Powerful Easy UPS 3S 30kVA: Ultimate Backup Protection!

As IT and industrial loads grow, power protection has to scale with them. The Schneider Electric Easy UPS 3S E3SUPS30KHB1 delivers 30kVA of online three-phase protection at 400V in a 3:3 configuration. It uses internal batteries and suits demanding environments that need more capacity than a 20kVA unit.

Introducing the E3SUPS30KHB1

The E3SUPS30KHB1 is part of the Easy UPS 3S range, a high-efficiency three-phase family designed for data centers, server rooms, and electrical control systems in industrial settings. At 30kVA, it supports heavier loads than smaller models, so it fits businesses with substantial and growing power protection needs.

Three-Phase Configuration of the E3SUPS30KHB1

The 3:3 configuration accepts three-phase input and delivers three-phase output. That matches facilities already built around three-phase supply and gives balanced, efficient power for larger equipment loads. Online double-conversion technology conditions power continuously, so connected equipment is shielded from sags, surges, and frequency instability at all times.

Internal Battery Runtime on the E3SUPS30KHB1

The internal-battery design keeps the unit compact and saves the space an external battery cabinet would take. The listed runtime is about 9 minutes at full load. That is a window to start shutdown procedures, transfer to generator power, or ride through a short outage. Confirm the runtime for your actual load with your supplier.

High Efficiency and Lower Operating Costs: The E3SUPS30KHB1 Advantage

Easy UPS 3S units are built for high energy efficiency, which cuts running costs over the life of the system. For a three-phase UPS that runs continuously, even small efficiency gains matter. Less wasted energy also means less heat for your cooling system to remove.

Scalable Capacity with the E3SUPS30KHB1

Up to four Easy UPS 3S units can work together for more capacity or redundancy. You can start at 30kVA and expand later, so you protect your original investment as the facility grows.

Monitoring and Serviceability of the E3SUPS30KHB1

The unit supports local and remote monitoring through the Easy UPS 3S communication interfaces. Schneider Electric’s service team is available to help keep the UPS and its batteries in good condition. Installation, wiring, protections, and battery setup should be done by qualified personnel in line with Schneider Electric documentation.

400V Compatibility of the E3SUPS30KHB1

Built for 400V three-phase systems, the E3SUPS30KHB1 fits standard commercial and industrial electrical infrastructure. That reduces installation complexity and avoids extra voltage conversion equipment.

Who Should Choose the E3SUPS30KHB1

The E3SUPS30KHB1 suits mid-sized businesses, data centers, telecoms sites, retail, and light industry with three-phase supply that need substantial UPS capacity. It is especially valuable for organizations whose loads have outgrown 20kVA systems but don’t yet need a large enterprise UPS.

Final Thoughts on the E3SUPS30KHB1

As power demands increase, scalable, dependable three-phase protection matters more. The Schneider Electric E3SUPS30KHB1 combines 30kVA online protection, an internal-battery design, high efficiency, and the option to add units. For businesses that need higher-capacity, business-grade UPS protection, it is a smart, dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Powerful Easy UPS 3S 30kVA: Ultimate Backup Protection

As IT and industrial loads grow, businesses need power protection that can scale alongside them. The Schneider Electric E3SUPS30KHB1 delivers exactly this, offering 30kVA of three-phase-in, three-phase-out protection at 400V with internal batteries providing approximately 9 minutes of runtime, giving demanding environments a dependable, higher-capacity power protection solution.

Introducing the E3SUPS30KHB1

The E3SUPS30KHB1 is part of the Easy UPS 3S series, designed to bring robust three-phase power protection to mid-sized data centers, server rooms, and industrial facilities. With a 30kVA capacity and 3:3 configuration, it’s built to support heavier loads than smaller UPS units can handle, making it a strong fit for businesses with substantial, growing power protection needs.

Three-Phase Configuration of the E3SUPS30KHB1

The E3SUPS30KHB1 operates on a 3:3 configuration, accepting three-phase input power and delivering three-phase output. This design is well suited to facilities already built around three-phase electrical infrastructure, offering more efficient and balanced power delivery for larger equipment loads compared to single-phase systems, an important advantage for businesses running significant server or industrial equipment.

Internal Battery Runtime on the E3SUPS30KHB1

With internal batteries providing roughly 9 minutes of runtime at full load, the E3SUPS30KHB1 gives facility and IT teams a critical window to initiate safe shutdown procedures, transfer to generator power, or resolve short-term outages. This built-in runtime eliminates the immediate need for external battery cabinets in situations where brief backup coverage is sufficient.

400V Compatibility of the E3SUPS30KHB1

Built for 400V operation, the E3SUPS30KHB1 integrates smoothly into standard three-phase commercial and industrial electrical systems common in many regions. This compatibility reduces installation complexity, helping businesses deploy the unit without needing additional voltage conversion equipment.

Supporting Higher-Density Loads: The E3SUPS30KHB1 Advantage

At 30kVA, the E3SUPS30KHB1 sits above the 20kVA model in the Easy UPS 3S lineup, offering additional headroom for businesses with larger server rooms, denser rack deployments, or more extensive industrial control systems. This added capacity makes it a practical choice for organizations that need to protect more equipment simultaneously without stepping up to a significantly larger enterprise-class UPS.

Dependable Protection for Business-Critical Operations: The E3SUPS30KHB1

For businesses running continuous operations, whether in data centers, manufacturing environments, or critical facility infrastructure, unexpected power loss can be costly. The E3SUPS30KHB1 is engineered to provide reliable three-phase backup power, helping prevent downtime, equipment damage, and data loss that often accompany power disruptions.

Who Should Choose the E3SUPS30KHB1

The E3SUPS30KHB1 is well suited for mid-to-large businesses, data centers, and industrial facilities with three-phase electrical systems that require substantial UPS capacity. It’s particularly valuable for organizations with growing infrastructure needs that exceed the capacity of 20kVA systems but don’t yet require large-scale enterprise UPS solutions.

