficiency and a reduction in the rating of electrical infrastructure — wires, transformers, and generators — thanks to the Smart-UPS VT’s Soft Start feature. That’s a meaningful, often overlooked benefit: because the unit draws power more gently at startup, the surrounding electrical infrastructure can be sized smaller, lowering both upfront installation costs and long-term operating expense.

Built-In Bypass Protection

The APC SUVTP20KH4B4S has built-in automatic internal bypass, so mains supply continues reaching connected loads even if the UPS itself is faulty or experiencing a power overload condition. A modular design allows faster and easier maintenance, reducing both the complexity and downtime associated with servicing this kind of critical infrastructure.

Monitoring and Centralized Management

You get remote power management of the UPS over the network, as well as centralized management via the APC InfraStruXure Manager, giving IT and facilities teams genuine oversight without requiring someone physically present at the unit. LCD display, audible alarms, and LED status indicators enable straightforward monitoring and management directly at the unit, while a SmartSlot lets you customize its capabilities with optional management cards — including compatible options like temperature and humidity sensors, dry contact I/O cards, and network management cards with environmental monitoring.

Programmable Flexibility

Programmable frequency for compatibility with different input frequencies gives the APC SUVTP20KH4B4S genuine adaptability across regions and grid standards, rather than locking you into a single fixed configuration. Input power factor correction further minimizes installation costs by enabling the use of smaller generators and cabling — a real, practical benefit for facilities pairing the UPS with backup generation.

Battery Intelligence for Long-Term Reliability

Temperature-compensated battery charging prolongs battery life by regulating charge voltage according to battery temperature, and intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging. Together, these features meaningfully extend the real-world service life of the battery investment behind the unit.

Generator Compatible and Cold-Start Capable

The APC SUVTP20KH4B4S is generator compatible, ensuring clean, uninterrupted power to protected equipment when generator power is in use, and it’s cold-start capable, able to provide power even when starting from a fully de-energized state — genuinely useful flexibility for facilities that need to bring critical systems online during or immediately after an extended outage.

The Bottom Line on the APC SUVTP20KH4B4S

For small data centers, retail operations, and regional offices that need genuine three-phase, double-conversion protection without the scale (or cost) of a much larger system, the APC SUVTP20KH4B4S delivers dual mains input, hot-swappable and user-replaceable batteries, centralized network management, and efficiency-driven savings on surrounding electrical infrastructure. It’s dependable, right-sized continuity for the businesses that need serious power protection to match their serious operations.

CONTACT US @ TIACO TECHNOLOGIES.

Enterprise-Class Continuity for Growing Facilities: The APC SUVTP30KH4B4S

Between the compact protection of a small UPS and the massive scale of a full data-center system sits a critical middle tier — infrastructure serious enough to protect a genuine data center, retail operation, or regional office, without unnecessary overbuild. The APC SUVTP30KH4B4S occupies exactly that space, delivering real 30kVA three-phase double-conversion protection with the flexibility to scale as needs grow.

What the APC SUVTP30KH4B4S Is Built For

The APC SUVTP30KH4B4S is a high-capacity, three-phase in / three-phase out, high-efficiency UPS with a full suite of high-performance features. It offers 24kW output power capacity and is ideal for data centers, large retail stores, regional offices, and dense power requirements — environments where a single power failure can mean lost transactions, corrupted data, or genuinely costly downtime. Output power capacity comes in at 24.0kW / 30.0kVA, with nominal output voltage of 400V three-phase, configurable for 380V, 400V, or 415V depending on your facility’s exact electrical standard.

Power Quality Behind the APC SUVTP30KH4B4S

The unit’s Smart-UPS VT design uses double-conversion online topology with sine wave output, and holds efficiency at full load to an impressive 96.4% — meaning very little power is wasted even when the unit is working hardest. Output voltage distortion stays under 5% at full load, with output frequency synchronized to mains within 47-53Hz for 50Hz nominal operation. On the input side, it accepts a wide frequency range of 40 to 70Hz, giving it genuine tolerance for inconsistent grid conditions rather than a narrow, idealized operating window.

Availability and Redundancy Features of the APC SUVTP30KH4B4S

Real business continuity comes from redundancy, and the APC SUVTP30KH4B4S is built around it. Dual mains input increases availability by allowing the UPS to be connected to two separate power sources, meaning a failure on one utility feed doesn’t necessarily mean a loss of protection. The unit is parallel-capacity capable, increasing total power capacity by using multiple UPSs simultaneously, and parallel-redundant capable, powering connected equipment with multiple UPSs to increase system redundancy — genuine options for facilities planning to scale protection well beyond a single unit’s rated capacity.

Runtime, Batteries, and Serviceability

This configuration of the APC SUVTP30KH4B4S ships with 4 battery modules pre-installed, with a typical battery recharge time of around 5 hours. Scalable runtime allows additional runtime to be quickly added as needed, and hot-swappable batteries ensure clean, uninterrupted power to protected equipment while batteries are being replaced — meaning maintenance never becomes a source of downtime for the systems it’s protecting. The UPS also features a modular design that allows faster and easier maintenance, reducing the time and complexity involved in servicing critical power infrastructure.

Built-In Protection Against Faults and Overloads

The APC SUVTP30KH4B4S includes built-in automatic internal bypass, so mains supply continues reaching connected loads even if the UPS itself is faulty or experiences a power overload condition. Built-in maintenance bypass and built-in static bypass provide additional layers of protection, ensuring servicing or an internal fault never translates into a loss of power for connected equipment.

Monitoring and Management

You get remote power management of the UPS over the network, as well as centralized management via the APC InfraStruXure Manager, giving IT and facilities teams real oversight without needing to be physically present at the unit. LCD display, audible alarms, and LED status indicators enable straightforward monitoring and management at the unit itself, while a SmartSlot lets you customize the UPS’s capabilities with optional management cards as your monitoring needs evolve.

Battery Intelligence Built Into the APC SUVTP30KH4B4S

Temperature-compensated battery charging prolongs battery life by regulating charge voltage according to battery temperature, and intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging — meaningful engineering that extends the real-world service life of the battery investment well beyond what basic charging circuitry would achieve.

Cost-Conscious Engineering

Input power factor correction minimizes installation costs by enabling the use of smaller generators and cabling — a genuinely practical benefit for facilities pairing the UPS with backup generation, where every reduction in required generator capacity translates directly into lower infrastructure cost.

Certified and Professionally Commissioned

The APC SUVTP30KH4B4S carries recognized certifications including CE, ISO 14001, ISO 9001, and IEC 62040-3, and arrives with professional Start-Up 5×8 service included — ensuring the unit is properly commissioned by qualified technicians rather than left to guesswork during installation.

The Bottom Line on the APC SUVTP30KH4B4S

For data centers, large retail operations, and regional offices that need genuine three-phase, double-conversion protection at real scale, the APC SUVTP30KH4B4S delivers dual mains input, parallel redundancy, hot-swappable batteries, and intelligent temperature-compensated charging — all backed by centralized network management and professional start-up service. It’s enterprise-class continuity, sized precisely for the businesses that are ready to stop treating power protection as an afterthought.

CONTACT US @ TIACO TECHNOLOGIES.