Category: News

May 19, 2025

Safeguarding Your Infrastructure: A Deep Dive into the APC Easy UPS On-Line SRV 10kVA (SRV10KIL)

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , ,

In an era where power reliability is critical for business continuity, the APC Easy UPS On-Line SRV Ext. Runtime 10000VA 230V with External Battery Pack (SRV10KIL) stands out as a robust solution for protecting sensitive IT equipment and critical infrastructure. Designed by APC by Schneider Electric, this high-performance, double-conversion online UPS delivers clean, stable power even in the most unstable electrical environments. This blog explores the features, benefits, and applications of the SRV10KIL, highlighting why it’s a top choice for small to medium data centers, server rooms, and mission-critical applications.

What is the APC Easy UPS On-Line SRV10KIL?

The SRV10KIL is a 10 kVA / 10 kW, 230V, single-phase uninterruptible power supply (UPS) with an external battery pack for extended runtime. It employs double-conversion online topology, ensuring continuous power delivery and protection against power anomalies like surges, sags, and outages. The external battery pack enhances its runtime capabilities, making it ideal for environments requiring prolonged backup power. With its robust design and advanced features, the SRV10KIL is tailored for businesses needing reliable power protection in harsh or unstable power conditions.

Key Specifications

  • Part Number: SRV10KIL
  • Power Capacity: 10 kVA / 10 kW
  • Topology: Double-conversion online
  • Nominal Input Voltage: 230V
  • Input Voltage Range: 176–300V at full load; 110–300V at 60% load
  • Nominal Output Voltage: 230V (configurable to 220V, 240V)
  • Output Connections: Hardwire 3-wire (1P+N+E), 10 x IEC C13, 2 x IEC C19
  • Efficiency: Up to 94% in online mode, 91% in battery mode
  • Input Power Factor: 0.99
  • Surge Energy Rating: 600 J
  • Battery Type: Maintenance-free sealed lead-acid (external battery pack)
  • Typical Recharge Time: 5 hours
  • Runtime: Up to 7 hours with external battery pack (depending on load)
  • Dimensions: 438 mm (H) x 190 mm (W) x 615 mm (D, UPS only)
  • Net Weight: 76.5 kg (UPS + external battery pack)
  • Communication Interfaces: RS232, USB, SmartSlot, dry contact, optional network card
  • Control Panel: LCD graphics display
  • Additional Features: ECO mode, automatic internal bypass, emergency power off (EPO)

Note: Runtime varies based on load and battery configuration. The claim of “up to 7 hours” with an external battery pack is based on specific conditions and may differ in practice.

Features of the APC Easy UPS On-Line SRV10KIL

The SRV10KIL is packed with features that ensure reliability, efficiency, and ease of use. Here are its standout characteristics:

1. Double-Conversion Online Topology

The SRV10KIL uses double-conversion technology, continuously converting incoming AC to DC and back to AC to deliver clean, stable power with minimal distortion. This protects sensitive electronics from power anomalies, making it ideal for critical applications.

2. Extended Runtime with External Battery Pack

The included external battery pack significantly extends runtime, offering up to 7 hours at reduced loads, depending on configuration. This ensures critical systems remain operational during prolonged outages, providing ample time for backup generators or safe shutdowns.

3. High Efficiency

With up to 94% efficiency in online mode and 91% in battery mode, the SRV10KIL reduces energy consumption, lowering operating costs and heat output. Its ECO mode further boosts efficiency by bypassing the double-conversion process during stable power conditions.

4. Wide Input Voltage Range

The UPS operates effectively across a wide input voltage range (176–300V at full load, 110–300V at 60% load), reducing battery usage in unstable power environments and extending battery life.

5. Versatile Output Connections

The SRV10KIL features 10 x IEC C13 outlets, 2 x IEC C19 outlets, and a hardwire 3-wire (1P+N+E) option, providing flexibility to power a variety of devices, from servers to networking equipment.

6. Intuitive LCD Interface

The LCD graphics display provides real-time status updates on input/output voltage, load, battery health, and more, simplifying monitoring and management.

7. Advanced Management Features

The UPS supports RS232, USB, SmartSlot, and dry contact interfaces, with an optional network card for remote monitoring. Features like intelligent battery management optimize battery performance and lifespan, while input power factor correction (0.99) ensures efficient power usage.

8. Robust Protection Features

The SRV10KIL includes surge protection (600 J), overload protection, and automatic internal bypass to supply utility power during overloads or faults. It also features emergency power off (EPO) and alarms for low battery and overload conditions.

9. Automatic Restart and ECO Mode

The UPS supports automatic restart of loads after shutdown and ECO mode for energy savings, enhancing operational efficiency and convenience.

Benefits of the APC Easy UPS On-Line SRV10KIL

The SRV10KIL offers numerous advantages for businesses seeking reliable power protection:

  • Uninterrupted Operations: The double-conversion topology and extended runtime ensure critical systems remain online during power disruptions, minimizing downtime and data loss.
  • Cost Savings: High efficiency (up to 94%) and ECO mode reduce energy costs, while intelligent battery management extends battery lifespan, lowering maintenance expenses.
  • Flexibility: Multiple **Versatile output connections and configurable output voltages (220V, 230V, 240V) accommodate diverse equipment needs.
  • Scalability: The external battery pack allows for extended runtime, making the UPS adaptable to varying power requirements.
  • Ease of Use: The intuitive LCD interface and communication options simplify monitoring and management, even for users with limited technical expertise.
  • Reliability: Robust protection features and a durable design ensure long-term performance in challenging environments.

Applications of the APC Easy UPS On-Line SRV10KIL

The SRV10KIL is well-suited for a range of use cases, including:

  • Small to Medium Data Centers: Its 10 kVA capacity and extended runtime make it ideal for powering servers, storage, and networking equipment.
  • Server Rooms: The UPS protects critical IT infrastructure in enterprise server rooms, ensuring uptime for business applications.
  • Healthcare: Hospitals and clinics can rely on the SRV10KIL to power sensitive medical equipment, safeguarding patient care during outages.
  • Telecom: The UPS supports telecom infrastructure, ensuring reliable communication services in unstable power environments.
  • Industrial Facilities: Its robust design and wide input voltage range make it suitable for powering control systems and automation equipment.

How Does the SRV10KIL Compare to Other UPS Models?

The SRV10KIL is part of APC’s Easy UPS On-Line SRV series, which ranges from 1 kVA to 10 kVA. Here’s how it compares:

  • SRV6KIL (6 kVA): Offers lower capacity and shorter runtime, suitable for smaller setups but less powerful than the SRV10KIL.
  • SRV10KI (10 kVA, no external battery): Lacks the external battery pack, resulting in shorter runtime compared to the SRV10KIL.
  • Other Brands: Compared to competitors, the SRV10KIL stands out for its high efficiency, extended runtime, and robust feature set, making it a cost-effective choice for demanding applications.

Installation and Setup Tips

To maximize the performance of the SRV10KIL, follow these best practices:

  1. Verify Electrical Compatibility: Ensure the input power supply matches the UPS’s 230V requirements and that wiring supports the 10 kVA load.
  2. Ensure Proper Ventilation: Place the UPS in a well-ventilated area to prevent overheating, especially during extended runtime.
  3. Professional Installation: Use qualified electricians for hardwire connections to ensure safety and compliance.
  4. Configure Communication: Set up RS232, USB, or optional network card for remote monitoring and management.
  5. Regular Maintenance: Check battery health and clean the unit periodically to maintain optimal performance.

Conclusion

The APC Easy UPS On-Line SRV Ext. Runtime 10000VA 230V with External Battery Pack (SRV10KIL) is a high-performance, reliable, and efficient solution for protecting critical infrastructure in data centers, server rooms, and other demanding environments. With its double-conversion topology, extended runtime of up to 7 hours, 94% efficiency, and robust protection features, it ensures business continuity even in the most unstable power conditions. Its user-friendly design and advanced management capabilities make it an excellent choice for businesses seeking dependable power protection without complexity.

Whether you’re powering servers, medical equipment, or telecom systems, the SRV10KIL delivers the performance and reliability needed to keep operations running smoothly. For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES.

May 19, 2025

Powering Business Continuity: Exploring the Easy UPS 3S 40 kVA 400 V 3:3 UPS (E3SUPS40KHB1)

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social ,

In today’s digital landscape, where even a brief power outage can disrupt operations and lead to significant losses, a reliable uninterruptible power supply (UPS) is essential. The Schneider Electric Easy UPS 3S 40 kVA 400 V 3:3 UPS with internal batteries – 15 minutes runtime (E3SUPS40KHB1) is a high-efficiency, three-phase UPS designed to deliver robust power protection for data centers, industrial facilities, and mission-critical applications. This blog delves into the features, benefits, and applications of the Easy UPS 3S E3SUPS40KHB1, showcasing why it’s a trusted solution for businesses prioritizing uptime and simplicity.

What is the Easy UPS 3S 40 kVA (E3SUPS40KHB1)?

The Easy UPS 3S E3SUPS40KHB1 is a 40 kVA / 40 kW, 400 V, 3:3 phase UPS from Schneider Electric, a global leader in energy management and automation. Built for reliability and ease of use, this UPS provides up to 15 minutes of runtime at full load with its internal batteries, ensuring critical systems remain operational during power disruptions. Its compact design, high efficiency, and advanced features make it an ideal choice for small to medium businesses and larger enterprises seeking cost-effective, scalable power protection.