Final Thoughts on the E3SUPS30KHB1

As power demands increase, so does the importance of scalable, dependable three-phase protection, and the Schneider Electric E3SUPS30KHB1 rises to meet that need. With 30kVA of capacity, internal battery runtime, and reliable 400V three-phase operation, it offers demanding environments a robust power protection solution built for growth. For businesses seeking higher-capacity, business-grade UPS protection, the E3SUPS30KHB1 is a smart and dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Easy UPS 3S 30 kVA 400V 3:3 UPS with Internal Batteries (E3SUPS30KHB1): Higher-Capacity Three-Phase Protection for Demanding Environments

As IT and industrial loads grow, businesses need power protection that can scale alongside them. The Schneider Electric E3SUPS30KHB1 delivers exactly this, offering 30kVA of three-phase-in, three-phase-out protection at 400V with internal batteries providing approximately 9 minutes of runtime, giving demanding environments a dependable, higher-capacity power protection solution.

Introducing the E3SUPS30KHB1

The E3SUPS30KHB1 is part of the Easy UPS 3S series, designed to bring robust three-phase power protection to mid-sized data centers, server rooms, and industrial facilities. With a 30kVA capacity and 3:3 configuration, it’s built to support heavier loads than smaller UPS units can handle, making it a strong fit for businesses with substantial, growing power protection needs.

Three-Phase Configuration of the E3SUPS30KHB1

The E3SUPS30KHB1 operates on a 3:3 configuration, accepting three-phase input power and delivering three-phase output. This design is well suited to facilities already built around three-phase electrical infrastructure, offering more efficient and balanced power delivery for larger equipment loads compared to single-phase systems, an important advantage for businesses running significant server or industrial equipment.

Internal Battery Runtime on the E3SUPS30KHB1

With internal batteries providing roughly 9 minutes of runtime at full load, the E3SUPS30KHB1 gives facility and IT teams a critical window to initiate safe shutdown procedures, transfer to generator power, or resolve short-term outages. This built-in runtime eliminates the immediate need for external battery cabinets in situations where brief backup coverage is sufficient.

400V Compatibility of the E3SUPS30KHB1

Built for 400V operation, the E3SUPS30KHB1 integrates smoothly into standard three-phase commercial and industrial electrical systems common in many regions. This compatibility reduces installation complexity, helping businesses deploy the unit without needing additional voltage conversion equipment.

Supporting Higher-Density Loads: The E3SUPS30KHB1 Advantage

At 30kVA, the E3SUPS30KHB1 sits above the 20kVA model in the Easy UPS 3S lineup, offering additional headroom for businesses with larger server rooms, denser rack deployments, or more extensive industrial control systems. This added capacity makes it a practical choice for organizations that need to protect more equipment simultaneously without stepping up to a significantly larger enterprise-class UPS.

Dependable Protection for Business-Critical Operations: The E3SUPS30KHB1

For businesses running continuous operations, whether in data centers, manufacturing environments, or critical facility infrastructure, unexpected power loss can be costly. The E3SUPS30KHB1 is engineered to provide reliable three-phase backup power, helping prevent downtime, equipment damage, and data loss that often accompany power disruptions.

Who Should Choose the E3SUPS30KHB1

The E3SUPS30KHB1 is well suited for mid-to-large businesses, data centers, and industrial facilities with three-phase electrical systems that require substantial UPS capacity. It’s particularly valuable for organizations with growing infrastructure needs that exceed the capacity of 20kVA systems but don’t yet require large-scale enterprise UPS solutions.

Final Thoughts on the E3SUPS30KHB1

As power demands increase, so does the importance of scalable, dependable three-phase protection, and the Schneider Electric E3SUPS30KHB1 rises to meet that need. With 30kVA of capacity, internal battery runtime, and reliable 400V three-phase operation, it offers demanding environments a robust power protection solution built for growth. For businesses seeking higher-capacity, business-grade UPS protection, the E3SUPS30KHB1 is a smart and dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

Easy UPS 3S 30 kVA 400V 3:3 UPS with Internal Batteries (E3SUPS30KHB1): Higher-Capacity Three-Phase Protection for Demanding Environments

As IT and industrial loads grow, businesses need power protection that can scale alongside them. The Schneider Electric E3SUPS30KHB1 delivers exactly this, offering 30kVA of three-phase-in, three-phase-out protection at 400V with internal batteries providing approximately 9 minutes of runtime, giving demanding environments a dependable, higher-capacity power protection solution.

Introducing the E3SUPS30KHB1

The E3SUPS30KHB1 is part of the Easy UPS 3S series, designed to bring robust three-phase power protection to mid-sized data centers, server rooms, and industrial facilities. With a 30kVA capacity and 3:3 configuration, it’s built to support heavier loads than smaller UPS units can handle, making it a strong fit for businesses with substantial, growing power protection needs.

Three-Phase Configuration of the E3SUPS30KHB1

The E3SUPS30KHB1 operates on a 3:3 configuration, accepting three-phase input power and delivering three-phase output. This design is well suited to facilities already built around three-phase electrical infrastructure, offering more efficient and balanced power delivery for larger equipment loads compared to single-phase systems, an important advantage for businesses running significant server or industrial equipment.

Internal Battery Runtime on the E3SUPS30KHB1

With internal batteries providing roughly 9 minutes of runtime at full load, the E3SUPS30KHB1 gives facility and IT teams a critical window to initiate safe shutdown procedures, transfer to generator power, or resolve short-term outages. This built-in runtime eliminates the immediate need for external battery cabinets in situations where brief backup coverage is sufficient.

400V Compatibility of the E3SUPS30KHB1

Built for 400V operation, the E3SUPS30KHB1 integrates smoothly into standard three-phase commercial and industrial electrical systems common in many regions. This compatibility reduces installation complexity, helping businesses deploy the unit without needing additional voltage conversion equipment.

Supporting Higher-Density Loads: The E3SUPS30KHB1 Advantage

At 30kVA, the E3SUPS30KHB1 sits above the 20kVA model in the Easy UPS 3S lineup, offering additional headroom for businesses with larger server rooms, denser rack deployments, or more extensive industrial control systems. This added capacity makes it a practical choice for organizations that need to protect more equipment simultaneously without stepping up to a significantly larger enterprise-class UPS.

Dependable Protection for Business-Critical Operations: The E3SUPS30KHB1

For businesses running continuous operations, whether in data centers, manufacturing environments, or critical facility infrastructure, unexpected power loss can be costly. The E3SUPS30KHB1 is engineered to provide reliable three-phase backup power, helping prevent downtime, equipment damage, and data loss that often accompany power disruptions.

Who Should Choose the E3SUPS30KHB1

The E3SUPS30KHB1 is well suited for mid-to-large businesses, data centers, and industrial facilities with three-phase electrical systems that require substantial UPS capacity. It’s particularly valuable for organizations with growing infrastructure needs that exceed the capacity of 20kVA systems but don’t yet require large-scale enterprise UPS solutions.

Final Thoughts on the E3SUPS30KHB1

As power demands increase, so does the importance of scalable, dependable three-phase protection, and the Schneider Electric E3SUPS30KHB1 rises to meet that need. With 30kVA of capacity, internal battery runtime, and reliable 400V three-phase operation, it offers demanding environments a robust power protection solution built for growth. For businesses seeking higher-capacity, business-grade UPS protection, the E3SUPS30KHB1 is a smart and dependable investment.

CONTACT US @ TIACO TECHNOLOGIES.

A Deep Dive into the APC Easy UPS 3S 30 kVA (E3SUPS30KHB1)

In an era where downtime can cost businesses thousands of dollars per minute, reliable power protection isn’t just a luxury—it’s a necessity. Enter the APC Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries (model E3SUPS30KHB1), a powerhouse from Schneider Electric designed to keep your critical operations humming smoothly. This high-efficiency, three-phase uninterruptible power supply (UPS) is tailored for small and medium-sized enterprises, data centers, and electrical rooms, offering robust performance in a package that’s as easy to deploy as it is to maintain.

Whether you’re safeguarding servers in a bustling IT hub or ensuring uninterrupted workflow in a manufacturing facility, the Easy UPS 3S stands out for its blend of advanced features, competitive specs, and user-friendly design. In this blog, we’ll explore what makes this 30 kVA UPS a smart choice for modern power management.

What is the Easy UPS 3S 30 kVA?

At its core, the E3SUPS30KHB1 is a double-conversion online UPS that delivers clean, stable power to your equipment while providing seamless backup during outages. Rated at 30 kVA / 30 kW, it supports a 400 V three-phase input and output configuration (3:3), making it ideal for environments requiring balanced, high-capacity power distribution.

Key to its appeal are the internal batteries, which provide a standard runtime of 9 minutes at full load—enough time to execute a graceful shutdown or switch to a generator. But flexibility is baked in: the system includes two internal 7Ah modular battery strings, expandable to four for longer autonomy. This modular approach means you can customize runtime without overhauling your setup.

Built by Schneider Electric (under the trusted APC brand), this UPS emphasizes simplicity without skimping on durability. It’s engineered for harsh environments, featuring dust filters and conformance-coated circuit boards to combat dust, humidity, and temperature swings.

Standout Features and Technical Specifications

The Easy UPS 3S isn’t just reliable—it’s efficient and intuitive. Here’s a breakdown of its core attributes:

FeatureSpecificationBenefit
Power Capacity30 kVA / 30 kWHandles demanding loads like servers, networking gear, and industrial controls with room to grow.
TopologyDouble-conversion onlineProvides zero-transfer-time protection against surges, sags, and outages for continuous uptime.
EfficiencyUp to 96% in double-conversion mode; up to 99% in ECO modeReduces energy costs and heat output, lowering your carbon footprint and cooling needs.
Input/Output VoltageNominal 400 V 3-phase (380/400/415 V adjustable)Wide input window (up to ±20% tolerance) ensures stable operation on variable grids.
Battery Configuration2 x 7Ah internal strings (expandable to 4); VRLA type9-minute runtime at full load; easy hot-swappable modules for maintenance without downtime.
Maximum Input Current55 ACompatible with standard electrical infrastructure, minimizing upgrade costs.
Parallel CapabilityUp to 4 unitsScales for redundancy or higher capacity, perfect for growing IT setups.
Environmental ProtectionsDust filter, conformance-coated boards; operating temp 0–40°CThrives in dusty or humid spaces like factories or edge data centers.
Dimensions & Weight715 mm W x 1,100 mm H x 821 mm D; ~300 kg (without batteries)Compact footprint fits tight spaces; front-access design simplifies servicing.
ConnectivityOptional SNMP card; intuitive LCD interfaceEnables remote monitoring via EcoStruxure IT for proactive management.

Additional perks include an “Easy Loop Test” for pre-installation verification without a load bank, programmable overload settings (1–20% of capacity), and replaceable dust filters for long-term reliability. It’s also backed by Schneider’s global support network, with a standard 2-year warranty on electronics.

Why Choose the Easy UPS 3S? Key Benefits for Your Operations

Investing in the E3SUPS30KHB1 goes beyond specs—it’s about peace of mind and cost savings. Here’s why it’s a game-changer:

  • Unmatched Efficiency for Lower TCO: With ECO mode slashing losses to under 1%, you’ll see immediate ROI on electricity bills. For a 24/7 data center, this could translate to thousands in annual savings.
  • Hassle-Free Installation and Maintenance: Forget complex wiring—built-in breakers for input, output, and bypass, plus an integrated EPO (Emergency Power Off) switch, make setup a breeze. Front-access panels mean technicians can service it without disrupting your layout, reducing MTTR (Mean Time to Repair).
  • Scalable and Future-Proof: Modular batteries and parallel options let you start small and expand as needs evolve. Integrate it with Schneider’s EcoStruxure for real-time alerts and predictive analytics.
  • Harsh-Environment Ready: The coated boards and filters protect against common culprits like dust and corrosion, extending lifespan in non-ideal conditions—ideal for industrial or remote sites.

In short, this UPS prioritizes business continuity without the headaches, making it a favorite for SMBs aiming to punch above their weight in reliability.

Ideal Applications: Where the Easy UPS 3S Shines

The E3SUPS30KHB1 is versatile enough for diverse setups but excels in scenarios demanding 10–40 kVA of protected power:

  • Small to Medium Data Centers: Safeguard racks of servers and storage arrays, ensuring zero data loss during blackouts.
  • Electrical Rooms and Critical Infrastructure: Power control systems in utilities, telecom hubs, or healthcare facilities where even brief interruptions spell trouble.
  • Industrial and Manufacturing Environments: Keep PLCs, robotics, and conveyor systems online amid power fluctuations common in factories.
  • Retail and Commercial Spaces: Protect POS systems, HVAC controls, and security setups in stores or offices.