Key Specifications

  • Part Number: E3SUPS40KHB1
  • Power Capacity: 40 kVA / 40 kW
  • Topology: Double conversion online
  • Input Voltage: 380/400/415 V (Three-phase + Neutral)
  • Output Voltage: 400 V 3-phase
  • Runtime: Up to 15 minutes at full load (internal batteries)
  • Efficiency: Up to 96% in double conversion mode; up to 99% in ECO mode
  • Input Power Factor: 0.99
  • Input Voltage Range: 304–477 V
  • Input Frequency: 45–65 Hz
  • Output Voltage Distortion: < 3% for linear load
  • Battery Type: VRLA (Valve Regulated Lead-Acid), 240 V nominal
  • Battery Configuration: 3 internal 7Ah modular battery strings, expandable to 4
  • Dimensions: 1400 mm (H) x 380 mm (W) x 928 mm (D)
  • Net Weight: 590 kg
  • Communication Interfaces: RS232, RS485, USB, dry contact, Modbus TCP/IP, optional network card
  • Control Panel: Multi-function LCD status and display console
  • Additional Features: Dust filter, conformance-coated boards, ECO mode

Features of the Easy UPS 3S E3SUPS40KHB1

The Easy UPS 3S E3SUPS40KHB1 combines advanced technology with user-friendly design to deliver reliable power protection. Here are its standout features:

1. High Efficiency

With up to 96% efficiency in double conversion mode and up to 99% in ECO mode, the E3SUPS40KHB1 minimizes energy losses, reducing operating costs and environmental impact. Its 0.99 input power factor ensures efficient power utilization, making it a sustainable choice for modern facilities.

2. 15-Minute Runtime with Internal Batteries

The UPS includes internal VRLA batteries that provide up to 15 minutes of runtime at full load, allowing critical systems to continue operating during power outages or until backup generators activate. The battery configuration (3 modular 7Ah strings, expandable to 4) offers flexibility for extended runtime needs without requiring external cabinets.

3. Double Conversion Online Topology

The double conversion online design delivers clean, stable power with < 3% output voltage distortion and precise voltage regulation. By continuously converting incoming AC to DC and back to AC, the UPS protects sensitive equipment from power surges, sags, and other disturbances, ensuring optimal performance.

4. Ease of Installation and Operation

The Easy UPS 3S is designed to be easy to install, operate, maintain, and service. Its compact 380 mm width, intuitive LCD control panel, and included dust filter simplify setup and management. Conformance-coated boards enhance durability in harsh environments, such as dusty or humid electrical rooms.

5. Advanced Communication Options

The UPS supports a range of communication interfaces, including RS232, RS485, USB, dry contact, Modbus TCP/IP, and an optional network card. These enable seamless integration with data center management systems, providing real-time monitoring and control capabilities.

6. Robust Electrical Design

With a wide input voltage range (304–477 V) and maximum input current of 73 A, the E3SUPS40KHB1 is built to handle demanding power environments. Its robust design ensures long-term reliability, supporting business continuity in critical applications.

7. ECO Mode for Energy Savings

The UPS features an ECO mode that achieves up to 99% efficiency by bypassing the double conversion process during stable power conditions, further reducing energy costs while maintaining protection.

Benefits of the Easy UPS 3S E3SUPS40KHB1

The E3SUPS40KHB1 offers several advantages for businesses seeking dependable power protection:

  • Business Continuity: The 15-minute runtime and double conversion topology ensure uninterrupted operation during power disruptions, minimizing downtime and data loss.
  • Cost Efficiency: High efficiency (up to 96% in double conversion, 99% in ECO mode) reduces energy costs, while integrated batteries lower installation expenses.
  • Simplified Management: The intuitive LCD console and advanced communication options make monitoring and maintenance straightforward, even for users with limited technical expertise.
  • Space-Saving Design: The compact footprint (380 mm width) and internal batteries optimize floor space in data centers and electrical rooms.
  • Global Compatibility: Support for 380/400/415 V input voltages ensures adaptability to diverse power environments worldwide.
  • Enhanced Durability: Dust filters and conformance-coated boards ensure reliable performance in challenging conditions, extending the UPS’s lifespan.

Applications of the Easy UPS 3S E3SUPS40KHB1

The Easy UPS 3S 40 kVA is versatile and well-suited for a variety of use cases, including:

  • Medium to Large Data Centers: Its 40 kVA capacity and 15-minute runtime make it ideal for protecting servers, storage, and networking equipment in data centers.
  • Industrial Facilities: The UPS supports heavy-duty applications in manufacturing plants and electrical rooms, ensuring reliable power for critical processes.
  • Healthcare: Hospitals and clinics can rely on the E3SUPS40KHB1 to power sensitive medical equipment, safeguarding patient care during outages.
  • Commercial Buildings: The UPS protects business-critical systems in offices, retail stores, and hospitality venues, supporting security infrastructure, point-of-sale systems, and more.
  • Edge Computing: For edge deployments requiring compact, reliable power protection, the Easy UPS 3S delivers robust performance in remote or distributed IT environments.

How Does the E3SUPS40KHB1 Compare to Other UPS Models?

The Easy UPS 3S 40 kVA is part of Schneider Electric’s Easy UPS 3S series (10–40 kVA). Here’s how it compares:

  • Easy UPS 3S 30 kVA (E3SUPS30KHB1): Offers a lower capacity (30 kVA) and 9-minute runtime. The 40 kVA model is better suited for larger loads and longer runtime needs.
  • Easy UPS 3S 20 kVA (E3SUPS20KHB1): Provides 20 kVA capacity and 15-minute runtime, suitable for smaller applications but less powerful than the 40 kVA model.
  • Other Brands: Compared to competitors, the Easy UPS 3S emphasizes ease of use, high efficiency, and integrated batteries, making it a cost-effective choice for businesses.

Installation and Setup Tips

To ensure optimal performance of the Easy UPS 3S E3SUPS40KHB1, follow these best practices:

  1. Verify Electrical Compatibility: Confirm that the input power supply matches the UPS’s 380/400/415 V, three-phase requirements and that all breakers are OFF during installation.
  2. Ensure Proper Ventilation: Place the UPS in a well-ventilated area to maintain its 96% efficiency and prolong battery life.
  3. Hire Qualified Personnel: Installation should be performed by trained electricians familiar with three-phase power systems to ensure safety and compliance.
  4. Configure Communication Interfaces: Set up RS232, RS485, or Modbus TCP/IP connections for remote monitoring, leveraging the optional network card for advanced management.
  5. Regular Maintenance: Inspect the dust filter and battery health periodically to maintain performance, especially in dusty or humid environments.

Conclusion

The Schneider Electric Easy UPS 3S 40 kVA 400 V 3:3 UPS with internal batteries (E3SUPS40KHB1) is a powerful, efficient, and user-friendly solution for protecting critical infrastructure in data centers, industrial facilities, and commercial environments. With its 15-minute runtime, up to 96% efficiency (99% in ECO mode), and robust electrical design, it ensures business continuity while minimizing operational costs. Its ease of installation, operation, and maintenance makes it an excellent choice for businesses seeking reliable power protection without complexity.

Whether you’re safeguarding servers, medical equipment, or industrial systems, the Easy UPS 3S E3SUPS40KHB1 delivers the performance and reliability needed to keep operations running smoothly. For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES.

May 19, 2025

Ensuring Power Reliability: A Deep Dive into the Easy UPS 3S 30 kVA 400 V 3:3 UPS (E3SUPS30KHB1)

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , , ,

In an era where downtime can cost businesses thousands of dollars per minute, reliable power protection is critical for maintaining operational continuity. The Schneider Electric Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries – 9 minutes runtime (E3SUPS30KHB1) is a high-efficiency, three-phase uninterruptible power supply (UPS) designed to safeguard critical infrastructure in data centers, industrial facilities, and commercial environments. This blog explores the features, benefits, and applications of the Easy UPS 3S E3SUPS30KHB1, highlighting why it’s a top choice for businesses prioritizing uptime and simplicity.

What is the Easy UPS 3S 30 kVA (E3SUPS30KHB1)?

The Easy UPS 3S E3SUPS30KHB1 is a 30 kVA / 30 kW, 400 V, 3:3 phase UPS from Schneider Electric, a global leader in power management solutions. Engineered for ease of use and robust performance, this UPS provides up to 9 minutes of runtime at full load with its internal batteries, ensuring critical systems remain operational during power outages. Its compact design, high efficiency, and advanced features make it ideal for small to medium businesses seeking cost-effective power protection.

Key Specifications

  • Part Number: E3SUPS30KHB1
  • Power Capacity: 30 kVA / 30 kW
  • Topology: Double conversion online
  • Input Voltage: 380/400/415 V (Three-phase + Neutral)
  • Output Voltage: 400 V 3-phase
  • Runtime: Up to 9 minutes at full load (internal batteries)
  • Efficiency: Up to 96% in double conversion mode
  • Output Harmonic Distortion: < 3% for linear load
  • Output Voltage Tolerance: +/- 1.5%
  • Input Power Factor: >0.99
  • Dimensions: 1400 mm (H) x 380 mm (W) x 928 mm (D)
  • Net Weight: 446 kg
  • Communication Interfaces: RS232, RS485, USB, dry contact, Modbus TCP/IP, optional network card
  • Control Panel: Multi-function LCD status and display console
  • Additional Features: Dust filter, conformance-coated boards

Features of the Easy UPS 3S E3SUPS30KHB1

The Easy UPS 3S combines simplicity with advanced technology to deliver reliable power protection. Here are its key features:

1. High Efficiency

With up to 96% efficiency in double conversion mode, the E3SUPS30KHB1 reduces energy consumption, lowering operating costs and minimizing heat output. Its high input power factor (>0.99) ensures efficient use of electrical resources, making it an environmentally conscious choice.