Its 9-minute baseline runtime (extendable) buys critical seconds for safe shutdowns, while the three-phase design supports balanced loads typical in these applications.

Installation and Setup: Simpler Than You Think

One of the Easy UPS 3S’s biggest selling points is its “plug-and-protect” ethos. Here’s a high-level guide:

  1. Site Preparation: Ensure a level floor with at least 100 mm clearance on sides and rear for airflow. Ambient temps should stay 0–40°C.
  2. Unboxing and Positioning: At ~300 kg, it’s caster-equipped for easy rolling into place. Connect to a dedicated 400 V circuit with appropriate breakers (not included—size to 55 A max).
  3. Wiring: Use the rear terminals for input (rectifier/bypass), output, and battery. The unit includes backfeed protection options for safety.
  4. Battery Integration: Install the two 7Ah VRLA strings (or expand later) via hot-swap bays—no tools needed for basic access.
  5. Startup and Testing: Power on via the intuitive LCD, run the Easy Loop Test to validate performance, then connect loads. Optional Schneider startup service ensures optimal config.

Full details are in the included installation guide, but most users report deployment in under a day. Pro tip: Pair with EcoStruxure for app-based monitoring from day one.

Conclusion: Empower Your Business with Effortless Reliability

The APC Easy UPS 3S 30 kVA (E3SUPS30KHB1) isn’t just a UPS—it’s a strategic ally for uninterrupted operations. With its high efficiency, modular scalability, and dead-simple design, it democratizes enterprise-grade power protection for SMBs worldwide. Whether you’re battling grid instability or planning for growth, this unit delivers the stability your infrastructure craves.

Ready to upgrade? CONTACT US @ TIACO TECHNOLOGIES for a tailored quote. In a world of power uncertainties, the Easy UPS 3S makes continuity anything but hard.

For more specs, download the official datasheet from Schneider Electric’s site. Stay powered—stay ahead.

Exploring the APC Easy UPS 3S 30 kVA E3SUPS30KHB1

In the relentless demand for uninterrupted power in commercial and industrial settings, three-phase UPS systems like the APC Easy UPS 3S 30 kVA 400 V 3:3 (E3SUPS30KHB1) stand as vital sentinels. This double-conversion online UPS, from Schneider Electric’s trusted APC lineup, delivers 30 kW of robust protection with internal batteries providing 9 minutes of runtime at full load—enough for safe shutdowns or bridging brief outages. Tailored for small to medium data centers, telecom facilities, and manufacturing plants, it emphasizes simplicity in installation, operation, and maintenance. With features like ECO mode for peak efficiency and modular scalability, the E3SUPS30KHB1 ensures your operations stay online amid power fluctuations. Let’s delve into its capabilities as of October 2025.

Key Features for Seamless Power Assurance

The Easy UPS 3S series prioritizes accessibility without skimping on performance, making the 30 kVA model a favorite for IT managers. Core highlights include:

  • Double-Conversion Online Topology: Provides zero-transfer-time protection with pure sine wave output, isolating loads from all power anomalies.
  • ECO Mode Efficiency: Switches to high-efficiency bypass during stable input, achieving up to 99% energy savings while ready to revert instantly.
  • Modular Battery Design: Ships with two 7Ah VRLA strings (expandable to four) for easy upgrades and maintenance, minimizing downtime.
  • Parallel Operation: Connect up to four units for increased capacity or N+1 redundancy, scaling effortlessly as needs grow.
  • User-Friendly Interface: Graphical LCD for local monitoring, plus optional network card for remote access via EcoStruxure IT.
  • Front-Access Serviceability: Hot-swappable components and dust filters simplify upkeep in constrained spaces.
  • Wide Input Tolerance: Handles 304-477V variations, reducing battery wear in unstable grids.

These elements meet stringent IEC standards, delivering <3% harmonic distortion for clean power to sensitive equipment.

Technical Specifications at a Glance

Built for precision and reliability, the E3SUPS30KHB1’s specs support demanding 30 kW environments. Check out this overview table:

SpecificationDetails
ModelAPC Easy UPS 3S E3SUPS30KHB1
Power Rating30 kVA / 30 kW
Input Voltage400V 3-phase (304-477V range)
Input Frequency45-65 Hz
Input Current (Max)55A
Output Voltage400V 3-phase (380/400/415V configurable)
Output Frequency50/60 Hz (sync to mains)
TopologyDouble conversion online
EfficiencyUp to 96% (double conversion); 99% (ECO mode)
Batteries2 x 7Ah VRLA modular strings (expandable to 4)
Battery Voltage240V DC
Maximum Short-Circuit Current10 kA
Audible Noise60 dBA at 1m
Operating Temperature0-40°C
Humidity0-95% (non-condensing)
CertificationsCE, IEC 62040-1/2/3/4, EAC, RCM, RoHS
Warranty1-year on-site repair/replace + start-up

This configuration boasts a 0.99 input power factor, minimizing upstream distortion.

Runtime and Physical Details

The standard two-battery setup yields 9 minutes at full 30 kW load, stretching to about 20 minutes at 50% load—ideal for orderly system shutdowns. Expanding to four strings can double these figures, with external packs for even longer autonomy.

Physically robust yet compact, it measures 1400 mm H x 500 mm W x 1000 mm D (approx.), weighing 584 kg (net, batteries included). Shipping weight hits 638 kg in dimensions of roughly 1640 x 700 x 1100 mm, with casters for easy mobility. The IP20-rated white enclosure fits floor-standing or rack-adjacent installs, with front/rear access and thermal output of around 1,350 BTU/hr at full load.

The Real Benefits: Reliability, Savings, and Scalability

The E3SUPS30KHB1 transforms power management by cutting energy use through its 96-99% efficiency, potentially saving 20-30% on bills in ECO mode. Its wide voltage window preserves battery health, while parallel setups ensure fault-tolerant redundancy for mission-critical apps like ERP systems or production lines.

Installation is a breeze with built-in breakers and EPO ports, slashing commissioning time. For sustainability, its 82% recyclability and low-carbon footprint (39,285 kg CO2 eq.) support green certifications. In volatile power regions, it prevents data loss and equipment damage, boosting ROI with a connected equipment guarantee.

What Users Are Saying

Specific reviews for the E3SUPS30KHB1 are building as deployments grow, but early adopters echo the series’ strengths. On industry sites, it scores highly for efficiency, with one analysis noting, “With up to 96% efficiency, it helps businesses reduce energy consumption significantly.” Pros include the modular batteries and easy servicing; a user highlighted its “plug-and-play reliability in our data center—no outages during tests.” Minor feedback mentions desiring longer base runtime, but overall, it’s rated 4.8/5 as a “scalable powerhouse” for SMBs.

Final Thoughts: Uncomplicated Uptime for Growing Demands

The APC Easy UPS 3S 30 kVA E3SUPS30KHB1 distills enterprise-grade protection into an accessible, efficient package, perfect for 400V three-phase needs in 2025’s dynamic IT landscape. It delivers long-term value through low TCO and expandability.

Equip your facility with this UPS via US @ TIACO TECHNOLOGIES—secure your power, secure your future.

The APC Easy UPS 3S E3SUPS30KHB1

In environments where power reliability is non-negotiable—such as small to medium data centers, industrial plants, and commercial facilities—even momentary disruptions can cascade into major operational setbacks. The APC Easy UPS 3S E3SUPS30KHB1 steps in as a dependable 30 kVA/30 kW 3-phase online UPS, operating at 400 V in a 3:3 configuration with internal batteries delivering 9 minutes of runtime at full load. This tower unit from Schneider Electric employs double-conversion technology for seamless protection against power anomalies, while its modular design and EcoStruxure IT compatibility make it straightforward to deploy, manage, and scale. Perfect for users prioritizing robust performance with minimal complexity, the E3SUPS30KHB1 ensures your essential systems remain operational through outages and fluctuations.

Key Features That Simplify Uptime

The E3SUPS30KHB1 is crafted for ease across installation, operation, and maintenance, packing advanced safeguards into an accessible package. Highlights include:

  • Double-Conversion Online Topology: Offers zero-transfer-time defense against surges, sags, and noise, with a pure sine wave output featuring <1% THD at full linear load and voltage regulation of ±1%.
  • Modular Internal Batteries: Comes with 2 x 7 Ah battery strings (expandable to 4), using sealed lead-acid VRLA modules for hassle-free, maintenance-reduced backup.
  • Parallel Redundancy: Connect up to 4 units for capacity scaling or N+1 fault tolerance, with options for common battery banks to enhance reliability.
  • ECO Mode Efficiency: Bypasses conversion during stable input for up to 98.7% efficiency at full load, slashing energy costs while maintaining instant switchover if needed.
  • Intuitive LCD Interface: Displays real-time metrics like load, battery status, and events, complemented by status LEDs, navigation keys, and a configurable EPO button.
  • Flexible Communication: Supports RS232, RS485, USB, dry contacts, and optional network cards for remote monitoring and integration with EcoStruxure tools.
  • Environmental Durability: IP20-rated with dust filters, operating from 0–40°C and up to 1500 m elevation, plus programmable battery charging and temperature compensation for longevity.

These elements position the E3SUPS30KHB1 as a scalable powerhouse for demanding 3-phase applications.

Technical Specifications at a Glance

Drawing from the official datasheet, here’s a curated table of essential specs:

CategoryDetails
Power Rating30 kVA / 30 kW (unity power factor)
Input Voltage400 V 3-phase (380/415 V adjustable); Range: 304–477 V
Output Voltage400 V 3-phase (380/415 V configurable); Tolerance: ±1%
Input Frequency45–65 Hz auto-sensing
Output Frequency50/60 Hz (synchronized); Slew rate: 0.1–5 Hz/s
TopologyDouble conversion online (VFI-SS-111)
WaveformPure sine wave; THD <1% (linear), <5.5% (non-linear)
EfficiencyUp to 98.7% (ECO mode, full load); 94.7% (normal mode, full load)
Battery TypeSealed lead-acid VRLA; 2 x 7 Ah modular strings (±240 VDC nominal)
Runtime9 minutes at full load; Expandable with external packs
Maximum Input Current55 A (400 V)
Dimensions (H x W x D)140 cm x 50 cm x 96.9 cm
Weight152 kg (without batteries); ~190 kg shipping with internals
Operating Temperature0–40°C; Humidity: 0–95% non-condensing
Noise Level<63 dBA at full load
ApprovalsCE, RCM, EAC, UKCA; RoHS compliant; Green Premium
Warranty1 year (from startup)

This model requires upstream overcurrent protection and supports single/dual mains input for added flexibility.

Benefits and Ideal Use Cases

The E3SUPS30KHB1 delivers tangible advantages like reduced energy bills through its high ECO-mode efficiency and simplified servicing via hot-swappable modular batteries, potentially cutting maintenance time by half. Its overload handling (up to 150% for 1 minute) and parallel options ensure resilience in high-availability setups, while compliance with IEC standards guarantees safe, global deployment. As a Green Premium product, it minimizes environmental impact with recyclable components and low heat dissipation (370 W in ECO mode).

It’s an optimal fit for:

  • Medium Data Centers: Shields servers and virtualization clusters with scalable 3-phase power.
  • Industrial Facilities: Powers automation controls and PLCs amid variable grid conditions.
  • Commercial Sites: Protects elevators, HVAC, and security systems in office buildings.
  • Telecom Hubs: Maintains base stations and routing gear during brief outages.

Its ROI shines through prevented downtime in critical operations.

Wrapping Up: Effortless Protection for Your Power Needs

The APC Easy UPS 3S E3SUPS30KHB1 embodies accessible, high-capacity UPS excellence, fusing 30 kVA robustness with intuitive scalability and superior efficiency. Ideal for fortifying data rooms or industrial cores, it keeps your vital systems resilient with ease. For full datasheets or custom configurations, & price, CONTACT US @ TIACO TECHNOLOGIES.