2. 9-Minute Runtime with Internal Batteries

The UPS includes internal batteries that provide up to 9 minutes of runtime at full load, allowing critical systems to remain operational during short power outages or until backup generators activate. This integrated battery configuration eliminates the need for external battery cabinets, saving space and simplifying deployment.

3. Double Conversion Online Topology

The double conversion online design continuously converts incoming AC power to DC and back to AC, delivering clean, stable power with < 3% output harmonic distortion and +/- 1.5% voltage tolerance. This protects sensitive equipment from power surges, sags, and other disturbances, ensuring optimal performance.

4. Ease of Use

The Easy UPS 3S is designed to be easy to install, operate, maintain, and service. Its compact footprint, intuitive multi-function LCD control panel, and comprehensive documentation streamline setup and management. Features like a dust filter and conformance-coated boards enhance durability in harsh environments.

5. Advanced Communication Capabilities

The UPS supports multiple communication interfaces, including RS232, RS485, USB, dry contact, Modbus TCP/IP, and an optional network card. These options enable seamless integration with data center management systems for real-time monitoring and control.

6. Robust Electrical Design

The E3SUPS30KHB1 features a robust electrical design that ensures long-lasting performance and business continuity. Its wide input voltage range (380/400/415 V) and network frequency (45–65 Hz) make it adaptable to diverse power environments, while its high power capacity supports heavy-duty applications.

Benefits of the Easy UPS 3S E3SUPS30KHB1

The E3SUPS30KHB1 offers numerous advantages for businesses seeking reliable power protection:

  • Uninterrupted Operations: The 9-minute runtime and double conversion topology ensure critical systems remain online during power disruptions, minimizing downtime and data loss.
  • Cost Efficiency: High efficiency (up to 96%) reduces energy costs, while the integrated battery design lowers installation and maintenance expenses.
  • Simplified Management: The user-friendly LCD console and advanced communication options make monitoring and managing the UPS straightforward, even for non-technical users.
  • Space Optimization: The compact design (380 mm width) and internal batteries save valuable floor space in data centers and electrical rooms.
  • Global Compatibility: Support for multiple input voltages (380/400/415 V) makes the UPS suitable for diverse power environments worldwide.
  • Enhanced Durability: Dust filters and conformance-coated boards ensure reliable performance in dusty or humid conditions, extending the UPS’s lifespan.

Applications of the Easy UPS 3S E3SUPS30KHB1

The Easy UPS 3S 30 kVA is versatile and well-suited for various use cases, including:

  • Small to Medium Data Centers: Its high power capacity, compact size, and 9-minute runtime make it ideal for protecting servers, storage, and networking equipment in smaller data centers.
  • Industrial Facilities: The UPS supports heavy-duty applications in manufacturing plants and electrical rooms, ensuring reliable power for critical processes.
  • Healthcare: Hospitals and clinics can rely on the E3SUPS30KHB1 to power sensitive medical equipment, safeguarding patient care during power outages.
  • Commercial Buildings: The UPS protects business-critical systems in offices, retail stores, and hospitality venues, supporting point-of-sale systems, security infrastructure, and more.
  • Edge Computing: For edge deployments requiring compact, reliable power protection, the Easy UPS 3S delivers robust performance in remote or distributed IT environments.

How Does the E3SUPS30KHB1 Compare to Other UPS Models?

The Easy UPS 3S 30 kVA is part of Schneider Electric’s Easy UPS 3S series, which ranges from 10 to 40 kVA. Here’s how it compares:

  • Easy UPS 3S 20 kVA (E3SUPS20KHB1): Offers a lower power capacity (20 kVA) and 15-minute runtime but similar features. The 30 kVA model is better for larger loads.
  • Easy UPS 3S 40 kVA (E3SUPS40KHB): Provides higher capacity (40 kVA) for more demanding applications but may require external batteries for equivalent runtime.
  • Other Brands: Compared to competitors, the Easy UPS 3S emphasizes ease of use, high efficiency, and integrated batteries, making it a cost-effective choice for small to medium businesses.

Installation and Setup Tips

To ensure optimal performance of the Easy UPS 3S E3SUPS30KHB1, follow these best practices:

  1. Verify Power Compatibility: Confirm that the input power supply matches the UPS’s 380/400/415 V, three-phase requirements and that all breakers are OFF during installation.
  2. Ensure Adequate Ventilation: Place the UPS in a well-ventilated area to maintain its 96% efficiency and prolong battery life.
  3. Hire Qualified Personnel: Installation should be performed by trained electricians familiar with three-phase power systems to ensure safety and compliance.
  4. Set Up Communication Interfaces: Configure RS232, RS485, or Modbus TCP/IP connections for remote monitoring, leveraging the optional network card for advanced management.
  5. Perform Regular Maintenance: Inspect the dust filter and battery health periodically to maintain performance, especially in challenging environments.

Conclusion

The Schneider Electric Easy UPS 3S 30 kVA 400 V 3:3 UPS with internal batteries (E3SUPS30KHB1) is a reliable, efficient, and user-friendly solution for protecting critical infrastructure in data centers, industrial facilities, and commercial environments. With its 9-minute runtime, 96% efficiency, and robust electrical design, it ensures business continuity while minimizing operational costs. Its ease of installation, operation, and maintenance makes it an excellent choice for small to medium businesses seeking simplified power protection.

Whether you’re powering servers, medical equipment, or industrial systems, the Easy UPS 3S E3SUPS30KHB1 delivers the performance and reliability needed to keep your operations running smoothly. For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES.

May 19, 2025

Power Protection Simplified: Exploring the Easy UPS 3S 20 kVA 400 V 3:3 UPS (E3SUPS20KHB1)

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , , ,

In today’s fast-paced, technology-driven world, ensuring uninterrupted power for critical IT infrastructure is non-negotiable. The Schneider Electric Easy UPS 3S 20 kVA 400 V 3:3 UPS with internal batteries – 15 minutes runtime (E3SUPS20KHB1) is a high-efficiency, three-phase uninterruptible power supply (UPS) designed to deliver reliable power protection for small to medium data centers, server rooms, and business-critical applications. This blog dives into the features, benefits, and use cases of the Easy UPS 3S E3SUPS20KHB1, highlighting why it’s an ideal choice for businesses seeking seamless power continuity.

What is the Easy UPS 3S 20 kVA (E3SUPS20KHB1)?

The Easy UPS 3S E3SUPS20KHB1 is a 20 kVA / 20 kW, 400 V, 3:3 phase UPS from Schneider Electric, a global leader in energy management and automation. Engineered for simplicity and reliability, this UPS provides 15 minutes of runtime at full load with its integrated internal batteries, ensuring critical systems remain operational during power outages. With a robust electrical design and advanced features, it’s tailored for small and medium businesses, offering easy installation, operation, maintenance, and service.

Key Specifications

  • Part Number: E3SUPS20KHB1
  • Power Capacity: 20 kVA / 20 kW
  • Topology: Double conversion online
  • Input Voltage: 380/400/415 V (Three-phase + Neutral)
  • Output Voltage: 400 V 3-phase
  • Runtime: Up to 15 minutes at full load (internal batteries)
  • Efficiency: Up to 96% in double conversion mode
  • Input Power Factor: >0.99
  • Dimensions: 1400 mm (H) x 380 mm (W) x 928 mm (D)
  • Net Weight: 446 kg
  • Communication Interfaces: RS232, RS485, USB, dry contact, Modbus TCP/IP, optional network card
  • Control Panel: Multi-function LCD status and display console

Features of the Easy UPS 3S E3SUPS20KHB1

The Easy UPS 3S is designed to simplify power protection while delivering high performance. Here are its standout features:

1. High Efficiency

With up to 96% efficiency in double conversion mode, the E3SUPS20KHB1 minimizes energy losses, reducing operating costs and heat output. Its high input power factor (>0.99) ensures optimal use of electrical resources, making it an eco-friendly choice for modern data centers.

2. 15-Minute Runtime with Internal Batteries

The UPS includes internal batteries that provide up to 15 minutes of runtime at full load, allowing systems to continue running during short power outages or until backup generators kick in. This feature eliminates the need for immediate external battery cabinets, saving space and simplifying installation.

3. Double Conversion Online Topology

The double conversion online design ensures a consistent, clean power output by continuously converting incoming AC power to DC and back to AC. This protects connected equipment from power surges, sags, and other disturbances, making it ideal for sensitive IT and industrial applications.

4. Easy Installation and Operation

The Easy UPS 3S lives up to its name with a user-friendly design. It’s easy to install, operate, maintain, and service, thanks to its compact footprint, intuitive multi-function LCD control panel, and comprehensive documentation. The UPS includes a dust filter and conformance-coated boards for enhanced durability in harsh environments.

5. Advanced Communication Options

The UPS supports multiple communication interfaces, including RS232, RS485, USB, dry contact, Modbus TCP/IP, and an optional network card. These options enable seamless integration with data center management systems, allowing real-time monitoring and control.

6. Robust Electrical Design

Built for reliability, the E3SUPS20KHB1 features a robust electrical design that ensures business continuity in data centers or electrical rooms. Its wide input voltage range (380/400/415 V) and network frequency (45–65 Hz) make it adaptable to various power environments.