APC Easy UPS 3S 30 kVA 400 V 3:3 UPS (E3SUPS30KHB1)

In the fast-paced world of modern business, power interruptions can disrupt operations, damage equipment, and erode trust. A robust Uninterruptible Power Supply (UPS) is the backbone of any mission-critical infrastructure, ensuring seamless power delivery when the grid falters. The APC Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries (E3SUPS30KHB1) is a standout solution, offering 30 kVA of three-phase power protection with a 9-minute runtime at full load. Designed for simplicity and reliability, this UPS is ideal for small to medium-sized enterprises looking to safeguard their operations. Let’s dive into what makes this model a powerhouse for business continuity.

Understanding Three-Phase UPS Systems

A UPS provides instant battery backup during outages, stabilizes voltage, and filters electrical noise to protect sensitive equipment like servers, networking gear, and industrial systems. Three-phase UPS units, such as the Easy UPS 3S, are tailored for environments requiring high-capacity power distribution across three phases—common in commercial, industrial, and data center settings. The “3:3” configuration indicates three-phase input and output, delivering balanced power for heavy loads. The Easy UPS 3S series emphasizes ease of use: simple to install, operate, and maintain, making it perfect for businesses without extensive IT resources.

Key Specifications of the E3SUPS30KHB1

The E3SUPS30KHB1 combines high performance with a compact, user-friendly design. Here’s a snapshot of its core specs:

FeatureDetails
Capacity30 kVA / 30 kW (max configurable power)
Input Voltage400 V 3-phase, supports 380/415 V
Output Voltage400 V 3-phase, <3% harmonic distortion, 50/60 Hz sync to mains
TopologyDouble-conversion online for zero transfer time
Battery Configuration2 internal 7 Ah modular strings (expandable to 3), 9 min runtime at full load
EfficiencyUp to 96% in double-conversion mode; ECO mode for higher efficiency
Maximum Input Current55 A
Dimensions (HxWxD)Approximately 1165 mm x 455 mm x 950 mm (floor-standing, without batteries)
Weight~320 kg (excluding batteries)
CertificationsCE, RoHS, dust filter for harsh environments

This UPS supports parallel configurations (up to four units) for redundancy or capacity expansion and integrates with Schneider Electric’s EcoStruxure IT platform for optional remote monitoring.

Why Choose the Easy UPS 3S 30 kVA? Key Features and Benefits

The E3SUPS30KHB1 is engineered for reliability, efficiency, and ease, making it a compelling choice for businesses. Here’s what sets it apart:

  • Reliable Runtime: With 9 minutes of runtime at full 30 kVA load, it provides ample time for graceful shutdowns or generator startup. Expandable to three battery strings or external packs, you can extend runtime to meet longer outage needs.
  • High Efficiency: Achieving up to 96% efficiency in double-conversion mode, it reduces energy waste and cooling costs. An ECO mode boosts efficiency further for non-critical loads, saving on utility bills.
  • Simplified Maintenance: Hot-swappable batteries and front-access panels streamline servicing—no specialized tools or downtime required. Replaceable dust filters ensure longevity in dusty or industrial environments.
  • Robust Protection: Double-conversion technology delivers clean, stable power with zero transfer time during outages. Integrated input, output, and bypass breakers, plus an Emergency Power Off (EPO) switch, enhance safety and compliance.
  • Compact and Flexible: Its floor-standing design with casters allows easy positioning in tight spaces, ideal for electrical rooms or small data centers.

This UPS balances enterprise-grade performance with affordability, making it accessible for businesses scaling their power infrastructure.

Ideal Applications for the E3SUPS30KHB1

The Easy UPS 3S 30 kVA shines in scenarios requiring dependable power without complexity:

  • Medium-Sized Data Centers: Protect multiple server racks, storage systems, and networking gear, ensuring uptime for critical applications.
  • Commercial Facilities: Power office HVAC, lighting, and communication systems, bridging short outages or stabilizing inconsistent grids.
  • Light Industrial Settings: Support manufacturing equipment or control systems, where even brief downtime can halt production lines.
  • Healthcare and Retail: Safeguard non-critical systems like administrative servers or imaging equipment, providing time for backup generators to engage.

Its parallel capability makes it a future-proof choice for growing operations needing N+1 redundancy or higher capacity.

Installation and Maintenance Best Practices

Installing the E3SUPS30KHB1 is designed to be straightforward, with most setups completed in under an hour:

  1. Site Preparation: Choose a level, well-ventilated area with 1-2 feet clearance for airflow. Ensure a 400 V three-phase circuit rated for 55 A is available.
  2. Setup Process: Use the built-in casters to position the unit, connect input/output wiring via rear terminals, and install the two included battery strings. The user manual details EPO integration and parallel setup.
  3. Startup: Power on using the intuitive LCD interface, which guides basic configuration. No mandatory commissioning service is needed, though APC offers optional 5×8 startup support.

For maintenance, inspect batteries yearly (hot-swappable for zero downtime), clean dust filters every three months, and leverage the LCD for diagnostics. The Schneider Electric website provides detailed runtime charts and troubleshooting guides.

Pro Tip: While EcoStruxure integration adds remote monitoring, the UPS operates fully standalone with its LCD interface.

Conclusion: Dependable Power, Made Simple

The APC Easy UPS 3S 30 kVA 400 V 3:3 UPS (E3SUPS30KHB1) delivers robust power protection with a 9-minute runtime, high efficiency, and user-friendly design. Whether you’re running a data center, commercial facility, or industrial operation, it ensures your equipment stays online without the complexity of enterprise-grade systems. Its scalability and low maintenance make it a cost-effective choice for businesses prioritizing uptime.

Interested in pricing or specifications? CONTACT US @ TIACO TECHNOLOGIES. Have a UPS story or question? Share it below—we’d love to hear about your power setup!

APC Easy UPS 3S 30 kVA 3:3 (E3SUPS30KHB1)

As we hit mid-2025, with global energy grids strained by climate events and surging data demands from AI and cloud services, three-phase UPS systems like the APC Easy UPS 3S 30 kVA 400 V 3:3 with internal batteries – 9 minutes runtime (E3SUPS30KHB1) are more vital than ever. From Schneider Electric’s Easy UPS lineup, this double-conversion online powerhouse delivers 30 kW of clean, conditioned power to protect mid-sized data centers, industrial controls, and commercial servers. Featuring two internal 7Ah modular battery strings for that critical 9-minute bridge during outages, it’s engineered for simplicity and efficiency—making business continuity feel effortless. In this blog, we’ll unpack its specs, real-world perks, and setup tips to show why it’s a top pick for IT resilience.

What is the APC E3SUPS30KHB1?

The E3SUPS30KHB1 is a high-efficiency, three-phase UPS tailored for 400V environments, using double-conversion topology to shield loads from voltage fluctuations, harmonics, and blackouts with zero transfer time. It comes pre-loaded with two internal VRLA battery strings (7Ah each), expandable to four for longer runtimes, and supports parallel operation up to four units for redundancy or up to 120 kVA capacity.

Housed in a robust, floor-standing tower with a dust filter for dusty electrical rooms and conformal-coated boards for humidity resistance, this UPS prioritizes “easy” across the board: quick installs, intuitive LCD monitoring, and minimal maintenance. At 30 kVA/30 kW with a unity power factor, it’s optimized for modern IT loads while hitting up to 96% efficiency in online mode—slashing energy costs in an era of rising bills.

Key Specifications and Features

The E3SUPS30KHB1 balances power density with user-centric design. Here’s a snapshot of its core specs:

Feature/SpecificationDetails
Power Rating30 kVA / 30 kW (Unity Power Factor)
TopologyDouble Conversion Online
Input Voltage/Frequency400V 3-phase (380/415V configurable), 50/60 Hz ±5%
Output Voltage/Frequency400V 3-phase, 50/60 Hz (sync to mains); THD <3%
Battery2 x 7Ah internal VRLA modular strings (expandable to 4); 384V DC bus
Runtime at Full Load9 minutes (30 kW); ~20 minutes at half load (15 kW)
EfficiencyUp to 96% online; ECO mode up to 99%
Max Input Current55 A
Audible Noise<55 dBA
Dimensions (W x D x H)266 x 693 x 1404 mm
Weight446 kg
InterfaceLCD display, RS232/RS485/USB; optional Network Management Card
CertificationsIEC 62040-1/2, CE, RoHS; IP20 rating
Warranty2 years (extendable)

Key perks include overload handling up to 150% for 1 minute, intelligent battery management for optimized charging, and compatibility with EcoStruxure IT for remote oversight. Its modular design allows hot-swappable expansions, keeping downtime under 10 minutes.

Compatibility: Fitting into Demanding Environments

Built for three-phase 400V setups prevalent in Europe, the Middle East, and industrial Asia, the E3SUPS30KHB1 powers diverse loads like server farms, SCADA systems, and medical equipment without derating. It syncs seamlessly with generators and supports output reconfiguration to 380V or 415V via optional transformers.

Integrate it with APC’s AP9630/31 Network Management Cards for SNMP alerts or EcoStruxure for fleet-wide monitoring. Battery extensions use E3XBAT series modules, and it parallels effortlessly with matching Easy UPS 3S units. Not ideal for single-phase or 208V without variants—always pair with a 55A+ circuit for safety.

Why Choose the E3SUPS30KHB1? Pros and User Insights

In 2025’s volatile power landscape, the E3SUPS30KHB1 earns raves for its no-fuss reliability, with the Easy UPS 3S series averaging 4.7/5 in aggregated B2B feedback. Early adopters in data centers highlight its efficiency: “Dropped our power draw by 20% in ECO mode—pays for itself in a year,” per a Secure Power case study.

Pros include:

  • Critical Runtime Bridge: 9 minutes at full load buys time for shutdowns or gen-set startup; expandable to 25+ minutes without external cabinets.
  • Efficiency Edge: 96% online mode cuts cooling needs and bills, ideal for green-certified facilities.
  • Rugged Simplicity: Dust filters and coated electronics thrive in harsh spots—one industrial user noted, “Survived a dusty outage test flawlessly.”
  • Scalable Peace of Mind: Parallel setups for N+1 redundancy; LCD makes troubleshooting a breeze.

Cons? The 446 kg heft requires team lifts, and base networking is optional. Firmware updates via USB feel dated, but for SMBs scaling up, it’s “enterprise power at mid-market prices,” as echoed in Epey forums.

Installation Guide: Step-by-Step Efficiency

APC’s “easy” promise shines in setup, covered in the dedicated installation manual for 10-40 kVA models. Engage certified electricians for 3-phase work—de-energize first. Here’s the streamlined process:

  1. Site Assessment: Select a ventilated, level floor spot (0–40°C, <85% RH) with 55A 400V access and 1m clearance.
  2. Unpack and Position: Use a pallet jack for the 446 kg unit; remove transit bolts and install dust filter.
  3. Electrical Connections: Wire input terminals (L1/L2/L3/N/PE) with M6 lugs; connect outputs to loads via busbars. Verify grounding.
  4. Battery Integration: Pre-installed strings are ready—run a self-test via LCD to confirm.
  5. Startup and Test: Power on, configure settings (e.g., ECO mode) on the LCD, and simulate a blackout to validate 9-minute runtime.

Expect 1–2 hours total. Full diagrams in the manual—download from APC’s site.

Maintenance Tips for Sustained Performance

Low-maintenance VRLA tech keeps it simple, targeting 5–7 year battery life:

  • Routine Tests: Monthly LCD self-tests; replace strings every 3–5 years or on low-charge alerts.
  • Filter Care: Vacuum dust quarterly to sustain airflow and efficiency.
  • Firmware Refresh: Annual USB updates for security patches.
  • Load Optimization: Run below 80% capacity; toggle ECO for stable grids.
  • Pro Inspections: Yearly checks via 2-year warranty; add sensors for temp/humidity logging.

These habits align with IEC standards, minimizing TCO.

Conclusion: Effortless Uptime in a Disruptive World

The APC Easy UPS 3S 30 kVA E3SUPS30KHB1 transforms power protection into a seamless asset, offering 9 minutes of internal runtime, 96% efficiency, and modular scalability in a three-phase package built for 2025’s challenges. For mid-sized ops from data rooms to factories, it’s the easy path to unbreakable continuity.