Benefits of the Easy UPS 3S E3SUPS20KHB1

The E3SUPS20KHB1 offers several advantages for businesses seeking reliable power protection:

  • Business Continuity: The 15-minute runtime and double conversion topology ensure uninterrupted operation of critical systems during power disruptions, minimizing downtime and data loss.
  • Cost Savings: High efficiency (up to 96%) reduces energy costs, while the all-in-one design with internal batteries lowers installation and maintenance expenses.
  • Simplified Management: The intuitive LCD console and advanced communication options make it easy to monitor and manage the UPS, even for users with limited technical expertise.
  • Space Efficiency: The compact design (380 mm width) and integrated batteries save valuable floor space in data centers and electrical rooms.
  • Versatility: Support for multiple input voltages and a wide frequency range makes the UPS suitable for diverse global deployments.
  • Durability: Features like dust filters and conformance-coated boards enhance reliability in challenging environments, extending the UPS’s lifespan.

Applications of the Easy UPS 3S E3SUPS20KHB1

The Easy UPS 3S 20 kVA is designed for a variety of use cases, including:

  • Small to Medium Data Centers: Its compact size, high efficiency, and 15-minute runtime make it ideal for protecting servers, storage, and networking equipment in smaller data centers.
  • Commercial and Industrial Facilities: The UPS ensures reliable power for business-critical applications in offices, manufacturing plants, and electrical rooms.
  • Healthcare: Hospitals and clinics can rely on the E3SUPS20KHB1 to power sensitive medical equipment, ensuring patient safety during power outages.
  • Retail and Hospitality: The UPS supports point-of-sale systems, security infrastructure, and guest services in retail stores and hotels.
  • Edge Computing: For edge deployments requiring compact, reliable power protection, the Easy UPS 3S delivers robust performance in remote or distributed IT environments.

How Does the E3SUPS20KHB1 Compare to Other UPS Models?

The Easy UPS 3S 20 kVA stands out in Schneider Electric’s portfolio but can be compared to other models:

  • Easy UPS 3S 15 kVA (E3SUPS15KHB): Offers a lower power capacity (15 kVA) but similar features. The 20 kVA model is better suited for larger loads.
  • Easy UPS 3S 30 kVA (E3SUPS30KHB1): Provides higher capacity (30 kVA) for more demanding applications but may require external batteries for equivalent runtime.
  • Other Brands: Compared to competitors, the Easy UPS 3S emphasizes ease of use, high efficiency, and integrated batteries, making it a cost-effective choice for small to medium businesses.

Installation and Setup Tips

To maximize the performance of the Easy UPS 3S E3SUPS20KHB1, consider these best practices:

  1. Verify Electrical Compatibility: Ensure the input power supply matches the UPS’s 380/400/415 V, three-phase requirements and that all breakers are in the OFF position during installation.
  2. Ensure Proper Ventilation: Place the UPS in a well-ventilated area to prevent overheating, maintaining its 96% efficiency and extending battery life.
  3. Use Qualified Personnel: Installation should be performed by trained electricians familiar with three-phase power systems to ensure safety and compliance.
  4. Configure Communication Interfaces: Set up RS232, RS485, or Modbus TCP/IP connections for remote monitoring, leveraging the optional network card for advanced management.
  5. Regular Maintenance: Inspect the dust filter and battery health periodically to maintain optimal performance, especially in dusty or high-humidity environments.

Conclusion

The Schneider Electric Easy UPS 3S 20 kVA 400 V 3:3 UPS with internal batteries (E3SUPS20KHB1) is a powerful, efficient, and user-friendly solution for protecting critical IT and business infrastructure. With its 15-minute runtime, 96% efficiency, and robust electrical design, it ensures business continuity in data centers, commercial facilities, and edge environments. Its ease of installation, operation, and maintenance makes it an excellent choice for small to medium businesses looking to simplify power protection without compromising reliability.

Whether you’re safeguarding servers, medical equipment, or retail systems, the Easy UPS 3S E3SUPS20KHB1 delivers peace of mind with its advanced features and competitive specifications. For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES.

May 19, 2025

Understanding the APC AP9559 Rack PDU: A Reliable Power Distribution Solution

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , ,

In today’s data-driven world, efficient power management is critical for maintaining the uptime and performance of IT infrastructure. The APC AP9559 Rack PDU, Basic, 1U, 16A, 208&230V, (10)C13 & (2)C19 is a robust and cost-effective solution designed to meet the power distribution needs of server rooms, data centers, and IT environments. This blog explores the features, benefits, and applications of this rack power distribution unit (PDU), offering insights into why it’s a popular choice for businesses.

What is the APC AP9559 Rack PDU?

The APC AP9559 is a basic rack PDU manufactured by APC by Schneider Electric, a trusted name in power management solutions. This 1U (1 rack unit) horizontal-mount PDU is designed to distribute power to multiple devices within a standard 19-inch equipment rack. With a maximum input current of 16A and support for 208V and 230V input voltages, it provides reliable power distribution for IT equipment such as servers, networking devices, and storage systems.

The PDU features 10 IEC C13 outlets and 2 IEC C19 outlets, offering a versatile mix of connections to accommodate various devices. Its compact design and straightforward functionality make it an ideal choice for environments where cost-effective, no-frills power distribution is needed.

Key Specifications

  • Form Factor: 1U, horizontal rack-mountable
  • Input Current: 16A
  • Input Voltage: 208V and 230V
  • Outlets: 10 x IEC C13, 2 x IEC C19
  • Load Capacity: 3680 VA
  • Dimensions: 447 x 57 x 44 mm (L x W x H)
  • Weight: 2.36 kg
  • Part Number: AP9559
  • Included Accessories: Rack mounting brackets, user manual

Features of the APC AP9559

The APC AP9559 is designed for simplicity, reliability, and ease of use. Here are its standout features:

1. Versatile Outlet Configuration

The PDU provides 10 C13 outlets for standard IT equipment and 2 C19 outlets for high-power devices, ensuring compatibility with a wide range of hardware. This mix allows users to power multiple devices, from low-power networking gear to high-power servers, within a single rack.

2. Compact 1U Design

With its 1U form factor, the AP9559 is space-efficient, fitting seamlessly into standard 19-inch racks. Its horizontal mounting design maximizes rack space, making it suitable for both small and large IT setups. The included rack mounting brackets simplify installation.

3. High Load Capacity

The PDU supports a load capacity of 3680 VA, making it capable of handling the power demands of modern IT equipment. Its 16A input current limit ensures safe and stable power distribution, reducing the risk of overloads.

4. Reliable Power Distribution

As a basic PDU, the AP9559 focuses on delivering dependable power without the complexity of advanced features like remote monitoring. It’s built to provide consistent power distribution, ensuring the uptime of critical equipment in server racks and cabinets.

5. Universal Power Supply

The PDU supports both 208V and 230V input voltages, offering flexibility for deployment in various regions and power environments. This universal compatibility makes it a versatile choice for global IT infrastructures.

6. Low-Cost Solution

Unlike metered or switched PDUs, the AP9559 is a cost-effective option for environments that don’t require advanced monitoring or control features. It delivers essential power distribution at an affordable price point, making it ideal for small businesses or budget-conscious data centers.

Benefits of Using the APC AP9559

The APC AP9559 offers several advantages for IT managers and data center operators:

  • Ease of Installation: The PDU comes with rack mounting brackets and a user manual, allowing for quick and hassle-free setup in standard 19-inch racks. Its plug-and-play design requires no advanced configuration.
  • Scalable Power Distribution: With 12 total outlets, the AP9559 provides ample connections to support growing IT environments, reducing the need for additional PDUs in smaller setups.
  • Durability and Reliability: Built by APC, a leader in power management, the AP9559 is designed for long-term reliability, ensuring consistent performance in demanding environments.
  • Flexibility: The combination of C13 and C19 outlets, along with support for 208V and 230V, makes the PDU adaptable to a variety of equipment and power configurations.
  • Space Optimization: Its compact 1U design helps maximize rack space, leaving room for other critical equipment like servers and networking gear.

Applications of the APC AP9559

The APC AP9559 is well-suited for a range of use cases, including:

  • Small to Medium Data Centers: Its cost-effective design and reliable power distribution make it ideal for smaller data centers or server rooms with budget constraints.
  • Enterprise IT Environments: The PDU can power critical equipment in enterprise racks, supporting servers, switches, and storage devices.
  • Colocation Facilities: Its universal voltage support and versatile outlets make it a great fit for colocation environments with diverse power requirements.
  • Edge Computing: For edge deployments where space and simplicity are key, the AP9559 provides efficient power distribution in compact racks.
  • Telecom Cabinets: The PDU’s robust design and outlet configuration support telecom equipment in rack-mounted cabinets.

How Does the AP9559 Compare to Other PDUs?

While the AP9559 is a basic PDU, it’s worth comparing it to other types of PDUs to understand its place in the market:

  • Basic vs. Metered PDUs: Unlike metered PDUs, which offer real-time monitoring of power usage, the AP9559 focuses on straightforward power distribution without monitoring capabilities. This makes it more affordable but less suited for environments requiring detailed power analytics.
  • Basic vs. Switched PDUs: Switched PDUs allow remote control of individual outlets, which the AP9559 lacks. For users who don’t need remote management, the AP9559 offers a simpler, lower-cost alternative.
  • Horizontal vs. Vertical PDUs: The AP9559’s horizontal 1U design is ideal for racks with limited vertical space. However, APC also offers vertical PDUs for users needing more outlets or different mounting configurations.

Installation and Setup Tips

To get the most out of the APC AP9559, follow these best practices:

  1. Verify Power Requirements: Ensure your rack’s power source matches the PDU’s 16A, 208V/230V specifications to avoid overloading.
  2. Secure Mounting: Use the included rack mounting brackets to securely install the PDU in a standard 19-inch rack, ensuring proper alignment and stability.
  3. Cable Management: Organize power cables to prevent clutter and ensure easy access to outlets. Consider using cable ties or trays for a clean setup.
  4. Load Balancing: Distribute devices across the C13 and C19 outlets to avoid overloading any single circuit, keeping the total load within the 3680 VA capacity.
  5. Regular Inspections: Periodically check the PDU for signs of wear or overheating, especially in high-demand environments.

Conclusion

The APC AP9559 Rack PDU Basic 1U 16A 208&230V (10)C13 & (2)C19 is a reliable, cost-effective, and versatile solution for powering IT equipment in racks and cabinets. Its compact design, universal voltage support, and mix of C13 and C19 outlets make it a practical choice for small to medium data centers, enterprise IT environments, and edge computing setups. While it lacks advanced features like monitoring or remote control, its simplicity and affordability make it an excellent option for businesses prioritizing essential power distribution.

Whether you’re setting up a new server room or expanding an existing rack, the AP9559 delivers the performance and reliability you need to keep your equipment powered and operational. For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES.

May 16, 2025

APC Rack PDU, Switched, 2U, 32A, 230V, (16)C13 (AP7922B): Advanced Power Management for Data Centers

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social ,

In modern data centers and IT environments, efficient power distribution and management are critical for maintaining uptime and optimizing performance. The APC Rack PDU, Switched, 2U, 32A, 230V, (16)C13 (AP7922B) by Schneider Electric is a switched rack power distribution unit (PDU) designed to provide advanced load monitoring, remote outlet control, and robust power sequencing for servers, networking equipment, and other critical devices. This blog explores the features, specifications, benefits, and applications of the AP7922B, highlighting why it’s a top choice for IT professionals seeking reliable and intelligent power management.

Overview of the APC AP7922B

The APC AP7922B is a 2U, switched rack PDU with a 32A, 230V input and 16 IEC 60320 C13 outlets, delivering a maximum configurable power of 2200VA (1980W). It offers remote on/off switching for individual outlets, power sequencing to prevent inrush currents, and comprehensive network management capabilities via Web, SNMP, and Telnet. With features like local current monitoring, user-defined alarm thresholds, and a digital display, the AP7922B ensures precise control and visibility over power usage, making it ideal for data centers, server rooms, and enterprise IT environments.

Key Specifications

  • Model: AP7922B
  • Type: Switched Rack PDU
  • Rack Height: 2U
  • Input Voltage: 230V (200V–240V supported)
  • Input Current: 32A
  • Input Connection: IEC 60309 32A 2P+E
  • Input Frequency: 50/60 Hz
  • Output Connections: 16 x IEC 60320 C13
  • Maximum Configurable Power: 1980W (2200VA, 2.2kVA)
  • Number of Power Cords: 1
  • Cord Length: 3.05 meters
  • Dimensions: 88 mm (H) x 444 mm (W) x 112 mm (D)
  • Weight: 4.5 kg
  • Operating Temperature: -5–45°C
  • Operating Humidity: 5–95% (non-condensing)
  • Certifications: CE, EAC, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, VDE
  • Warranty: 2-year repair or replace
  • Environmental Compliance: RoHS, REACH, Mercury-free; Green Premium™ certified
  • Included Accessories: Documentation CD, installation guide, rack mounting brackets

Core Features and Benefits

1. Remote Individual Outlet Control

The AP7922B allows users to remotely manage each of its 16 C13 outlets, enabling power cycling of locked-up equipment, turning off unused outlets to prevent overloads, or restarting devices without physical access. This feature minimizes downtime and eliminates the need for on-site visits, saving time and costs.

2. Power Sequencing and Delays

Configurable power delays allow users to set the sequence in which outlets are powered on or off, preventing inrush currents that can overload circuits or cause dropped loads. This is particularly useful for ensuring dependent equipment, like servers relying on storage systems, powers on in the correct order.

3. Local Current Monitoring and Digital Display

A built-in digital display shows the aggregate current draw per PDU, helping installers avoid overloaded circuits. The local monitoring feature provides real-time visibility into power usage, with a load indicator LED alerting users to overload or warning conditions based on user-defined thresholds.

4. Network Management Capabilities

The AP7922B supports full-featured network management via Web, SNMP, and Telnet interfaces, allowing remote access, configuration, and monitoring. It integrates with Schneider Electric’s StruxureWare Data Center Expert for unified infrastructure management. Firmware upgrades are easily applied via network downloads, ensuring future-proof functionality.

5. Alarm Thresholds

Users can define alarm thresholds to prevent overloaded circuits, with network and visual alarms notifying administrators of potential issues. This proactive approach enhances system reliability and prevents costly downtime.

6. Energy Efficiency and Environmental Compliance

The AP7922B is certified as a Green Premium™ product, complying with RoHS and REACH regulations and being mercury-free. It features energy-efficient operation and supports Schneider Electric’s take-back program for responsible disposal, aligning with sustainability goals.

7. Robust Design and Easy Installation

The 2U rack-mountable design includes mounting brackets for secure installation in standard 19-inch racks. Its 3.05-meter power cord and compact dimensions (444 x 112 x 88 mm) ensure flexibility in deployment. The unit is pre-assembled and includes a documentation CD and installation guide for quick setup.

8. Flash Upgradeable

The PDU’s flash-upgradeable firmware allows for seamless updates to support new features or enhancements, extending the product’s lifespan without requiring hardware replacements.

Applications and Use Cases

The APC AP7922B is designed for environments requiring advanced power management and high availability, including:

  • Data Centers: Provides precise control and monitoring for servers, storage systems, and networking equipment in small to medium data centers.
  • Enterprise IT: Supports critical infrastructure in server rooms, ensuring uptime for business-critical applications.
  • Colocation Facilities: Enables remote outlet management and load balancing for multi-tenant environments.
  • Edge Computing: Powers distributed IT setups with reliable, remotely manageable power distribution.

Its 1980W capacity and 16 C13 outlets make it suitable for powering multiple devices, with the ability to manage high-density racks efficiently.

Why Choose the APC AP7922B?

Industry-Leading Reliability

APC by Schneider Electric is a trusted name in power management, with the AP7922B undergoing rigorous testing to meet CE, EAC, and VDE standards. Its robust design and 2-year warranty ensure long-term dependability.

Advanced Manageability

The switched PDU’s remote control, sequencing, and monitoring capabilities set it apart from basic PDUs, offering IT administrators granular control and real-time insights. Users report high satisfaction, with one reviewer on Redcorp.com noting its “industry-leading reliability and manageability” for server room applications.

Cost-Effective Scalability

Priced at approximately £881.93–£1281.71 (ex VAT) based on retailers like Critical Power Supplies and Redcorp, the AP7922B delivers advanced features at a competitive cost, reducing the need for additional management tools or on-site interventions.

Sustainable Design

The Green Premium™ certification and take-back program reflect Schneider Electric’s commitment to environmental responsibility, making the AP7922B a sustainable choice for eco-conscious organizations.

Installation and Maintenance Tips

  1. Setup: Mount the PDU in a 19-inch rack using the provided brackets. Connect the IEC 60309 32A plug to a compatible 230V power source and attach devices to the C13 outlets, ensuring the total load does not exceed 1980W.
  2. Network Configuration: Access the PDU’s web interface or SNMP to configure outlet sequences, alarms, and monitoring settings. Integrate with StruxureWare for advanced management.
  3. Monitoring: Regularly check the digital display and LED indicators for current draw and overload warnings. Set alarm thresholds to proactively manage power usage.
  4. Firmware Updates: Use the network interface to apply firmware upgrades, ensuring compatibility with new features or security patches.
  5. Recycling: Dispose of the unit through Schneider Electric’s take-back program to comply with WEEE regulations.

Considerations

  • Input Connector: The IEC 60309 32A input requires a compatible power source, which may necessitate infrastructure upgrades in some facilities.
  • Cost: While feature-rich, the AP7922B is pricier than basic PDUs, but its advanced management capabilities justify the investment for critical applications.
  • Cooling: Ensure adequate rack ventilation, as the PDU operates in temperatures up to 45°C but may generate heat under high loads.

Conclusion

The APC Rack PDU Switched 2U 32A 230V (16)C13 (AP7922B) is a powerful and intelligent solution for managing power in data centers and IT environments. Its remote outlet control, power sequencing, local monitoring, and network management capabilities provide unmatched flexibility and reliability. With a robust design, Green Premium™ certification, and integration with Schneider Electric’s ecosystem, the AP7922B is an ideal choice for IT professionals seeking to optimize power distribution and ensure uptime.

For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES. Empower your infrastructure with the AP7922B and experience advanced power management backed by APC’s industry-leading expertise.