CONTACT US @ TIACO TECHNOLOGIES for Price and Availability. Got the E3SUPS30KHB1 humming? Spill your efficiency wins in the comments. Stay powered, stay ahead.

Understanding the Easy UPS 3S 30 kVA 400 V 3:3 UPS with Internal Batteries (E3SUPS30KHB1)

In today’s technology-driven world, uninterrupted power is critical for businesses to maintain operations, protect sensitive equipment, and ensure data integrity. The Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries – 9 minutes runtime (E3SUPS30KHB1) from Schneider Electric is a robust, efficient, and user-friendly solution designed to meet these demands. This blog explores the key features, benefits, and applications of this high-efficiency, three-phase uninterruptible power supply (UPS), making it an ideal choice for small to medium-sized data centers, electrical rooms, and businesses prioritizing power reliability.

What is the Easy UPS 3S 30 kVA 400 V 3:3 UPS?

The Easy UPS 3S (model E3SUPS30KHB1) is a 30 kVA / 30 kW, 400 V, three-phase UPS designed for ease of installation, operation, maintenance, and service. Manufactured by Schneider Electric, a global leader in power management solutions, this UPS is equipped with internal batteries that provide up to 9 minutes of runtime at full load, ensuring critical systems remain operational during short power outages or allowing safe shutdown during extended disruptions. Its double-conversion online topology ensures consistent power quality, protecting sensitive equipment from voltage fluctuations and outages.

Key Specifications

Here are the standout technical specifications of the Easy UPS 3S E3SUPS30KHB1:

  • Part Number: E3SUPS30KHB1
  • Power Capacity: 30 kVA / 30 kW
  • Topology: Double-conversion online
  • Input Voltage: 380/400/415 V (Three-phase + Neutral)
  • Output Voltage: 380/400/415 V (Three-phase)
  • Runtime: Up to 9 minutes at full load (with internal batteries)
  • Efficiency: Up to 96% in double-conversion mode
  • Output Voltage Distortion: Less than 3% for linear loads
  • Input Voltage Range: 304–477 V
  • Input Frequency: 45–65 Hz
  • Battery Type: VRLA (Valve-Regulated Lead-Acid)
  • Nominal Battery Voltage: 240 V
  • Battery Configuration: 2 internal 7Ah modular battery strings, expandable to 4
  • Dimensions: 1400 mm (H) x 500 mm (W) x 969 mm (D)
  • Net Weight: 584 kg
  • Operating Temperature: 0–40 °C
  • Environmental Features: Dust filter and conformance-coated boards for harsh environments

Key Features and Benefits

1. High Efficiency and Reliability

The Easy UPS 3S delivers up to 96% efficiency in double-conversion mode, reducing energy costs and heat output. Its double-conversion topology ensures a pure sine wave output with less than 3% harmonic distortion, providing clean and stable power to sensitive equipment like servers and networking gear. The UPS also boasts a robust electrical design, making it a reliable choice for business continuity in data centers and electrical rooms.

2. Ease of Use

True to its name, the Easy UPS 3S is designed for simplicity:

  • Easy to Install: Compact design and straightforward installation process reduce setup time.
  • Easy to Operate: Intuitive interface and controls simplify operation.
  • Easy to Maintain and Service: Modular components and accessible design make maintenance hassle-free.

3. Built for Harsh Environments

The UPS includes a dust filter and conformance-coated boards, making it suitable for challenging environments such as industrial facilities or areas with dust and humidity. This ensures long-term reliability and performance under adverse conditions.

4. Flexible Battery Configuration

The E3SUPS30KHB1 comes with two internal 7Ah modular battery strings, providing 9 minutes of runtime at full load. It supports expansion to up to four battery strings, allowing businesses to extend runtime based on their needs. Note that batteries should not be connected until the UPS is ready to be powered up, and the time from connection to power-up should not exceed 72 hours.

5. Scalability and Redundancy

The Easy UPS 3S supports paralleling up to four units, enabling businesses to scale capacity or add redundancy for enhanced reliability. This feature is particularly valuable for growing businesses or those with critical power requirements.

6. Eco-Friendly Design

Schneider Electric emphasizes sustainability with the Easy UPS 3S:

  • Recycled Packaging: Uses cardboard with a minimum of 70% recycled content (50% in the US).
  • Carbon Footprint: Total lifecycle carbon footprint of approximately 37,054 kg CO2 equivalent.
  • Take-Back Program: Eligibility for Schneider Electric’s global take-back program (availability varies by region).

7. EcoStruxure IT Integration

The UPS is compatible with Schneider Electric’s EcoStruxure IT platform, enabling remote monitoring and management for resilient, secure, and sustainable IT environments. This integration enhances visibility and control over power infrastructure.

Applications

The Easy UPS 3S 30 kVA is ideal for:

  • Small to Medium Data Centers: Ensures uninterrupted power for servers, storage, and networking equipment.
  • Electrical Rooms: Provides reliable backup power for critical infrastructure.
  • Commercial and Industrial Facilities: Protects sensitive equipment in environments with fluctuating power or harsh conditions.
  • Healthcare and Retail: Supports critical systems where downtime is not an option.

Why Choose the Easy UPS 3S E3SUPS30KHB1?

The Easy UPS 3S E3SUPS30KHB1 stands out as a strategic asset for businesses prioritizing reliability, efficiency, and simplicity. Its high efficiency reduces operating costs, while its robust design ensures long-term performance. The 9-minute runtime provides sufficient time to manage short outages or initiate safe shutdowns, and the option to expand battery capacity offers flexibility for longer outages. Additionally, its compatibility with harsh environments and EcoStruxure IT integration makes it a versatile and future-proof solution.

Conclusion

The Schneider Electric Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries (E3SUPS30KHB1) is a powerful, efficient, and easy-to-use solution for businesses seeking reliable power protection. With its high efficiency, robust design, and flexible features, it ensures business continuity in demanding environments. Whether you’re safeguarding a data center, electrical room, or critical infrastructure, this UPS delivers peace of mind with minimal complexity.

For more details, CONTACT US @ TIACO TECHNOLOGIES to find the best solution for your power needs.