May 16, 2025

APC Essential SurgeArrest PM5U-UK: Robust Surge Protection for Your Devices

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , ,

In today’s connected world, protecting sensitive electronics from power surges and spikes is crucial for homes, offices, and small businesses. The APC Essential SurgeArrest 5 outlets with 5V, 2.4A 2 port USB Charger 230V UK (PM5U-UK) by Schneider Electric is a professional-grade surge protector designed to safeguard computers, networking equipment, and mobile devices while offering convenient USB charging. This blog explores the features, specifications, benefits, and applications of the PM5U-UK, highlighting why it’s a reliable choice for power protection.

Overview of the APC Essential SurgeArrest PM5U-UK

The APC Essential SurgeArrest PM5U-UK is a compact, high-performance surge protector featuring five UK BS1363 outlets and two USB Type-A ports (5V, 2.4A) for charging smartphones, tablets, and other devices. With a surge energy rating of 918 Joules and a fail-safe mode, it provides robust protection against lightning strikes, power surges, and wiring faults. Designed for the UK market (230V), it complies with stringent safety standards and includes features like EMI/RFI noise filtering and a resettable circuit breaker. Its sleek design and practical features make it ideal for home and office environments.

Key Specifications

  • Model: PM5U-UK
  • Outlets: 5 x UK BS1363
  • USB Ports: 2 x USB Type-A (5V, 2.4A shared)
  • Nominal Input Voltage: 230V
  • Input Frequency: 50 Hz ± 5 Hz
  • Input Connection: British BS1363A plug
  • Cord Length: 1.83 meters
  • Maximum Input Current: 13.0A
  • Surge Energy Rating: 918 Joules
  • Peak Current: 12 kAmps (Normal Mode), 24 kAmps (Common Mode)
  • Response Time: 1 ns
  • Let-Through Rating: <15% (worldwide standard)
  • Dimensions: 56 mm (H) x 385 mm (W) x 73 mm (D)
  • Weight: 0.72 kg
  • Color: White
  • Operating Temperature: 0–40°C
  • Operating Humidity: 0–90% (non-condensing)
  • Certifications: CE, KEMA, RoHS, IEC 61643-11
  • Warranty: Lifetime (equipment protection policy up to £50,000)

Core Features and Benefits

1. Comprehensive Surge Protection

The PM5U-UK offers a 918-Joule surge energy rating, effectively absorbing energy from power surges and lightning strikes. Its Metal Oxide Varistors (MOVs) and thermal fuse react instantly to divert excess voltage, ensuring no damaging surges reach connected devices. Unlike many surge suppressors, APC’s fail-safe mode disconnects equipment from the power supply if the surge protection circuit is compromised, preventing exposure to future surges.

2. IEEE Let-Through Ratings

APC surge protectors undergo rigorous IEEE testing, earning a let-through rating of less than 15% for worldwide products, indicating superior protection. This ensures that minimal voltage reaches your equipment during a surge, safeguarding sensitive electronics like computers and routers.

3. USB Charging Convenience

The two USB Type-A ports (5V, 2.4A shared) allow simultaneous charging of mobile devices, reducing the need for separate chargers. This feature is ideal for home offices or workstations where smartphones and tablets are in constant use.

4. EMI/RFI Noise Filtering

The PM5U-UK attenuates electromagnetic and radio frequency interference (EMI/RFI), which can cause data errors or keyboard lockups in sensitive equipment. This ensures cleaner power delivery and better performance for devices like PCs and AV systems.

5. Fail-Safe Mode and Protection Indicators

The fail-safe mode ensures that if the surge protection circuit is damaged, the unit stops passing power, protecting your equipment. A Protection Working Indicator LED alerts users if the circuitry is compromised, and a Building Wiring Fault Indicator detects dangerous wiring issues in the wall circuit. If under warranty, APC replaces damaged units free of charge.

6. Resettable Circuit Breaker

The PM5U-UK features a resettable circuit breaker for easy recovery from overloads, eliminating the need to replace fuses. This enhances user convenience and reduces maintenance costs.

7. Compact and Practical Design

With a 1.83-meter cord and a right-angle plug, the PM5U-UK accommodates tight spaces and reduces cord stress. Its compact dimensions (56 x 385 x 73 mm) and lightweight design (0.72 kg) make it easy to place on desks or mount on walls.

8. Eco-Friendly Disposal

The PM5U-UK complies with EU waste collection regulations, ensuring proper recycling through Schneider Electric’s take-back program. This aligns with environmental sustainability goals.

Applications and Use Cases

The APC Essential SurgeArrest PM5U-UK is designed for:

  • Home Offices: Protects computers, monitors, routers, and USB-charged devices like smartphones and tablets.
  • Small Businesses: Safeguards point-of-sale systems, networking equipment, and office electronics from surges.
  • Entertainment Systems: Shields TVs, gaming consoles, and audio equipment from power fluctuations.
  • Educational Settings: Ensures reliable power for classroom computers and projectors.

Its 918-Joule rating and USB charging ports make it versatile for environments requiring both surge protection and device charging.

Why Choose the APC PM5U-UK?

Proven Reliability

APC by Schneider Electric is a trusted name in power protection, with products undergoing stringent testing to meet global safety standards (CE, KEMA, IEC 61643-11). The PM5U-UK’s lifetime warranty and £50,000 equipment protection policy provide peace of mind.

Cost-Effective Protection

Priced competitively (around £30–£40 based on retailers like Comms Express and UPSBuyer), the PM5U-UK offers professional-grade protection at an affordable cost. Its durability and fail-safe design reduce the risk of costly equipment damage.

User-Friendly Features

The PM5U-UK has received positive feedback for its ease of use and functionality. While specific recent reviews are limited, customers on sites like Amazon UK praise similar APC SurgeArrest models for their reliability and USB charging convenience, with ratings averaging 4.5 stars. The resettable breaker and LED indicators simplify operation.

Installation and Maintenance Tips

  1. Setup: Plug the PM5U-UK into a properly grounded 230V UK outlet. Connect devices to the BS1363 outlets and USB ports, ensuring the total load does not exceed 13A.
  2. Placement: Position the unit in a well-ventilated area (0–40°C). Use the right-angle plug to fit behind furniture or mount on a wall.
  3. Monitoring: Check the Protection Working and Wiring Fault LEDs regularly. If the protection LED is off, contact APC for a warranty replacement.
  4. Recycling: Dispose of the unit through Schneider Electric’s recycling program to comply with EU regulations.
  5. Overload Recovery: If the circuit breaker trips, unplug some devices and reset the breaker to restore power.

Considerations

  • No Data Line Protection: Unlike some APC models, the PM5U-UK does not offer Ethernet, coaxial, or phone line surge protection. Consider additional protectors for data lines if needed.
  • USB Output: The 2.4A shared USB output may be slower for charging multiple high-power devices simultaneously compared to modern fast chargers.
  • Warranty Claims: Ensure proper grounding and registration for the £50,000 equipment protection policy to be valid.

Conclusion

The APC Essential SurgeArrest PM5U-UK is a reliable, user-friendly surge protector that combines robust surge protection with convenient USB charging for home and office environments. Its 918-Joule rating, fail-safe mode, EMI/RFI filtering, and IEEE-tested performance ensure your electronics are safe from power surges and spikes. With a lifetime warranty, eco-friendly disposal, and a compact design, the PM5U-UK is an excellent investment for protecting computers, networking gear, and mobile devices.

For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES. Safeguard your electronics with the PM5U-UK and enjoy peace of mind with APC’s trusted power protection.

May 16, 2025

APC Replacement Battery Cartridge #55 (RBC55): Powering Your UPS with Confidence

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , ,

In environments where uninterrupted power is critical—whether for home offices, small businesses, or IT departments—the reliability of an uninterruptible power supply (UPS) depends on its battery. The APC Replacement Battery Cartridge #55 (RBC55) is a high-quality, sealed lead-acid battery pack designed to restore and maintain the performance of select APC Smart-UPS and Back-UPS models. Manufactured by APC by Schneider Electric, a global leader in power protection, the RBC55 ensures your UPS delivers dependable backup power during outages or surges. This blog explores the features, specifications, compatibility, benefits, and practical applications of the RBC55 to help you keep your critical systems running smoothly.

Overview of the APC RBC55

The APC Replacement Battery Cartridge #55 (RBC55) is a maintenance-free, leak-proof, sealed lead-acid battery cartridge engineered for compatibility with a wide range of APC Smart-UPS and Back-UPS models, such as the SMT2200, SMT3000, SUA2200, and SUA3000 series. With a 12V, 17Ah capacity, it restores UPS performance to its original specifications, providing reliable power backup for servers, networking equipment, and other sensitive devices. The RBC55 is hot-swappable, fully assembled, and backed by a 2-year warranty, making it a convenient and trusted solution for extending the life of your UPS.

Key Specifications

  • Model: RBC55
  • Battery Type: Sealed lead-acid (VRLA), maintenance-free, leak-proof
  • Voltage and Capacity: 12V, 17Ah (typically four 12V batteries wired together)
  • Battery Life: 3–5 years (depending on usage and environment)
  • Warranty: 2-year repair or replace
  • Dimensions: 173 mm (H) x 142 mm (W) x 183 mm (D)
  • Weight: Approximately 24.27 kg
  • Operating Conditions: 0–40°C, 0–95% relative humidity (non-condensing)
  • Storage Conditions: -15–45°C, 0–95% relative humidity
  • Certifications: UL, VDE, CSA, RoHS-compliant
  • Battery Quantity: 1 cartridge (containing four battery cells)

Core Features and Benefits

1. Guaranteed Compatibility

The RBC55 is rigorously tested by APC to ensure seamless integration with compatible Smart-UPS and Back-UPS models. It maintains UPS safety certifications (UL, VDE, CSA) and adheres to the original equipment protection policies, ensuring optimal performance and reliability.

2. Hot-Swappable Design

The hot-swappable feature allows trained users to replace the battery without powering down the UPS or connected devices, minimizing downtime. This is critical for mission-critical applications like server rooms or network closets, where uninterrupted operation is essential.

3. Long Battery Life

With an expected lifespan of 3–5 years, the RBC55 provides dependable performance under normal operating conditions. Its low self-discharge rate and spill-proof design make it suitable for diverse environments, from offices to industrial settings.

4. Easy Installation

The RBC55 comes fully assembled with high-current, gas-tight crimped connections and fuses, simplifying installation. It includes all necessary connectors, a battery recycling guide, and clear instructions, enabling quick replacements even for non-technical users. The process typically takes just a few minutes.

5. Eco-Friendly Recycling

APC’s recycling program provides prepaid postage and reusable packaging for returning old batteries to certified recycling facilities, with nearly 100% of the lead content reused. This environmentally responsible approach complies with international regulations and simplifies disposal.

6. Reliable Performance

Each RBC55 is tested to restore UPS performance to its original specifications, ensuring clean, uninterrupted power during outages or surges. User reviews highlight its reliability, with one customer noting that the RBC55 extended their SUA3000’s life by another 8 years, avoiding the cost of a new UPS.

Compatible UPS Models

The RBC55 is compatible with a wide range of APC Smart-UPS and Back-UPS models, including but not limited to:

  • Smart-UPS SMT Series: SMT2200, SMT2200I, SMT2200US, SMT3000, SMT3000I
  • Smart-UPS SUA Series: SUA2200, SUA2200I, SUA2200XL, SUA3000, SUA3000I, SUA3000XL, SUA3000XLT
  • Other Models: SUA48XLBP, SUA5000RMT5U, SUA5000R5TXFMR, DLA2200, DLA2200I, NECA3000JW
  • Additional Models: SUA2200UXI, SUA2200UXICH, SUA3000UXI, SUA3000UXICH

For a complete list, check the “View Compatible UPS Models” section on APC’s official website (www.apc.com) or consult your UPS manual.

Applications and Use Cases

The RBC55 is designed for environments requiring reliable power backup, including:

  • Small to Medium Businesses: Restores UPS performance for servers, point-of-sale systems, and networking equipment in offices or retail settings.
  • IT Departments: Ensures uninterrupted power for critical infrastructure in small data centers or edge computing setups.
  • Home Offices: Maintains backup power for high-end workstations, NAS devices, or home servers.
  • Healthcare and Education: Supports sensitive equipment in labs, clinics, or classrooms where power stability is critical.

Its 816 VAh capacity provides scalable runtime, typically offering 10–30 minutes of backup power depending on the load, allowing for graceful shutdowns or bridging short outages.

Why Choose the APC RBC55?

Proven Reliability

APC by Schneider Electric is renowned for its rigorous quality control, demanding the highest standards from battery suppliers and monitoring battery health during storage. The RBC55 is manufactured under ISO 9001 standards, ensuring consistent performance and safety.

Cost-Effective Solution

Replacing the RBC55 is significantly cheaper than purchasing a new UPS, extending the life of your existing system. Users report savings of thousands of dollars by opting for a battery replacement over a full UPS upgrade.

User-Friendly Experience

The RBC55 has a 4.5-star rating based on 24 reviews on CDW.com, with users praising its ease of installation and performance. One reviewer noted, “The replacement batteries were shipped on time and arrived sooner than expected. They are easy to install and extend the life of my UPS.”

Installation and Maintenance Tips

  1. Confirm Compatibility: Verify your UPS model is compatible using APC’s website or product documentation.
  2. Safety Precautions: Handle the cartridge carefully due to its 24.27 kg weight. Ensure the UPS is in a stable, well-ventilated area (0–40°C).
  3. Installation Process:
    • Open the UPS battery compartment (consult the manual for specifics).
    • Disconnect and remove the old cartridge.
    • Connect the RBC55 using the provided connectors, ensuring a secure fit.
    • Close the compartment and verify the UPS recognizes the new battery.
  4. Recycling: Use APC’s recycling program to dispose of the old battery responsibly.
  5. Maintenance: Monitor battery status via the UPS’s management interface and plan replacements every 3–5 years.

Considerations

  • Specific Compatibility: The RBC55 is designed for specific Smart-UPS and Back-UPS models, so confirm compatibility before purchasing.
  • Cost vs. Third-Party Options: While genuine APC cartridges may cost more than third-party alternatives, they offer guaranteed compatibility, safety, and warranty support. Third-party batteries risk poor performance or UPS damage.
  • Weight: The 24.27 kg cartridge may require two people for safe handling during installation.

Conclusion

The APC Replacement Battery Cartridge #55 (RBC55) is a reliable, user-friendly, and eco-conscious solution for maintaining the performance of select APC Smart-UPS and Back-UPS systems. Its hot-swappable design, guaranteed compatibility, and robust 3–5-year lifespan make it an ideal choice for businesses, IT professionals, and home office users seeking to protect critical devices from power disruptions. By choosing the RBC55, you extend the life of your UPS, reduce waste, and ensure uninterrupted power with the trusted backing of APC by Schneider Electric.

For more details or to purchase, CONTACT US @ TIACO TECHNOLOGIES. Keep your UPS powered and your systems protected with the RBC55—your lifeline for reliable power backup.

May 16, 2025

APC Replacement Battery Cartridge #152 (APCRBC152): A Reliable Power Backup Solution

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social , ,

In an era where uninterrupted power is critical for businesses, home offices, and IT infrastructures, the reliability of an uninterruptible power supply (UPS) hinges on its battery. The APC Replacement Battery Cartridge #152 (APCRBC152) is a high-quality, purpose-built solution designed to restore and maintain the performance of select APC Smart-UPS On-Line models. Manufactured by APC by Schneider Electric, a trusted leader in power protection, this battery cartridge ensures your UPS delivers dependable backup power. In this blog, we’ll explore the features, specifications, compatibility, benefits, and practical applications of the APCRBC152 to help you make an informed decision about maintaining your UPS system.

Overview of the APCRBC152

The APC Replacement Battery Cartridge #152 is a sealed, maintenance-free, lead-acid battery cartridge designed specifically for compatibility with certain APC Smart-UPS On-Line models, such as the SRT3000 series. With a 12V, 5Ah capacity, it is engineered to restore UPS performance to its original specifications, providing reliable power backup for critical devices like servers, networking equipment, and workstations. The APCRBC152 is hot-swappable, fully assembled, and backed by a 2-year warranty, making it a convenient and dependable choice for IT professionals and businesses.

Key Specifications

  • Model: APCRBC152
  • Battery Type: Sealed lead-acid, maintenance-free, leak-proof
  • Voltage and Capacity: 12V, 5Ah
  • Expected Battery Life: 3–5 years
  • Warranty: 2-year repair or replace
  • Compatibility: Select APC Smart-UPS On-Line models (e.g., SRT3000RMXLI, SRT3000XLI, SRT96BP)
  • Certifications: UL, VDE, CSA; complies with safety and environmental regulations
  • Weight: Approximately 2.5 kg
  • Dimensions: Varies by UPS model; compact for easy installation
  • Operating Conditions: 0–40°C, 0–95% relative humidity (non-condensing)

Core Features and Benefits

1. Guaranteed Compatibility

The APCRBC152 is designed and tested by APC by Schneider Electric to ensure 100% compatibility with specific APC Smart-UPS On-Line models. It maintains UPS safety certifications (UL, VDE, CSA) and adheres to the original equipment protection policies, ensuring seamless integration with the UPS’s intelligent battery management system.

2. Hot-Swappable Design

The cartridge is hot-swappable, allowing trained users to replace the battery without powering down connected devices or causing network downtime. This feature minimizes the Mean Time to Repair (MTTR) and maximizes system availability, which is critical for mission-critical applications.

3. Long Battery Life

With an expected lifespan of 3–5 years under normal operating conditions, the APCRBC152 offers reliable performance and extends the useful life of your UPS. Its low self-discharge rate and spill-proof design make it suitable for various environments.

4. Easy Installation

The APCRBC152 ships fully assembled with minimal connections, enabling quick and straightforward installation. Clear instructions and a plug-and-play design mean even non-technical users can perform replacements with confidence.

5. Eco-Friendly Recycling Program

APC provides prepaid postage to nearby recycling partners (availability varies by country), ensuring nearly 100% of the old battery is recycled. This environmentally responsible approach aligns with green compliance standards and simplifies disposal.

6. Reliable Performance

Each cartridge is rigorously tested to restore UPS performance to its original specifications. Users report high satisfaction, with one IT manager noting that replacing the battery in an SRT3000RMXLI took less than 10 minutes and restored full backup capacity for their server room.

Compatible UPS Models

The APCRBC152 is compatible with a range of APC Smart-UPS On-Line models, including but not limited to:

  • SRT1500XLI
  • SRT3000RMXLA, SRT3000RMXLA-NC, SRT3000RMXLI, SRT3000RMXLI-NC
  • SRT3000RMXLT, SRT3000RMXLT-5KTF, SRT3000RMXLT-NC
  • SRT3000RMXLW-IEC, SRT3000XLA, SRT3000XLA-TW, SRT3000XLAUS
  • SRT3000XLI, SRT3000XLT, SRT3000XLT-5KTF, SRT3000XLTW, SRT3000XLW-IEC
  • SRT96BP, SRT96RMBP
  • SURTA3000RMXL3U, SURTD3000RMXLI, SURTD3000XLI

To confirm compatibility, visit the “View Compatible UPS Models” section on APC’s official website (www.apc.com).

Applications and Use Cases

The APCRBC152 is ideal for environments requiring reliable power backup, including:

  • Small to Medium Businesses: Restores UPS performance for servers, networking gear, and point-of-sale systems.
  • Data Centers and IT Departments: Ensures uninterrupted power for critical infrastructure in edge computing or small server rooms.
  • Home Offices: Maintains backup power for high-end workstations, NAS devices, or home servers.
  • Healthcare and Education: Supports sensitive equipment in labs, clinics, or classrooms where power stability is essential.

Why Choose the APCRBC152?

Proven Quality

APC by Schneider Electric is a trusted name in power protection, with rigorous quality control for its battery suppliers. The APCRBC152 is manufactured under ISO 9001 standards, ensuring consistent performance and safety.

Cost-Effective Maintenance

Replacing the battery cartridge is a cost-effective way to extend the life of your UPS without purchasing a new unit. While some users note the higher cost compared to third-party alternatives, the APCRBC152’s guaranteed compatibility, warranty, and performance justify the investment.

User-Friendly Experience

The cartridge has received positive feedback for its ease of installation and reliability. On Amazon UK, it holds a 4.1-star rating based on 7 reviews, with users praising its hot-swappable design and compatibility.

Installation and Maintenance Tips

  1. Verify Compatibility: Confirm your UPS model is compatible using APC’s website or product documentation.
  2. Safety Precautions: Handle the cartridge carefully due to its weight (two people may be needed for safe handling). Ensure the UPS is in a stable, well-ventilated area.
  3. Installation: Power down the UPS if not hot-swapping, remove the old cartridge, and insert the APCRBC152 as per the provided instructions. No tools are typically required.
  4. Recycling: Use APC’s recycling program to dispose of the old battery responsibly.
  5. Regular Checks: Monitor the UPS’s battery status via its management interface to anticipate replacement needs every 3–5 years.

Considerations

  • Specific Compatibility: The APCRBC152 is only compatible with select Smart-UPS On-Line models, so double-check your UPS model before purchasing.
  • Cost: Genuine APC cartridges may be pricier than third-party options, but they offer unmatched reliability and warranty support.
  • Weight: The cartridge’s weight may require careful handling during installation.

Conclusion

The APC Replacement Battery Cartridge #152 (APCRBC152) is an essential component for maintaining the reliability and performance of select APC Smart-UPS On-Line systems. Its hot-swappable, maintenance-free design, guaranteed compatibility, and eco-friendly recycling program make it a practical and sustainable choice for businesses, IT professionals, and home office users. By investing in the APCRBC152, you ensure your critical devices remain protected during power disruptions, extending the life of your UPS with minimal effort.

For more information or to purchase, CONTACT US @ TIACO TECHNOLOGIES. Don’t let a worn-out battery compromise your power protection—choose the APCRBC152 for peace of mind and uninterrupted performance.

May 16, 2025

Understanding the APC Smart-UPS 1500VA: A Reliable Power Protection Solution

Post By admin Art, Enterprise, Enterprise, Events, Events, Gadgets, News, News, Places, Podcasts, Social ,

In today’s technology-driven world, ensuring uninterrupted power for critical electronics is essential for businesses and IT professionals. The APC Smart-UPS, Line Interactive, 1500VA, Tower, 230V, 8x IEC C13 outlets, SmartSlot, AVR, LCD (SMT1500I) is a robust uninterruptible power supply (UPS) designed to deliver reliable power protection for servers, networking equipment, and other sensitive devices. In this blog, we’ll explore the key features, benefits, and applications of this UPS, making it clear why it’s a trusted choice for maintaining business continuity.

Overview of the APC Smart-UPS SMT1500I

The APC Smart-UPS SMT1500I is a line-interactive UPS with a 1500VA (1000W) capacity, designed to provide pure sine wave power during outages and protect against power disruptions like surges, sags, and brownouts. Its tower form factor, 230V input/output, and 8x IEC C13 outlets make it versatile for various environments, from small offices to enterprise data centers. Equipped with Automatic Voltage Regulation (AVR), a multifunction LCD display, and a SmartSlot for optional management cards, this UPS combines efficiency, reliability, and intelligent management.

Key Specifications

  • Capacity: 1500VA / 1000W
  • Topology: Line Interactive
  • Input Voltage: 230V (configurable for 220V or 240V)
  • Output: 8x IEC C13 outlets, 2x IEC jumper cables
  • Input Connection: IEC 320 C14
  • Battery: Sealed lead-acid, user-replaceable (RBC7)
  • Runtime: Approximately 408 VAh, with a 3-hour recharge time
  • Dimensions: 21.9 cm (H) x 17.1 cm (W) x 43.9 cm (D)
  • Weight: 24.09 kg
  • Warranty: 3 years for UPS, 2 years for battery
  • Certifications: CE, EAC, RCM, VDE, EN/IEC 62040-1, EN/IEC 62040-2

Core Features and Benefits

1. Pure Sine Wave Output

The SMT1500I delivers a pure sine wave output, which is critical for powering sensitive electronics like servers, routers, and switches. Unlike modified sine wave UPS systems, pure sine wave ensures compatibility and prevents damage to high-end equipment during power transitions.

2. Automatic Voltage Regulation (AVR)

AVR stabilizes input voltage fluctuations (151–302V adjustable) without relying on battery power, extending battery life and ensuring consistent power delivery. This feature is particularly valuable in regions with unstable power grids.

3. Intelligent Battery Management

APC’s intelligent battery management system maximizes battery performance through precision temperature-compensated charging. The UPS also features a dynamic battery replacement date indicator and automatic self-tests to ensure reliability and provide advance warnings for battery replacement.

4. SmartSlot for Enhanced Management

The SmartSlot allows for the addition of a Network Management Card (sold separately), enabling remote monitoring, graceful shutdowns of servers and virtual machines via PowerChute Network Shutdown, and integration with platforms like EcoStruxure IT. This is ideal for IT administrators managing distributed networks.

5. Multifunction LCD Display

The intuitive LCD interface provides real-time status updates, including load capacity, battery status, and runtime estimates. This user-friendly console simplifies configuration and troubleshooting, reducing downtime.

6. Energy Efficiency

The SMT1500I features a patented green operating mode, achieving efficiencies over 97%, making it one of the first UPS systems to earn Energy Star certification. This reduces utility costs and heat generation, contributing to a lower total cost of ownership.

7. Surge Protection and Noise Filtering

With a surge energy rating of 459 Joules and full-time multi-pole noise filtering, the UPS protects connected devices from lightning strikes, surges, and electromagnetic interference, ensuring clean power delivery.

8. Cold-Start Capability

The UPS can provide temporary battery power even when utility power is unavailable, allowing critical systems to remain operational during complete outages.

Applications and Use Cases

The APC Smart-UPS SMT1500I is designed for IT professionals and network administrators who need reliable power protection for:

  • Small to Medium Businesses: Protects servers, point-of-sale systems, and networking equipment in offices or retail environments.
  • Data Centers: Supports critical infrastructure in small data centers or edge computing setups.
  • Home Offices: Ensures uptime for high-end workstations, NAS devices, or home servers.
  • Healthcare and Education: Safeguards sensitive equipment in labs, clinics, or classrooms where power stability is critical.

Its 1500VA capacity is ideal for powering multiple devices, with runtime estimates varying based on load. For example, at 500W, it can provide approximately 20–30 minutes of runtime, allowing for graceful shutdowns or bridging short outages.

Why Choose the APC Smart-UPS SMT1500I?

Proven Reliability

With over 25 million Smart-UPS units sold worldwide, APC is a trusted name in power protection. The SMT1500I is backed by a 3-year warranty (2 years for the battery) and is designed for durability, with a battery life of 3–5 years.

Scalable and Flexible

The UPS supports customizable configurations, such as adjustable output voltages (220V, 230V, or 240V) and optional management cards for enhanced functionality. Its hot-swappable battery design allows replacements without powering down connected devices.

Comprehensive Support

The package includes a USB cable, RS-232 signaling cable, documentation CD, and installation guide, ensuring easy setup. APC also offers robust customer support and replacement battery cartridges (RBC7) to maintain performance.

Installation and Maintenance Tips

  1. Setup: Place the UPS in a well-ventilated area with temperatures between 0–40°C. Connect devices to the IEC C13 outlets, ensuring the total load does not exceed 1000W.
  2. Battery Maintenance: Perform regular self-tests via the LCD console and replace the battery every 3–5 years or when indicated.
  3. Remote Management: Consider adding a Network Management Card for remote monitoring and automated shutdowns.
  4. Firmware Updates: Use the SmartSlot or USB interface to keep firmware up to date for optimal performance.

Conclusion

The APC Smart-UPS SMT1500I is a versatile and efficient solution for protecting critical electronics from power disruptions. Its combination of pure sine wave output, AVR, intelligent battery management, and advanced monitoring capabilities makes it an excellent choice for businesses and IT professionals seeking reliable power protection. Whether you’re safeguarding servers, networking gear, or sensitive equipment, this UPS delivers peace of mind with its proven performance and industry-leading features.

For more details, CONTACT US @ TIACO TECHNOLOGIES to explore how the SMT1500I can meet your power protection needs.